Journal of Aerospace Technology and Management (JATM) is an open access journal, devoted to research and management on different aspects of aerospace technologies. The content has been published continuously since January 2018. Its abbreviated title is J. Aerosp. Technol. Manag. which should be used in bibliographies, footnotes and bibliographical references and strips.
All content of the journal, except where identified, is licensed under a Creative Commons attribution-type BY.
Journal of Aerospace Technology and Management is supported by:
EDITORS IN CHIEF
Associated Editors (Section Editors)
Standardization, copyediting and profreading
Linceu Editorial LTDA
Scope and Policy
The Journal of Aerospace Technology and Management (JATM) is an open access journal devoted to research and management on different aspects of aerospace technologies. For all accepted manuscripts, the correspondence author will be asked to contribute with the Article Processing Charge. The value is fixed per article, independent of its length and is R$ 800,00 (in Brazilian reais) or U$300,00 (in American dollars).
JATM accepts manuscripts already published in preprint, considered reliable by the editorial committee, and must be informed in the Open Science Compliance Form that must be submitted as a supplementary file to the Manuscript.
From October of 2021 and on, all the submissions will not blind the authors names and the process may follow open review allowing the reviewers to interact directly with authors.
Topics of interest:
Corrections and retractions policy:
Review articles: These should cover subjects that are relevant to the scope of the journal. Authors should bear in mind that they are expected to have expertise in the reviewed field. The article should not present more than 40,000 characters with space.
Original papers: These articles should report results of the scientific research. The article should not present more than 40,000 characters with space, as succinct papers are favored in terms of impact as well as in readability
Communications: They should report previous results of ongoing research and should not content more than 30,000 characters with space.
Thematic section: JATM, since 2022, publish a regular thematic section exploring issues of importance to developing a specific subject.
The theme is defined by the Editorial Committee, which invites 2 Guest Section editors to oversee the evaluation of the manuscripts.
Contributions to the thematic section are subject to peer review and benefit from comments and editorial guidance from the guest editors. Each article should not present more than 40,000 characters with space.
Papers already presented at conferences will be accepted if they were not published in complete form in the Annals of the conference or if they are extended with additional results or new findings. These articles will be evaluated as the others.
The use of copyrighted material, such as, figures, tables, drawings, etc. from other sources (including the Internet) needs a written permission. Authors are the solely responsible to get the required permissions, and to present them at the time of the submission.
Articles from guest authors will be published after approval of one specialist Section Editor.
The JATM does not publish translated articles from other journals.
JATM is committed to the open science initiatives, offering to the reviewers, the opening of their identities.
The manuscripts will be received by the assistant editors who initially will verify the similarity of the content (plagiarism) using the iThenticate system. For manuscripts with no or low content of similarity, a Section Editor (SE) will be assigned. The SE will appoint 2 to 4 external evaluators (ad hoc referees) in double-blind peer review mode, ensuring complete anonymity. After receiving the evaluations, the SE must give a decision about the manuscript addressing the evaluator’s recommendations. The SE can accept the manuscript in the form it was submitted; can reject it or request revisions. The manuscript that requires revision will be sent to the author, who is supposed to submit a new version and a letter to the Editor, where each recommendation of the evaluators should be commented. The additional paragraphs should be highlighted. In the case the author does not agree with the evaluator’s suggestions, it is necessary to explain the reasons. After verifying the adherence to the recommendations in the new version, the SE should give the final decision or, exceptionally, send to another evaluation round if the changes have not been sufficiently addressed. The entire process is available to the authors at any moment. In the cases the authors do not agree with the final decision, it is allowed to appeal on the decision by sending an email to the Executive Editor, who will review the process and ask for reconsideration to the Editors in Chief, if justified.
Form and preparation of manuscripts
The manuscript should be digitalized using a Microsoft® Office document (.docx), 12-pt. Times New Roman, double-spaced throughout, justified paragraphs and leaving one space after a period. Do not try to fit the manuscript in the final template. Top level headings should be centered on the page, using upper and lower case. Second level headings should be flush left, italicized, using upper and lower case, without numbering. For those authors that prefer to edit in LaTex, submit a PDF file instead. Authors are also strongly advised to use abbreviations sparingly whenever possible to improve the readability of the manuscript. Do not include a list of symbols, nomenclature and/or abbreviations. Instead, define them at the first time they appear in text. Accepted manuscripts can be edited by the editorial office to comply with the format of the journal, remove redundancies, and improve clarity and understanding without altering meaning. The edited text will be presented to authors for approval.
Title and names of authors: The title should not contain abbreviations. All authors should be identified with full name, email, institution to which they are related, city, state, and country. One of them should be indicated as the author for correspondence and his/her full postal address is required.
Abstract: They are limited to 200 words and structured into objectives, methods, results, and conclusions. Citations or abbreviations (except internationally recognized abbreviations, such as weights, measures, and physical or chemical ones) are not permitted.
Keywords: It is highly recommended to choose the keywords accurately, selecting three to six items based on NASA Thesaurus volume 2 – Access Vocabulary.
Introduction: It should set the purpose of the study, providing a brief summary (not a review) of previous relevant studies, and stating the new advances in the current investigation. The introduction should not include data or conclusions from the work being reported. A final sentence summarizing the novel finding to be presented is permissible.
Methodology: The authors are free to use any structure in this section to fit the objectives of the study. They could also rename it (e.g. Numerical analysis, Case study, and so on), and in some cases it may be advisable to omit it. Clear and sufficient information to permit the study to be repeated by others should be briefly given. Standard techniques need only to be referenced. Previously published methods may be briefly described following the reference.
Results: This section should be a concise account of the new information that was discovered, with the least personal judgment. Do not repeat in text all the data in the tables and illustrations, but briefly describe what these data comprise.
Discussion: The discussion should include the significance of the new information and relevance of the new findings in light of existing knowledge. Only unavoidable citations should be included. Citations to review articles are not encouraged in this section. In some cases, this section may be advisable to merge with the previous section (“Results and Discussion”).
Acknowledgements: This section should be dedicated for those who did not participate directly in achieving the results presented in the paper. Also, references to personal or private communication placed in running text should be acknowledged in this section.
Author's contribution: JATM endorses the CRediT taxonomy (Contributor Roles Taxonomy) and asks the authors to provide detailed information about individual contributions to the work. The submitting author is responsible for ensuring that contributions of all authors are correct and it is expected that all authors will have reviewed, discussed and agreed to their individual contributions as shared by the submitting author.
The authors’ contribution statement will be published and should accurately reflect only the contributions selected from the following roles:
Conceptualization [Ideas; formulation or evolution of overarching research goals and aims]; Data Curation [Management activities to annotate (produce metadata), scrub data and maintain research data (including software code, where it is necessary for interpreting the data itself) for initial use and later reuse]; Formal Analysis [Application of statistical, mathematical, computational, or other formal techniques to analyze or synthesize study data]; Funding Acquisition [Acquisition of the financial support for the project leading to this publication]; Investigation [Conducting a research and investigation process, specifically performing the experiments, or data/evidence collection]; Methodology [Development or design of methodology; creation of models]; Project Administration [Management and coordination responsibility for the research activity planning and execution]; Resources [Provision of study materials, reagents, materials, patients, laboratory samples, animals, instrumentation, computing resources, or other analysis tools]; Software [Programming, software development; designing computer programs; implementation of the computer code and supporting algorithms; testing of existing code components]; Supervision [Oversight and leadership responsibility for the research activity planning and execution, including mentorship external to the core team]; Validation [Verification, whether as a part of the activity or separate, of the overall replication/reproducibility of results/experiments and other research outputs]; Visualization [Preparation, creation and/or presentation of the published work, specifically visualization/data presentation]; Writing – Original Draft Preparation [Creation and/or presentation of the published work, specifically writing the initial draft (including substantive translation)]; Writing – Review & Editing [Preparation, creation and/or presentation of the published work by those from the original research group, specifically critical review, commentary or revision – including pre- or post-publication stages]
An example of an Authors’ Contribution statement using CRediT: Conceptualization: Omar A; Methodology: Rahma R; Computational Works: Rahma R and Emmed A; Analysis: Omar A; Rahma R and Emmed A; Writing – Original Draft: Rahma R and Emmed A; Writing – Review and Editing: Omar A; Supervision: Omar A.
Regardless of the contribution and the registration system, all authors are equally responsible for the article content.
Funding: The financial support received for the elaboration of the manuscript must be declared in this item. The funding agency should be written out in full, followed by the Funder registry DOI and the grant number. Multiple grant numbers of same agency or multiple agencies should also be informed. If the research is not funded by a specific project grant include this information: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
References: Acceptable references include journal articles, numbered papers, books, and submitted articles, if the journal is identified. References must be restricted to directly relevant papers or abstracts that have been accepted for publication. Self-citation should be limited to a minimum. Authors are responsible for the accuracy and completeness of their references.
Style and format citation
The references list is unnumbered and appears in alphabetical order by author and year of publication, with multiple studies by the same author listed in chronological order. It is highly recommended that each reference contains the digital object identifier number (doi). References retrieved from the Internet should be cited by the last name of the author(s) and the year of publication, or n.d., if not available, followed by the date of access. Some examples are as the following ones:
Journals: List authors in the order in which they appear in the original text, separated by colon. The year of publication follows the authors list in parentheses, followed by article and journal title, as well as volume or issue information. The page range for the article is preceded by colon. Journal titles are generally abbreviated according to the list of title word abbreviations maintained by the ISSN International Centre.
Article with one author: Costa S (1996) Dassault adaptative cells. Ind Robot Int J 23(1):34-40. doi: 10.1108/01439919610108837
Books: The basic format is: Author(s) (Date) Title. Edition. Place of publication: Publisher. Extent. Notes. Extent can include information about pagination or number of volumes and is considered optional. Notes can include information of interest to the reader, such as language of publication other than English; such notes are optional. These notes also provide information about location, such as a URL for online works.
Dissertations and Theses: Oliveira ALL (2010) Contribuição metodológica para investigar fenômenos de superfície em tribossistemas protéticos articulares de quadril (PhD thesis). São Paulo: Universidade de São Paulo. In portuguese.
Research data: References to data follow the same general principles of journal references and should include: Authors; Year; Dataset title; Data repository or archive; Version (if any); Persistent identifier (e.g. DOI): Haleghian Salman, 2020, Synthetic-Aperture Radar (SAR) based Ice types/Ice edge dataset for deep learning analysis, DataverseNO, V, https://doi.org/10.18710/QAYI4O
Websites and other online formats: References to websites and other online formats follow the same general principles as for printed references, with the addition of a date of update/revision (if available) along with an access date and a URL: Title of the homepage. Date of publication. Edition. Place of publication: publisher; [date updated; date accessed]. Notes.
Forthcoming or unpublished material: Farley T, Galves A, Dickinson LM, Perez MJ. Forthcoming 2005 Jul. Stress, coping, and health: a comparison of Mexican immigrants, Mexican-Americans, and non-Hispanic whites. J Immigr Health.
Paper or poster presented at meeting: Unpublished presentations are cited as follows: Antani S, Long LR, Thoma GR, Lee DJ (2003) Anatomical shape representation in spine x-ray images. Paper presented at: VIIP 2003. Proceedings of the 3rd IASTED International Conference on Visualization, Imaging and Image Processing; Benalmadena, Spain.
