Acessibilidade / Reportar erro
Articles • Matéria (Rio J.) 20 (2) • June 2015 • https://doi.org/10.1590/S1517-707620150002.0032   copy

Obtaining S-phase layer: Glow-discharge nitriding at low temperature x SHTPN - Part 2

Authorship SCIMAGO INSTITUTIONS RANKINGS

Samples of austenitic stainless steel ISO 5832-1 showing nitrogen-rich surface layer (S-phase), obtained by plasma nitriding at low temperature and SHTPN (Solution Heat Treatment after Plasma Nitriding) processes, characterized in previous work, and samples in starting microstructure, in other words, solubilized and plasma samples nitrided at 750° C for 3 hours, were tested for corrosion resistance. The corrosion resistance was evaluated based on the potentiodynamic anodic polarization test and open circuit measurements of corrosion potential (OCP) using 0.5 M NaCl. The results confirmed the gain in localized corrosion resistance from the nitrogen in solid solution in both low-temperature nitriding and SHTPN process, as well as from the deleterious effect of precipitation of chromium nitride.

Plasma nitriding; SHTPN; S-phase; ISO 5832-1; corrosion

Laboratório de Hidrogênio, Coppe - Universidade Federal do Rio de Janeiro, em cooperação com a Associação Brasileira do Hidrogênio, ABH2 Av. Moniz Aragão, 207, 21941-594, Rio de Janeiro, RJ, Brasil, Tel: +55 (21) 3938-8791 - Rio de Janeiro - RJ - Brazil
E-mail: revmateria@gmail.com
Acompanhe os números deste periódico no seu leitor de RSS