SciELO - Scientific Electronic Library Online

vol.18 issue1Analysis of weld pool oscillation in P-GMAW by Means of Shadowgraphy Image ProcessingDelta-ferrite development in weld and HAZ produced by pulsed plasma arc welding in a supermartensitic stainless steel author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand




Related links


Soldagem & Inspeção

Print version ISSN 0104-9224


MELO, Raphael. H. F.; SANTOS, Marco Antonio dos  and  MACIEL, Theophilo Moura. Evaluation of residual stress field by x-ray diffraction using the sen2ψ method on E308-L stainless steel weld overlays. Soldag. insp. [online]. 2013, vol.18, n.1, pp.50-56. ISSN 0104-9224.

The application of metal coatings by welding of steels and alloys resistant to corrosion is an alternative quite reasonable economically facing the manufacturing of solid components in these alloys. However there is a lack of information about the mechanical / metallurgical changes caused by thermal cycles of welding due to the application of these coatings, especially on the influence on the level of residual stresses, that it is essential to understand the phenomenon of stress-assisted corrosion. The aim of this study was to evaluate the level of the superficial residual stresses in coatings of AWS E308L T-1 stainless steel applied by the FCAW process on steel plates of ASTM A36. The measurements of residual stresses were performed by a portable X - ray diffractometer on the surface of the coatings and the main results obtained were that the nature of residual stresses on the surface of the coatings always showed compressive and no linearity of the magnitude of the residual stresses as a function of the welding energy.

Keywords : Welding; stainless steel; residual stress; x-ray diffraction.

        · abstract in Portuguese     · text in Portuguese     · Portuguese ( pdf )


Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License