SciELO - Scientific Electronic Library Online

 
vol.45 número8Propriedades mecânicas da madeira resinada de Pinus elliottiiArmazenamento a frio e aplicação de reguladores vegetais no enraizamento de estacas radiculares e caulinares de framboeseira índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Ciência Rural

versão impressa ISSN 0103-8478versão On-line ISSN 1678-4596

Resumo

DALRI, Alexandre Barcellos et al. Technique characterization and hydraulic performance of four self-compensating drippers used in Brazil. Cienc. Rural [online]. 2015, vol.45, n.8, pp.1439-1444. ISSN 1678-4596.  https://doi.org/10.1590/0103-8478cr20140860.

This study aimed to characterize and evaluate the performance of four models self-compensating drippers commonly used in drip irrigation systems in Brazil. To perform the study it was taking a sample of 25 emitters of each model. Evaluating their tubes (b) coefficient of manufacturing variation (c) wall thickness, (d) characteristic equation of the dripper, (e) internal diameter of the pipe, (f) spacing between emitters, (g) resistance water pressure at ambient temperature and to 40°C and (h) the tensile strength of the pipe with tension of 160 N and 180 N. The analysis showed variation coefficient of less than 0.045 for all manufacturing drippers (0.07 is maximum according to ABNT NBR ISO 9261). The exponents x of the equation pressure versus discharge ranged from 0.0082 to 0.0691 classifying them as self-compensating. From the results obtained it is clear that the tested products which are used in Brazil and used by irrigators had a satisfactory hydraulic performance in accordance with the standard.

Palavras-chave : evaluation; emitter; drip irrigation..

        · resumo em Português     · texto em Português     · Português ( pdf )