Among the techniques used to improve materials performance, deposition on the surface of components is a proper way of recovering worn elements. Thermal spraying processes were developed during the last few years and they are a very suitable method to obtain layers with high hardness for protecting or repairing the base component. Employing these processes, it is possible to overlay metallic substrates with polymers, metals and ceramics. Among these processes are: HVOF, Arc-Spray and Flame-Spray. The selection of a particular type of stainless steel for an application involves some considerations, as the corrosion resistance of the alloy, mechanical properties, manufacture feasibility and cost. In this work, used were samples of AISI 1045 steel, coated with stainless steel AISI 420, using the techniques of Arc-Spray, HVOF and Flame-Spray for the comparative study of their corrosion resistance in sea water, aimed at producing low-cost alternative pieces, compared with massive pieces of steel. The best performances in terms of hardness, porosity levels and corrosion resistance of the layers occurred in the following sequence growing: Flame-Spray, Arc-Spray, and HVOF.
Thermal spray; corrosion; AISI 420
