Resumo em Inglês:Fertilizer application at variable rates requires dense sampling to determine the resulting field spatial variability. Defining management zones is a technique that facilitates the variable-rate application of agricultural inputs. The apparent electrical conductivity of the soil is an important factor in explaining the variability of soil physical-chemical properties. Thus, the objective of this study was to define management zones for coffee (Coffea Arabica L.) production fields based on spatial variability of the apparent electrical conductivity of the soil. The resistivity method was used to measure the apparent soil electrical conductivity. Soil samples were collected to measure the chemical and physical soil properties. The maps of spatial variability were generated using ordinary kriging method. The fuzzy k-means algorithm was used to delimit the management zones. To analyze the agreement between the management zones and the soil properties, the kappa coefficients were calculated. The best results were obtained for the management zones defined using the apparent electrical conductivity of the soil and the digital elevation model. In this case, the kappa coefficient was 0.45 for potassium, which is an element that is associated with quality coffee. The other variable that had a high kappa coefficient was remaining phosphorous; the coefficient obtained was 0.49. The remaining phosphorus is an important parameter for determining which fertilizers and soil types to study.
Resumo em Inglês:This study evaluates the technology and work systems used in order to harvest residual biomass from pruning in the specific conditions of Mediterranean fruit orchards (narrow distances between crop-rows). Harvesting has been divided into several types of operations - pruning, biomass alignment between crop tracks, biomass concentration in piles, chipping and bundling - which have been analyzed in five Mediterranean cultivations for three years. Altogether, three types of pruning have been analyzed: Manual, previous mechanical followed by manual, and fully mechanical; Two types of alignment: Manual and mechanical; Three concentration systems: Manual, tractor with a rake and a forwarder; Four chipping work organization systems: chipper driven inside orchard and manually fed by operators, mobile chipper driven inside orchard with pick-up header, mobile chipper fed by means of mechanical crane, chipper mounted on a truck fed by means of mechanical crane, which was working in a fixed position in a border of the plot after wood concentration. Also two bundling organization systems were checked: bundler machine working in a fixed position after wood concentration and working inside the plot driven among the crops. Previous concentration of the materials was the best alternative for their chipping or bundling in the studied conditions. Regression models have been calculated to predict the time of work of machinery and labor for each alternative. These equations were used to implement logistic planning as the Borvemar model, which defines a logistics network for supplying bio-energy systems.
Resumo em Inglês:Wood is a material of great applicability in construction, with advantageous properties to form various structural systems, such as walls and roof. Most of the roof structural systems follow models that have remained unchanged for a long time. A roof modular system in distinguished materials is proposed: reforested wood (Pine), oriented strand board (OSB) and roof tiles made of recycled long-life packaging material in order to be applied in rural construction. In this alternative, besides the benefit of giving destination packages with long-life thermal comfort, it also highlights the use of reforestated wood being the cultivation of such species that provides incentive for agribusiness. The structural performance of this alternative was evaluated through computer modeling and test results of two modular panels. The analysis is based on the results of vertical displacements, deformations and stresses. A positive correlation between theoretical and experimental values was observed, indicating the model's feasibility for use in roof structures. Therefore, the modular system represents a solution to new architecture conceptions to rural construction, for example, storage construction, cattle handling and poultry, with benefits provided by prefabricated building systems.
Resumo em Inglês:The aerial spraying of plant ripeners on sugar cane (Saccharum officinarum L.) crops causes often the contamination of neighboring areas, which subsidizes formal complaints from the neighbors. These contaminations are due to spraying taking place during inadequate environmental conditions or from technical mistakes during the application. One of the most important causes of this contamination is the susceptibility of the species being cultivated surrounding sugar cane. In order to evaluate the effects of sugar cane plant ripeners trinexapac-ethyl and sulfometuron-methyl on peanuts, cotton, potato, coffee, citrus, beans, sunflower, cassava, rubber, soybean, and grapes, eleven experiments - one for each species - were carried out from May 2009 to Jan. 2010. The field experiment was set according to a completely random design with five treatments and four replications. Just before or during flowering, a single treatment of trinexapac-ethyl at 100 or 200 g ha-1 and sulfometuron-methyl at 7.5 or 15 g ha-1 was applied to plants. A control treatment (plants not treated) for each species was part of each experiment. Trinexapac, at the doses of 100 and 200 g ha-1, showed selectivity to peanuts, cotton, potato, coffee, citrus, sunflower, cassava, rubber, soybean, and grape. At the lowest dose (100 g ha-1), it was selective for bean. Sulfometuron, at the dose of 7.5 g ha-1, was selective for peanuts and, at the two studied doses (7.5 and 15 g ha-1), it was selective for coffee, citrus, cassava, and rubber.
Resumo em Inglês:Many researchers have shown the potential of Synthetic Aperture Radar (SAR) images for agricultural applications, particularly for monitoring regions with limitations in terms of acquiring cloud free optical images. Recently, Brazil and Germany began a feasibility study on the construction of an orbital L-band SAR sensor referred to as MAPSAR (Multi-Application Purpose SAR). This sensor provides L-band images in three spatial resolutions and polarimetric, interferometric and stereoscopic capabilities. Thus, studies are needed to evaluate the potential of future MAPSAR images. The objective of this study was to evaluate multipolarized MAPSAR images simulated by the airborne SAR-R99B sensor to distinguish coffee, cotton and pasture fields in Brazil. Discrimination among crops was evaluated through graphical and cluster analysis of mean backscatter values, considering single, dual and triple polarizations. Planting row direction of coffee influenced the backscatter and was divided into two classes: parallel and perpendicular to the sensor look direction. Single polarizations had poor ability to discriminate the crops. The overall accuracies were less than 59 %, but the understanding of the microwave interaction with the crops could be explored. Combinations of two polarizations could differentiate various fields of crops, highlighting the combination VV-HV that reached 78 % overall accuracy. The use of three polarizations resulted in 85.4 % overall accuracy, indicating that the classes pasture and parallel coffee were fully discriminated from the other classes. These results confirmed the potential of multipolarized MAPSAR images to distinguish the studied crops and showed considerable improvement in the accuracy of the results when the number of polarizations was increased.
Resumo em Inglês:The increasing demand for raw material for multiple uses of forest products and by-products has attracted the interest for fast growing species, such as the Australian Cedar (Toona ciliata), which presents high productive and economic potential. This study aimed at estimating genotypic parameters and values for the species through the use of the BLUP procedure, at individual level, with repeated measures, by means of the conventional evaluation procedures and the introduction of innovative digitalization of the measurements by digital camera with the images provided by the Imagej software system. The main objective is to subsidize the beginning of a breeding program for the species. The assays were carried out in private properties, in plantations located in the state of Rio de Janeiro, Brazil. The results generated by three evaluations revealed that the image digital analysis is adequate to quantify characteristics of Toona ciliata. It is also an effective and accurate alternative to minimize the costs of data collection in evaluations with the species. There was high accuracy for the characters plant height, diameter at breast height and cylindrical volume. Out of the 90 genotypes evaluated, 38 expressed genotypic values predicted for the diameter at breast height higher than the general average of this character, 33 for the cylindrical volume and 49 for height, allowing gains of up to 24.9 % in average for cylindrical volume. The method of mixed models (REML/BLUP) applied via the SELEGEN software system, using the BLUP procedure at individual level and repeated measures in each individual proved to be adequate to estimate the genetic parameters and predict genotypic values in situations of unbalanced data. Therefore, it is very useful and practical for Toona ciliata genetic breeding programs.
Resumo em Inglês:Soils of a large tropical area with differentiated landscapes cannot be treated uniformly for ecological applications. We intend to develop a framework based on physiography that can be used in regional applications. The study region occupies more than 1.1 million km² and is located at the junction of the savanna region of Central Brazil and the Amazon forest. It includes a portion of the high sedimentary Central Brazil plateau and large areas of mostly peneplained crystalline shield on the border of the wide inner-Amazon low sedimentary plain. A first broad subdivision was made into landscape regions followed by a more detailed subdivision into soil regions. Mapping information was extracted from soil survey maps at scales of 1:250000-1:500000. Soil units were integrated within a homogenized legend using a set of selected attributes such as taxonomic term, the texture of the B horizon and the associated vegetation. For each region, a detailed inventory of the soil units with their area distribution was elaborated. Ten landscape regions and twenty-four soil regions were recognized and delineated. Soil cover of a region is normally characterized by a cluster composed of many soil units. Soil diversity is comparable in the landscape and the soil regions. Composition of the soil cover is quantitatively expressed in terms of area extension of the soil units. Such geographic divisions characterized by grouping soil units and their spatial estimates must be used for regional ecological applications.
Resumo em Inglês:Spodoptera frugiperda (Smith, 1797) (Lepidoptera: Noctuidae) is considered to be the main pest of maize crops in Brazil. Entomopathogenic nematodes (EPN) may be used to control this pest and exhibit different, unique abilities to search for their hosts. The movement of EPN in relation to S. frugiperda was evaluated. To test for horizontal movement, a styrofoam enclosure filled with sand was divided into segments, nematodes were placed at the entrance to the enclosure and a larva was placed at the end of each division. The same approach was used to evaluate vertical movement; however, PVC pipes were used in this case. In general, the mortality was inversely proportional to the initial distance between host and nematodes. In the vertical displacement test, both nematodes were able to kill the larvae up to a distance of 25 cm. Therefore, the infective juveniles of H. amazonensis and S. arenarium can search out, infect and kill larvae of S. frugiperda at distances of up to 60 cm and 25 cm of horizontal and vertical displacement, respectively.