SciELO - Scientific Electronic Library Online

 
vol.15 número5A New Buffer in Impact Reduction for Aerospace ApplicationsWave transmission across laminated composite plate in the subsonic flow Investigating Two-variable Refined Plate Theory índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Latin American Journal of Solids and Structures

versão impressa ISSN 1679-7817versão On-line ISSN 1679-7825

Resumo

SANCHEZ, J.A.G.  e  CODA, H.B.. The Search for the Centre of Resistance of a Tooth Using a Finite Element Model and the Continuum Mechanics. Lat. Am. j. solids struct. [online]. 2018, vol.15, n.5, e41.  Epub 14-Jun-2018. ISSN 1679-7825.  https://doi.org/10.1590/1679-78254373.

In orthodontics, the CR is defined as the ideal point for the positioning of the bracket. This paper presents numerical analyses of a premolar tooth, which aim at searching the centre of resistance (CR) by applying several external torques. We built the geometry of the tooth by making a tomographic renderisation with the software MIMICS. The numerical simulation is performed in the software ANSYS WORKBENCH (ANSYS® Academic Research). The domain of the tooth is discretized using three-dimensional solid elements. The search for the position of CR is made through a heuristic analysis by applying external torques to the model and, afterwards, by seeking the intersection of the neutral planes (where there is no translation). The numerical results showed that the CR is not a point, but rather a region that strongly depends on the relative stiffness between the tooth and the Periodontium (PDL).

Palavras-chave : Centre of resistance; orthodontia; FE; biomechanics.

        · texto em Inglês     · Inglês ( pdf )