SciELO - Scientific Electronic Library Online

 
vol.11 número11Minimum mesh design criteria for blast wave development and structural response - MMALE methodSound transmission across orthotropic cylindrical shells using third-order shear deformation theory índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Latin American Journal of Solids and Structures

versão On-line ISSN 1679-7825

Resumo

BOUKHALFA, Abdelkrim. Dynamic analysis of a spinning functionally graded material shaft by the p - version of the finite element method. Lat. Am. j. solids struct. [online]. 2014, vol.11, n.11, pp.2018-2038. ISSN 1679-7825.  https://doi.org/10.1590/S1679-78252014001100007.

This paper is concerned with the dynamic behavior of the spinning Functionally Graded Material (FGM) shaft on rigid bearings. A p- version, hierarchical finite element is employed to define the model. A theoretical study allows the establishment of the kinetic energy and the strain energy of the shaft, necessary to the result of the equations of motion. In this model the transverse shear deformation, rotary inertia and gyroscopic effects have been incorporated. A hierarchical beam finite element with six degrees of freedom per node is developed and used to model the shaft. A program is elaborate for the calculation of the natural frequencies of a spinning FGM shaft. To verify the present model, the results are compared with those available in the literature. The efficiency and accuracy of the methods employed are discussed.

Palavras-chave : Spinning shaft; Functionally Graded Material; FGM; p- version; hierarchical finite element method; FEM.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons