SciELO - Scientific Electronic Library Online

 
vol.4 número3Estratégias, organização e gestão de empresas em mercados globalizados: a experiência recente do Brasil índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Gestão & Produção

versão impressa ISSN 0104-530X

Resumo

NAVEIRO, Ricardo M.  e  O'GRADY, Peter. Dicast: an intelligent system to assist the design of casting parts. Gest. Prod. [online]. 1997, vol.4, n.3, pp.251-264. ISSN 0104-530X.  https://doi.org/10.1590/S0104-530X1997000300001.

This paper addresses the issue of integrating design and manufacturing by describing a Concurrent Engineering system called Dicast that has been developed to assist designers with the detailed design of castings. Design is viewed as a constraint driven activity where designers negotiate solutions to the design based on dynamically evaluating constraints. In this way, the design process can be modeled as variables that represent design parameters interconnected with constraints. Advice is given to the designer when constraints are violated.

Palavras-chave : concurrent engineering; design for manufacturing; constraint logic programming; design support systems.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons