SciELO - Scientific Electronic Library Online

 
vol.21 número3Poliolefinas reforçadas com fibras vegetais curtas: sisal × curauá índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428

Resumo

COSTA, Anahi P.; BOTELHO, Edson C.  e  PARDINI, Luiz C.. Effect of environmental degradation on shear properties of PPS /carbon fiber composites. Polímeros [online]. 2011, vol.21, n.3, pp.161-167.  Epub 17-Jun-2011. ISSN 0104-1428.  https://doi.org/10.1590/S0104-14282011005000042.

Advanced thermoplastic composites are an alternative to thermoset composites in many aeronautical applications owing to their superior properties. Among the thermoplastic matrix, PPS (poly phenylene sulfide) stands out due to its structural characteristics. The objective of this study is to evaluate the influence of environmental conditioning on the shear behavior of PPS / carbon fiber composites. Samples of this material have been conditioned in saline water solution, in hygrothermal conditioning and under UV radiation. After conditionings the specimens were evaluated by interlaminar shear strength (ILSS) and Iosipescu shear test methods. The environmental conditioning reduced the interlaminar shear stress (ILSS) of conditioned composites in comparison with non-conditioned composites tested with the same method (58.4 ± 1.9 MPa). The ILSS decreased by ca. 14 and 3%, respectively, after hygrothermal conditioning and saline water solution. Moreover, the values of interlaminar shear stress under UV radiation decreased by 2, 11 and 9% after exposure times of 300, 600 and 900 hours, respectively. The non-conditioned composites tested with the Iosipescu method (109.2 ± 0.4 MPa ) also had ILSS decreasing with environmental conditioning: the values decreased 6% after hygrothermal conditioning and 12% after saline water solution. The UV radiation exposure led to a decrease of 6, 10 and 14% following exposures during 300, 600 and 900 hours, respectively.

Palavras-chave : Poly phenylene sulfide (PPS); carbon fiber; shear properties; thermoplastic composite; environmental conditioning.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons