SciELO - Scientific Electronic Library Online

vol.13 issue1Aids and cross-infection control in the dental practice: patients’ perception and attitudesCurvature modification of simulated root canals after use of rotary instruments author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand



  • Article in xml format
  • How to cite this article
  • SciELO Analytics
  • Curriculum ScienTI
  • Automatic translation


Related links


Revista de Odontologia da Universidade de São Paulo

Print version ISSN 0103-0663

Rev Odontol Univ São Paulo vol.13 n.1 São Paulo Jan./Mar. 1999 



Influence of different kinds of rosins and hydrogenated resins on the setting time of Grossman cements


Influência de diferentes tipos de breus e resinas hidrogenadas sobre o tempo de endurecimento dos cimentos do tipo Grossman


Manoel Damião SOUSA NETO*
Luis Fernando GUIMARÃES**
Danilo Mathias Zanello GUERISOLI***
Paulo César SAQUY****
Jesus Djalma PÉCORA*****



SOUSA NETO, M. D. GUIMARÃES, L. F.; GUERISOLI, D. M. Z.; SAQUY, P. C.; PÉCORA, J. D. Influence of different kinds of rosins and hydrogenated resins on the setting time of Grossman cements. Rev Odontol Univ São Paulo, v. 13, n. 1, p. 83-87, jan./mar. 1999.

In this study, the effect on the setting time by the addition of different kinds of rosin and hydrogenated resin on the Grossman cement powder was evaluated. The experiments were carried out following the American Dental Association’s specification number 57 for root canal sealers. For this analysis, different Grossman cement powders were prepared using different rosins (X, WW and WG) and hydrogenated resins (Staybelite and Staybelite ester 10). The study of the physicochemical properties of the Grossman cements obtained the different kinds of rosins and hydrogenated resins interference on the cement’s setting time. The hydrogenated resin, having a higher pH, increased the setting time of the cement when compared to the X, WW and WG rosins.

UNITERMS: Dental cements; Time factors; Dental materials; Dental restoration; Permanent.




The zinc oxide based cements have been used in Dentistry over the last six decades. These cements are nothing but formulas adapted to the circumstances and necessities of each time13.

The root canal sealers proposed by GROSSMAN6,7,8,9,10,11 (1962; 1974; 1936; 1958; 1976; 1946) are zinc-oxide eugenol based.

In 1936 GROSSMAN8 developed, a root canal sealer that had the following composition: powder: silver, hydrogenated resin and zinc oxide; liquid: eugenol and 4% zinc chloride solution.

In 1958, observing that the silver produced sulfides that darkened the teeth, GROSSMAN9 eliminated it from the powder composition. Regarding the liquid composition, he substituted the zinc chloride for almond oil. The addition of vegetal oil had the purpose of retarding the setting time, giving the dentist more time to work on the root canal.

Still researching, GROSSMAN6 (1962) included anhydrous sodium tetraborate to the powder of his cement, with the purpose to retard the setting time. In 1974, this author concluded that the addition of almond oil to the eugenol was not necessary, since the anhydrous sodium tetraborate was able to keep a satisfying working time. Thus, alterations were made in the powder composition and the liquid, and the final formula is shown below:

Zinc oxide 42%
Rosin or hydrogenated resin 27%
Bismuth subcarbonate 15%
Barium sulfate 15%
Anhydrous sodium tetraborate 1%

According to the requisites that a root canal sealing material must have, the properties and qualities can be divided into physicochemical, antimicrobian and biological.

The investigation of these properties became standardized since the publication of the specification number 57 of the AMERICAN DENTAL ASSOCIATION1 (1983), avoiding the problems caused by the lack of standardization of the realized tests3, making the research results reproducible and also to enable accurate comparisons between the different materials and research results.

The different commercial brands of Grossman cements employ in their compositions hydrogenated resin or rosin, not having uniformity in the formula.

This way, it is necessary to study the influence of different kinds of rosins and hydrogenated resins on the setting time of the Grossman cements, to inform which product shows the best physicochemical characteristics.



The setting time determination of the cements followed the specification number 57 of the A.D.A.

The cements tested were obtained from the formula proposed by GROSSMAN10 (1976), the only difference between them being the kind of rosin or hydrogenated resin (Table 1)


TABLE 1 Tested rosins and hydrogenated resins, their commercial brands and the manufacturers

a16t1.gif (10659 bytes)


The powder/liquid relations for the modified cements and spatulation times were obtained as described by SOUSA NETO15 (1997) and are shown in Table 2.


TABLE 2 – Powder/liquid relations and spatulation times in seconds for the modified cements

a16t2.gif (10456 bytes)


In order to perform this test, rings of stainless steel with an internal diameter of 10 mm and wall thickness of 2 mm were manufactured. The rings were fixed with wax on their external surface on a glass plate (1 x 25 x 75 mm).

After this the cement was manipulated, following the proportion expressed in Table 2 and placed inside the metallic ring, until it was completely filled.

After 120 ± 10 seconds from the beginning of the spatulation, the whole apparatus was placed over a grate inside a hermetically sealed plastic container. The device was kept at 37°C and 95% relative air humidity.

After 150 ± 10 seconds from the beginning of the spatulation, a 100 g, 2 mm active point Gillmore needle was positioned vertically on the surface of the material.

This test was repeated each 60 seconds until the needle stopped to mark the surface of the cement. The setting time was considered as the amount of time passed from the beginning of the spatulation until the Gilmore needle did not leave any visible mark on the cement’s surface.

The setting time was considered as the average of 5 measures.



The data obtained for the setting times, shown in Table 3, were submitted to a statistical analysis. The sample parameter study pointed to a non-parametric distribution. The Kruskal-Wallis test indicated a H0=0,03% for a 1% significance.


TABLE 3 - Flow test of the studied cements (data in millimeters)

a16t3.gif (7903 bytes)


Once determined by the Kruskal-Wallis test that significant statistical differences between the cements existed, the sample average comparison was made, and the results are presented in Table 4.


TABLE 4 - Setting time: Comparison between the sample average of the tested cements.

a16t4.gif (9917 bytes)
* Significant to the level of 0.01 = 4.6068; ns = non significant


The setting times of the cements obtained from hydrogenated resins and different kinds of rosin are statistically different between them.

SOUSA NETO15 (1997) analyzed the pH and conductivity of different kinds of rosins and hydrogenated resins to verify their relation to the different physicochemical properties, and these data are shown on Table 5.


TABLE 5 - pH and conductivity values of different kinds of rosin and hydrogenated resins versus time
a16t5.gif (9670 bytes)


Conductivity is a property that indicates the amount of ions present in a solution. The higher the value, the higher the amount of ions in the medium.

When different kinds of rosins were compared, we observed that the X kind presented low conductivity. This characteristic can be justified by the purification method to which this rosin is submitted during its manufacturing process.

The X kind rosin has an uniform light yellow color, different from the WG and WW types, which have a dark yellow color and differences in pigmentation, indicating the presence of impurities (inorganic ions).

The WG rosin has a high conductivity value, indicating high quantities of inorganic ions in its composition.

The hydrogenated resins are obtained from the rosin hydrogenation. This process consists of adding hydrogen to a molecule, through a reaction with gaseous hydrogen, with or without the presence of a catalyst, lowering the number of double links of an unsaturated chain.

The low conductivity found in the hydrogenated resins is due to the hydrogenation process, which removes the impurities from the rosin and saturates the chain. These resins showed the least quantity of inorganic ions among the studied rosins.

The GROSSMAN6,7,9 cement (1962; 1974; 1958) is a zinc-oxide eugenol based cement. Other components are added in order to obtain better physicochemical properties. Thus, the setting reaction is due to the reaction between the zinc and the eugenol.

The setting reaction of the zinc and eugenol is basically an ionic reaction, where the eugenol acts as a proton donator (H+). The phenolic hydrogen in eugenol is substituted by the zinc ions to form a zinc-oxide eugenol chelate5.

The setting mechanism of zinc-oxide eugenol based cements is a result of equimolars mixtures of zinc oxide and eugenol, consisting of zinc-oxide involved in a long crystal matrix of zinc eugenolate chelate. Any excess of eugenol is absorbed either by eugenolate and zinc oxide4.

SAVIOLI14 (1992) clearly showed the effect of rosin on the setting reaction of the zinc oxide based cement, reinforcing Grossman findings. The addition of rosin to the powder acts as an accelerator.

Based on the works of FRAGOLA5 et al. (1979); BRAUER4 (1967); GROSSMAN11 (1982) and SAVIOLI14 (1992) the influence of the pH on the setting reaction can be explained in this manner:

The reaction between zinc and eugenol is of ionic nature.

The pH indicates a higher hydrogenionic concentration (H+). Thus, the higher the quantity of H+, the

a16.gif (3809 bytes)

quicker the reaction (II) that produces zinc in its ionic form (Zn2+).

A higher quantity of Zn2+ makes the reaction (III) quicker, accelerating the setting time. This mechanism explains the absence of hardening in cements that contain hydrogenated resins with the pH around 7 (neutral). In this pH there is no H+ excess able to release Zn2+. GROSSMAN12 (1982) relates that the cements containing hydrogenated resins with pH around 7 in their formulas did not set.

In this experiment, the long time the cements prepared with hydrogenated resin took to set , can be explained by its pH and low conductivity. The pH of the hydrogenated resins is higher than the rosins and their conductivity is lower.

The rosins, due to the concentration of abietic acid, have a low pH — indicating a high concentration of H+ in the medium, accelerating the reaction between zinc oxide and eugenol.

BATCHELOR; WILSON2 (1969) stated that consistency and setting time in the cements are related and both are affected by variables like temperature and humidity. Thus, before the realization of the tests in this study, the powder-liquid ratio was established to achieve the ideal consistency for the cements as stated by GROSSMAN10 (1976).

The setting of the material on the glass surface is not related to the clinical conditions, where temperature and oral humidity will interfere in the process. The amounts of material used under clinical and laboratory conditions are also different. To avoid variations in the results, ADA specifications were used for ambient conditions: 37°C and 95% relative humidity.

In this study, it was observed that different kinds of hydrogenated resins and rosins interfere on the setting time of the cements. The hydrogenated resin has a higher pH than the rosin, increasing the setting time when compared to the more acid rosin kinds X, WW and WG.



1. Different kinds of hydrogenated resin and rosin interfere on setting time

1.1. The more acid the pH of the rosin, the quicker will be the setting reaction.

1.2. The setting time follows a crescent order: WW rosin, WG rosin, X rosin, Staybelite ester 10 resin and Staybelite resin.



SOUSA NETO, M. D. GUIMARÃES, L. F.; GUERISOLI, D. M. Z.; SAQUY, P. C.; PÉCORA, J. D. Influência de diferentes tipos de breus e resinas hidrogenadas sobre o tempo de endurecimento dos cimentos do tipo Grossman. Rev Odontol Univ São Paulo, v. 13, n. 1, p. 83-87, jan./mar. 1999.

No presente estudo, analisou-se o efeito da adição de diferentes tipos de breus e resinas hidrogenadas ao pó do cimento de GROSSMAN sobre o tempo de endurecimento. Os experimentos foram realizados de acordo com a Especificação 57 para materiais obturadores de canais radiculares da American Dental Association (ADA). Para análise, foram aviados pós do cimento de GROSSMAN com diferentes tipos de breu (X, WW e WG) e resinas hidrogenadas (Stabylite e Stabylite éster 10). Os estudos das propriedades físico-químicas dos cimentos tipo GROSSMAN obtidos de diferentes tipos de breus e resinas hidrogenadas interferem no tempo de endurecimento do cimento. A resina hidrogenada, obtida do processo de hidrogenação tem o pH mais alto, provocando um aumento do tempo de endurecimento do cimento em relação aos breus tipo X, WW e WG, que têm pH mais ácido.

UNITERMOS: Cimentos dentários; Materiais dentários; Restauração dentária permanente; Fatores de tempo.




1. AMERICAN DENTAL ASSOCIATION. Specification N. 57 for Endodontic filling materials. Chicago : ADA, 1983.        [ Links ]

2. BATCHELOR, R. F.; WILSON, A. D. Zinc oxide-eugenol cements. I. The effect of atmosferic conditions on rheological properties. J Dent Res, v. 48, n. 5, p. 883-887, 1969.

3. BRANSTETTER, J.; FRAUNHOFER, J. A. The physical properties and sealing action of endodontic sealer cements: a review of the literature. J Endod, v. 8, n. 5, p.312-316, 1982.

4. BRAUER, G. M. New developments in zinc oxide-eugenol cement. Ann Dent, v. 26, n. 2, p. 44-50, 1967.        [ Links ]

5. FRAGOLA, A.; PASCAL, S.; ROSENGARTEN, M.; SMITH, A.; BLECHMAN, H. The effect of varying particle size of the components of Grossman’s cement. J Endod, v. 5, n. 11, p. 336-339, 1979.        [ Links ]

6. GROSSMAN, L. I. Algunas observaciones sobre obturación de conductos radiculares. Rev Asoc Odont Argent, v. 50, n. 2, p. 61-66, 1962.        [ Links ]

7. GROSSMAN, L. I. Endodontic practice. 8. ed. Philadelphia: Lea & Febiger, 1974. p. 299-300.        [ Links ]

8. GROSSMAN, L. I. Filling root canals with silver points. Dent Cosmos, v. 78, n. 7, p. 679-687, 1936.        [ Links ]

9. GROSSMAN, L. I. An improved root canal cement. J Am Dent Assoc, v. 56, n. 3, p. 381-385, 1958.        [ Links ]

10. GROSSMAN, L. I. Physical properties of root canal cements. J Endod, v. 2, n. 6, p. 166-175, 1976.        [ Links ]

11. GROSSMAN, L. I. Root canal therapy. 2 ed. Philadelphia: Lea & Febiger, 1946. p. 281.        [ Links ]

12. GROSSMAN, L. I. Setting time of selected essential oils with a standard root canal cement powder. J Endod, v. 8, n. 6, p. 277-279, 1982.         [ Links ]

13. MOLNAR, E. J.; SKINNER, E. W. A study of zinc oxide-rosin cements. I. Some variables which affect the hardening time. J Am Dent Assoc, v. 29, n. 5, p. 744-751, 1942.

14. SAVIOLI, R. N. Estudo da influência de cada componente químico do cimento de Grossman sobre as suas propriedades físicas. Ribeirão Preto, 1992. 123 p. Dissertação (Mestrado) - Faculdade de Odontologia de Ribeirão Preto, Universidade de São Paulo.        [ Links ]

15. SOUSA NETO, M. D. Estudo da influência de diferentes tipos de breus e resinas hidrogenadas sobre as propriedades físico-químicas do cimento obturador dos canais radiculares do tipo Grossman. Ribeirão Preto, 1997. 108 p. Tese (Doutorado) - Faculdade de Odontologia de Ribeirão Preto, Universidade de São Paulo.        [ Links ]


Recebido para publicação em 03/03/98
Aceito para publicação em 25/10/98



* Professor Titular da Universidade de Ribeirão Preto - USP.

** Professor Doutor da Faculdade de Ciências Farmacêuticas de Ribeirão Preto - USP.

*** CD Estagiário de Endodontia, **** Professor Associado e ***** Professor Titular da Faculdade de Odontologia de Ribeirão Preto - USP.

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License