Tables: Tables should be numbered in order of appearance in the text, using Arabic numerals. Each table should have a title and an explanatory legend, if necessary. All tables must be referenced and mentioned in the text as “Table” and succinctly described in the text. Under no circumstances should a table repeat data that are presented in an illustration. Statistical measures of variation (i.e. standard deviation or standard error) should be identified, and decimal places in tabular data should be restricted to those with mathematical and statistical significance.
Figures: All illustrations, line graphs, charts, schemes, photographs, and graphs should be referred as “Figure” and submitted with good definition (JPEG files of at least 300 dpi resolution and 12 cm wide); otherwise, authors will be requested to withdrawn from the text. Number the figures consecutively using Arabic numerals in order of appearance. References should be made in the text to each figure using the abbreviated form “Fig.”, except if they are mentioned in the beginning of the sentences. Captions should be descriptive and allow the examination of the figures, without reference to text. You are welcome to paste images into Microsoft® Word documents, but you must send the images as separate JPEG files as well, when required.
Equations: Type them on individual lines, in 12-pt. Times New Roman, with symbols in italic, and identifying them by Arabic numerals enclosed in parenthesis. References should be made in the text to each equation using the abbreviated form “Eq.”, except in the beginning of the sentences, where the form “Equation” should be used.
Send of the manuscripts
The manuscripts of the articles must cite all other content underlying the text in order to facilitate and promote understanding of the research, its peer review, reproducibility, reuse, preservation and visibility.
Therefore, before or in parallel with the submission of manuscripts, authors must make available the underlying content in a data repository or in more than one in the case of different types of files and content. Authors can choose to keep these files closed until the article is approved and published. They may also request to keep them closed after publication for reasons that the journal may or may not accept.
If data sharing is not applicable to the article as no datasets were generated or analyzed during the current study, it must be stated.
Research data includes, but is not limited to: raw data, processed data, software, algorithms, protocols, methods, materials. Visit re3data.org to help identify registered and certified data repositories relevant to subject area.
The author responsible for the submission must inform whether the manuscript cites the data, software codes and other materials underlying the articles. If so, the respective URLs must be informed; otherwise, the author must justify himself. For this, SciELO recommends the use of the Open Science Compliance Form that must be submitted as a supplementary file to the manuscript and accessible to peer reviewers;
The initial manuscript evaluations and later that of the associate editors and referees are requested to check the availability of data, software codes and other materials following the journal's evaluation guide and form.
The manuscript should be submitted electronically only in English, at https://mc04.manuscriptcentral.com/jatm-scielo.
If there is any conflict of interest regarding the evaluation of the manuscript, the author must send a declaration indicating the reasons, so that the review process occurs fairly. The submissions are received continuously and processed as soon as possible so that they stay updated as to the results informed in the paper.
It is extremely important that all data about the authors are entered correctly at the time of submission. The data refer to the full name; affiliation with three instances (e.g.university/college/department); city, state and country. It is mandatory to adopt and inform the ORCID number of each author and to indicate the corresponding author with full postal address. The names of institutions must be in the native language (Portuguese; French; Germany etc.), except for those names that are not in Latin language (Russian; Chinese etc.), which should be translated into English.
Authors should provide a list of names and institutional e-mail addresses of four potential referees. The Journal retains the right to decide whether or not the suggested names are going to be used.
At the time of submission, the submitting author assumes that all other authors actively participated in the research and/or performed the final review and approval of the article.
After the approval of manuscript, the correspondence author will be contacted with instructions for Article Processing Charge (APC) contribution.
Submission Preparation Checklist
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
JATM is committed to the observance of best practices on ethics in the management of manuscripts, which involves editors, reviewers and authors and adopts the “SciELO Guidelines on Best Practices for Strengthening Ethics in Scientific Publication” and the “Principles of Transparency and Good Practice in Academic Publications” recommended by the Committee on Publication Ethics (COPE), the Directory of Open Access Journals (DOAJ), and the Open Access Scholarly Publishers Association (OASPA).