Figure 1
Exemplos de acessórios usados em linhas de ancoragem [55 KIVTRUD, A., “Lessons learned from the norwegian mooring lines failures 2010-2013”, In: Proc. of the 33rd Int. Conf. on ‘Ocean, Offshore and Arctic Engineering San Francisco, USA, June 2014.,88 SANTOS FILHO, O.R., DINIZ, J.L.C., COELHO, M.J.S., et al., “Avaliação de juntas soldadas de um aço fundido de alta resistência para a indústria offshore”, Soldagem & Inspeção, v.23, n.2, pp.205-224, 2018.,1919 OLIVEIRA, E.M., JORGE. J.C.F., SOUZA, L.F.G., “Efeito de tratamento térmico pós-soldagem nas propriedades mecânicas de juntas soldadas de aço fundido de alta resistência mecânica”, In: Anais do 69o Congresso Internacional da ABM, Jul 21-25; São Paulo, Brasil. São Paulo, Associação Brasileira de Metalurgia e Materiais, pp.1-12, 2014.].
Figura 12
Relação entre a resistência mecânica e energia absorvida (-40 °C) após soldagem obtida no presente trabalho (ponto indicado pela seta) em comparação com outros resultados disponíveis na literatura [1818 AMERICAN BUREAU OF SHIPPING. Rules for Building and Classing Steel Vessel Rules Part 2, Rules for Materials and Welding. Houston, ABS, pp. 40-44. Chapter 1: Materials for Hull Construction, Section 5 Hull Steel Casting, 2013.
19 OLIVEIRA, E.M., JORGE. J.C.F., SOUZA, L.F.G., “Efeito de tratamento térmico pós-soldagem nas propriedades mecânicas de juntas soldadas de aço fundido de alta resistência mecânica”, In: Anais do 69o Congresso Internacional da ABM, Jul 21-25; São Paulo, Brasil. São Paulo, Associação Brasileira de Metalurgia e Materiais, pp.1-12, 2014.
20 AMERICAN WELDING SOCIETY. Specification for low alloy steel electrodes for shielded metal arc welding - AWS 5.5. Miami, AWS, 1996.
21 GOMES, A.J.M., JORGE. J.C.F., SOUZA, L.F.G., et al., “Influence of chemical composition and post welding heat treatment on the microstructure and mechanical properties of high strength steel weld metals”, Materials Science Forum, v.759, pp.21–32, 2013.-2222 JORGE, J.C.F., FARAGASSO, S.M., SOUZA, L.F.G., et al., “Effect of post welding heat treatment on the mechanical and microstructural properties of extra high-strength steel weld metals for application on mooring equipment”, Welding International, v. 29, pp.521–529, 2015.,2424 FARNEZE, H.N., JORGE. J.C.F., SOUZA, L.F.G., BOTT, I.S., “Comparative study of high-strength steel weld metals obtained by the SMAW and FCAW processes for offshore applications and mooring chains”, Welding International, v.24, pp.903–910, 2010.
25 LINS JUNIOR, A.S., COSTA, H.R.M., SOUZA, L.F.G., et al., “Propriedades mecânicas e microestruturais de juntas soldadas do aço HY-80 pelos processos eletrodo revestido e GMAW”, Soldagem & Inspeção, v.19, n.3, pp.200-211, 2014.-2626 LORD, M., JENNINGS, G. “Effect of interpass temperature on properties of high-strength weld metals”, Svetsaren, v.54, n.1-2, pp.53-58, 1999.,4949 KARLSSON, L., SVENSSON, L.E., HURTIG, K., “Influence of dilution on properties of high strength steel weld metals”, Biuletyn Instytutu Spawalnictwa, v.5, pp.62-70, 2014.
50 GIANETTO, J.A., SMITH, N.K., MCGRATH, J.T., et al., “Effect of composition and energy input on structure and properties of high-strength weld metals”, Welding Journal, v.72, n.11, pp.407s-419s, 1992.
51 ZHANG, T., LI, Z., MA, S., et al., “High strength steel (600–900 MPa) deposited metals: microstructure and mechanical properties”, Science and Technology of Welding and Joining, v.21, n.3, pp.186-193, 2016.
52 SCHNITZER, R., ZUGNER, D., HASLBERGER, P., et al., “Influence of alloying elements on the mechanical properties of high-strength weld metal”, Science and Technology of Welding and Joining, v.22, pp.536-543, 2017.
53 BEIDOKHTI, B., POURIAMANESH, R., “Effect of filler metal on mechanical properties of HSLA welds”, Welding Journal, v.94, n.10, pp.334s-341s, 2015.
54 SURIAN, E.S., TROTTI, J., CASSANELLI, A., et al., “Influence of chromium on the mechanical properties and microstructure of weld metal from a high strength SMA electrode”, Welding Journal, v. 74, n.3, p.45s-53s, 1994.
55 SURIAN, E.S., TROTTI, J., HERRERA, R., et al., “Influence of carbon on mechanical properties and microstructure of weld metal from a high-strength SMA electrode”, Welding Journal, v.70, n.10, pp.133s-140s, 1991.
56 KEEHAN, E., KARLSSON, L., ANDRÉN, H.O., “Influence of carbon, manganese and nickel on microstructure and properties of strong steel weld metals, Part 1—effect of nickel content”, Science and Technology of Welding and Joining, v.11, pp.1-8, 2006.
57 SURIAN, E.S., RISSONI, M.R., de VEDIA, L.A., “Influence of Molybdenum on Ferritic High-Strength SMAW All-Weld-Metal Properties”, Welding Journal, v.85, n.4, pp.53s-62s, 2005.
58 LEE, H., “Effect of Cr content on microstructure and mechanical properties of low carbon steel welds”, International Journal of Electrochemical Science, v.10, pp.8028-8040, 2015.-5959 KIM, S., LEE, E., CHOI, Y., et al., “A study on the material characteristics and the welding properties of the HSA800 steel”, International Journal of Steel Structures, v.17, n.2, pp.821-831, 2017.].
