|Towards a methodology for the practical applications of the EIFS (Equivalent Initial Flaw Size) concept|
Mattos, Juliana Diniz; Chaves, Carlos Eduardo
|Three-dimensional compatible finite element stress analysis of spinning two-directional FGM annular plates and disks with load and elastic foundation non-uniformities|
Shariyat, M.; Mohammadjani, R.
|Analysis of laminated composite skew shells using higher order shear deformation theory|
Kumar, Ajay; Chakrabarti, Anupam; Ketkar, Mrunal
|Non-linear FEM analysis of seismic induced pounding between neighbouring multi-storey structures|
Jameel, Mohammed; Islam, A.B.M. Saiful; Hussain, Raja Rizwan; Hasan, Syed Danish; Khaleel, M.
|Shock factor investigation in a 3-D finite element model under shock loading|
Zare, Amin; Janghorban, Maziar
|Material and geometric nonlinear analysis of reinforced concrete frame structures considering the influence of shear strength complementary mechanisms|
Nogueira, C.G.; Venturini, W.S.; Coda, H.B.
|Wave passage effects on the seismic response of a maglev vehicle moving on multi-span guideway|
Yau, J. D.
|Thermal flexural analysis of cross-ply laminated plates using trigonometric shear deformation theory|
Ghugal, Yuwaraj Marotrao; Kulkarni, Sanjay Kantrao
|Stick-slip analysis in vibrating two-layer beams with frictional interface|
Sedighi, Hamid M.; Shirazi, Kourosh H.; Naderan-Tahan, Khosro
|Stacking sequence optimisation of composite panels subjected to slamming impact loads using a genetic algorithm|
Khedmati, Mohammad Reza; Sangtabi, Mohammad Rezai; Fakoori, Mehdi