SciELO - Scientific Electronic Library Online

 
vol.22 número5Investigação da influência do processamento na dinâmica molecular de nanocompósitos de policarbonato e argila organofílica obtidos via intercalação por fusãoSíntese de acetato de celulose a partir da palha de feijão utilizando N-bromossuccinimida (NBS) como catalisador índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428

Resumo

SANTOS, Renata P. dos et al. FT-IR characterization of EPDM rubber surface treated by microwave plasma. Polímeros [online]. 2012, vol.22, n.5, pp.440-446.  Epub 18-Out-2012. ISSN 0104-1428.  http://dx.doi.org/10.1590/S0104-14282012005000065.

The surface of a vulcanized ethylene propylene diene monomer (EPDM) rubber was modified by microwave plasma in Ar, Ar/O2, N2/O2 and N2/H2 in order to improve the adhesion properties. Surface modification was characterized by FT-IR/UATR, because this technique showed smaller interference of ingredients of EPDM formulation in comparison with other techniques used (ATR KRS-5 and Ge). Oxygenated groups were introduced in the EPDM surface after treatment, even in treatments without oxygen. Theses groups were formed when the activated surface was exposed to the atmosphere. In treatments with nitrogen, oxygenated and possible nitrogenated groups were identified by FT-IR. Reduction in the contact angle, increase in the work of adhesion and increase in the peel strength (EPDM × Polyurethane) were observed after treatment with Ar and N2/H2, resulting in improved adhesion properties of the modified surface.

Palavras-chave : EPDM; plasma; surface characterization; FT-IR.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons