ABSTRACT Although soybean is one of the most important agricultural commodities in the world, it has been losing genetic diversity in recent decades, due to the intense breeding process and reproduction method. Thus, the objective of this study was to evaluate the agronomic performance and estimate the genetic diversity among inbred lines, and identify promising crossings. A total of 66 soybean genotypes were evaluated, 61 of which were pre-commercial lines, and five commercial cultivars (AS3797, DESAFIO, M7110, M7739, M8210) as controls. The experimental design consisted of randomized blocks with three replicates. The distance matrix between the inbred lines was calculated by Mahalanobis distance and grouping by the unweighted pair group method with arithmetic mean (UPGMA). The maximum distance was 1,776.26 between cultivar M7110 and the G23 inbred line, and the minimum 1.50 between inbred lines G13 and G36, with an average distance of 364.40, demonstrating genetic diversity. The traits that contributed most to genetic divergence were number of days to flowering (66.7%) and physiological maturation (28.55%). Inbred lines G60 (higher grain yield), G51 and G33 (lower physiological maturation) and cultivar M7110 (greater divergence) stood out. Four groups were formed, with G1 having the highest grain yield and fewest days to flowering and physiological maturation. The indicated crossings are between G60, G57, CD2728, M7110, G33 and G32 (group G1) and G47 (group G4).

RESUMO A soja é uma das mais importantes comodities agrícolas mundiais, no entanto, devido ao intenso processo de melhoramento e sua forma de reprodução, vem perdendo diversidade genética ao longo das últimas décadas. Assim, o objetivo deste estudo foi avaliar o desempenho agronômico, estimar a diversidade genética entre as linhagens e identificar cruzamentos promissores. Para isto, foram avaliados 66 genótipos de soja, sendo 61 linhagens pré-comerciais e cinco cultivares comerciais (AS3797, DESAFIO, M7110, M7739, M8210) como controles. O delineamento experimental foi o de blocos ao acaso com três repetições. A matriz de distância entre as linhagens foi calculada pela distância de Mahalanobis e o agrupamento pelo método da ligação média entre grupos (UPGMA). A distância máxima foi de 1.776,26 entre as linhagens M7110 e G23, e a mínima de 1,50 entre as linhagens G13 e G36, sendo a distância média de 364,40, demonstrando a existência de diversidade genética. Os caracteres que mais contribuíram para a divergência genética foram número de dias para o florescimento (66,7%) e maturação fisiológica (28,55%). As linhagens G60 (maior produtividade de grãos), G51 e G33 (menor maturação fisiológica) e a cultivar M7110 (maior divergência) se destacaram. Formaram-se quatro grupos, sendo o grupo G1 com maior produtividade de grãos e menor número de dias para o florescimento e maturação fisiológica. Os cruzamentos indicados são entre G60, G57, CD2728, M7110, G33 e G32 (grupo G1) com a G47 (grupo G4).

ABSTRACT Purpose: This study aimed to report an experiment designed to determine anatomical changes in porcine corneas following placement of a novel polymer implant into the cornea. Methods: An ex vivo porcine eye model was used. A novel type I collagen-based vitrigel implant (6 mm in diameter) was shaped with an excimer laser on the posterior surface to create three planoconcave shapes. Implants were inserted into a manually dissected stromal pocket at a depth of approximately 200 μm. Three treatment groups were defined: group A (n=3), maximal ablation depth 70 μm; Group B (n=3), maximal ablation depth 64 μm; and group C (n=3), maximal ablation depth 104 μm, with a central hole. A control group (D, n=3) was included, in which a stromal pocket was created but biomaterial was not inserted. Eyes were evaluated by optical coherence tomography (OCT) and corneal tomography. Results: Corneal tomography showed a trend for a decreased mean keratometry in all four groups. Optical coherence tomography showed corneas with implants placed within the anterior stroma and visible flattening, whereas the corneas in the control group did not qualitatively change shape. Conclusions: The novel planoconcave biomaterial implant described herein could reshape the cornea in an ex vivo model, resulting in the flattening of the cornea. Further studies are needed using in vivo animal models to confirm such findings.

RESUMO Objetivo: Relatar um experimento projetado para determinar alterações anatômicas em córneas porcinas após a colocação de um novo implante de polímero na córnea. Métodos: Foi utilizado olho de porco ex vivo. Um novo agente modelador biocompatível, de colágeno tipo 1, com 6mm de diâmetro foi moldado com excimer laser em sua face posterior, para criar três formatos planocôncavos. Os implantes foram inseridos dentro de um bolsão, dissecado manualmente, a 200 micrômetros (μm). Foram definidos três grupos de tratamento: grupo A (n=3), teve a profundidade máxima de ablação de 70 μm; o grupo B (n=3), profundidade máxima de ablação de 64 μm; e o grupo C (n=3), profundidade máxima de ablação de 104 μm, com buraco central. O grupo controle, D (n=3), foi incluído, com a criação do bolsão estromal, porém sem inserir o material. A avaliação desses olhos foi realizada por tomografia de coerência óptica (OCT) e por tomografia corneana. Resultados: A tomografia corneana mostrou uma tendência para diminuição da ceratometria média em todos os 4 grupos. A tomografia de coerência óptica mostrou córneas com implantes localizados no estroma anterior e aplanamento visível, enquanto as córneas não mudaram qualitativamente o formato no grupo controle. Conclusões: O novo implante de biomaterial planocôncavo descrito aqui foi capaz de remodelar a córnea em modelo de animal ex vivo, resultando no aplanamento corneano. Novos estudos são necessários usando modelos animais in vivo para confirmar tais achados.

Infections in fruits caused by fungi reduce the quantity and quality of food for human consumption, in addition to causing economic losses. In this sense, this study aimed to address the effects of eugenol nanocapsules (NCs) based on chitosan and carboxymethylcellulose in protecting nectarines against Monilinia fructicola, a brown rot agent, a worldwide important disease. NCs were prepared by layer-by-layer (LbL) self-assembly starting from an anionic template and deposition with up to two polymeric layers. The hydrodynamic diameters ranged from 158 nm (nanoemulsion), 360 nm (one polymeric layer) to 398 nm (two polymeric layers). NCs presented, during the in vitro release, the release of eugenol following a first order process. In addition to being in the region of stability (zeta potential ca. |30| mV), the capsules showed good adhesion to the nectarine surface. In relation to brown rot, the eugenol NCs with chitosan proved to be the best formulation compared to nanoemulsion and NCs with two polymeric layers for its control, increasing the probability that the fruits remain without symptoms, even after 7 days. Therefore, this study demonstrated that chitosan NCs containing eugenol could be an alternative to preserve fruit for longer periods in post-harvest.

ABSTRACT Cowpea is a legume that is grown worldwide and used for different purposes, especially as green grains. However, considering the low availability of cowpea cultivars for green grain production, selecting genotypes that have better traits for this purpose is necessary. In this context, the objective of this study was to estimate genetic parameters and evaluate different selection indices for identifying superior cowpea genotypes and subsidizing cowpea breeding programs focused on green grain production. A field experiment was conducted at the Center of Agricultural Sciences of the Federal University of Ceará (UFC), Ceará, Brazil. The treatments consisted of 42 cowpea genotypes from the Active Germplasm Bank of the UFC. Fourteen traits were used for characterization. The experiment was conducted in an augmented block design with four controls. The data obtained were subjected to analysis of variance, and genetic parameters, correlations, and selection indices were determined. The traits days to flowering (DFL), days to fruiting (DFR), green pod weight (GPW), green pod width (GW), green pod length (GPL), green pod thickness (GPT), number of grains per pod (NGP), and green grain thickness (GGT) showed heritability higher than 70%, indicating that selection in an early generation is favorable. The genetic correlations between the trait pairs DFL×DFR, GPW×GPL, and GW×GGT were higher than the phenotypic and environmental correlations. Genotypes CE-228, CE-688, CE-994, CE-165, CE-796, and BRS-Paraguaçu showed simultaneous superiority for the evaluated traits and are the most appropriate for green grain production.

RESUMO O feijão-caupi é uma das leguminosas mais cultivadas no mundo, sendo comercializado para diversas finalidades, como o feijão verde. Considerando a reduzida disponibilidade de cultivares de feijão-caupi para o mercado de feijão verde, é necessário selecionar genótipos que ofereçam características intrínsecas para este fim. Assim, objetivou-se estimar parâmetros genéticos e índice de seleção na identificação de genótipos superiores de feijão-caupi, fornecendo subsídios para programas de melhoramento visando a produção de grãos verdes. O experimento foi conduzido em campo, no Centro de Ciências Agrárias da Universidade Federal do Ceará (UFC), Ceará, Brasil. Os tratamentos consistiram de 42 genótipos de feijão-caupi do Banco Ativo de Germoplasma da UFC. Quatorze descritores foram utilizados para a caracterização. O experimento foi montado em um delineamento de blocos aumentados, com quatro testemunhas adicionais. Foi realizada análise de variância, parâmetros genéticos, correlação e índices de seleção. As características de dias para floração, dias para frutificação, peso da vagem verde, largura da vagem verde, comprimento da vagem verde, espessura da vagem verde, número de grãos por vagem e espessura do grão verde apresentaram valores de herdabilidade acima de 70%, indicando que a seleção em geração precoce com base nestas características é favorável. As correlações genéticas entre os pares de caracteres DFL×DFR, GPW×GPL, e GW×GGT foram superiores às correlações fenotípicas e ambientais. Os genótipos CE-228, CE-688, CE-994, CE-165, CE-796 e BRS-Paraguaçu apresentam superioridade simultânea para as características avaliadas e os mais adequados para o mercado de grãos e vagens verdes.

This work describes a green synthesis, the characterization, and biological evaluation of silver nanoparticles (AgNPs). The AgNPs suspension was synthesized using aqueous leaf extract of Eucalyptus grandis, which presented a characteristic band at 407 nm in the UV-Vis spectrum. The AgNPs presented a spherical shape and size of 9.7 ± 0.3 nm. The nanoparticles were stable over a month, indicating that E. grandis’ extract is suitable for their preparation and stabilization. The X-ray analysis showed that the crystallinity of AgNPs corresponded to the centered face phase of silver. The antibacterial and leishmanicidal activities of AgNPs were evaluated. The AgNPs presented antibacterial activity on the Gram-negative bacteria Escherichia coli at 53.9 µg mL-1. The leishmanicidal activity evaluation against promastigote forms of Leishmania infantum, Leishmania amazonensis, and Leishmania braziliensis showed that the biological response is dependent on the volume of AgNP suspension. It was demonstrated that L. infantum was more sensitive to the nanoparticle’s treatment than L. amazonensis and L. braziliensis. The treatment of L infantum promastigotes with 150 µL of AgNP suspension reduced parasite growth by 67.9%, a result which was similar to the treatment with 1 (66.7%) or 2 µL (70.6%) of amphotericin B used as a positive control.

Mari-mari (Cassia leiandra Benth.) is an Amazonian native fruit that is highly appreciated in the northern region of Brazil, but there are few studies regarding its chemical composition and/or biological properties. A phytochemical study was conducted on the extracts of the pulp, peel and seeds; and their antioxidant, cytotoxic and antimicrobial potential were also determined. Methanol and acetone extracts from different fruit parts were subjected to total phenolic, 2,2-diphenyl-1 picrylhydrazyl (DPPH) radical scavenging and FeIII reducing capacity (FRAP) assays. From the peel extracts, the engeletin and astilbin could also be isolated and characterized based on nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. A quantification using ultra-fast liquid chromatography of acetone dry crude extracts (DCE) of the peel showed that engeletin was the main compound (532.77 mg g-1 DCE). Astilbin content was also determined (131.53 mg g-1 DCE). The antibacterial and antiproliferative activities were evaluated and the methanol extract of the peel showed higher growth inhibition activity against all tested bacteria. Engeletin showed a relevant antimicrobial effect against Staphylococcus aureus, Staphylococcus epidermidis and Escherichia coli. Acetone and methanol peel extracts exhibited a relevant inhibitory effect on the proliferation of breast carcinoma cells (MCF-7), with no toxicity to the normal cell line (NIH/3T3).

RESUMO Objetivo: Relatar um experimento projetado para determinar alterações anatômicas em córneas porcinas após a colocação de um novo implante de polímero na córnea. Métodos: Foi utilizado olho de porco ex vivo. Um novo agente modelador biocompatível, de colágeno tipo 1, com 6mm de diâmetro foi moldado com excimer laser em sua face posterior, para criar três formatos planocôncavos. Os implantes foram inseridos dentro de um bolsão, dissecado manualmente, a 200 micrômetros (μm). Foram definidos três grupos de tratamento: grupo A (n=3), teve a profundidade máxima de ablação de 70 μm; o grupo B (n=3), profundidade máxima de ablação de 64 μm; e o grupo C (n=3), profundidade máxima de ablação de 104 μm, com buraco central. O grupo controle, D (n=3), foi incluído, com a criação do bolsão estromal, porém sem inserir o material. A avaliação desses olhos foi realizada por tomografia de coerência óptica (OCT) e por tomografia corneana. Resultados: A tomografia corneana mostrou uma tendência para diminuição da ceratometria média em todos os 4 grupos. A tomografia de coerência óptica mostrou córneas com implantes localizados no estroma anterior e aplanamento visível, enquanto as córneas não mudaram qualitativamente o formato no grupo controle. Conclusões: O novo implante de biomaterial planocôncavo descrito aqui foi capaz de remodelar a córnea em modelo de animal ex vivo, resultando no aplanamento corneano. Novos estudos são necessários usando modelos animais in vivo para confirmar tais achados.

ABSTRACT Purpose: This study aimed to report an experiment designed to determine anatomical changes in porcine corneas following placement of a novel polymer implant into the cornea. Methods: An ex vivo porcine eye model was used. A novel type I collagen-based vitrigel implant (6 mm in diameter) was shaped with an excimer laser on the posterior surface to create three planoconcave shapes. Implants were inserted into a manually dissected stromal pocket at a depth of approximately 200 μm. Three treatment groups were defined: group A (n=3), maximal ablation depth 70 μm; Group B (n=3), maximal ablation depth 64 μm; and group C (n=3), maximal ablation depth 104 μm, with a central hole. A control group (D, n=3) was included, in which a stromal pocket was created but biomaterial was not inserted. Eyes were evaluated by optical coherence tomography (OCT) and corneal tomography. Results: Corneal tomography showed a trend for a decreased mean keratometry in all four groups. Optical coherence tomography showed corneas with implants placed within the anterior stroma and visible flattening, whereas the corneas in the control group did not qualitatively change shape. Conclusions: The novel planoconcave biomaterial implant described herein could reshape the cornea in an ex vivo model, resulting in the flattening of the cornea. Further studies are needed using in vivo animal models to confirm such findings.

Abstract The riverine population of the Amazon Basin are among the largest consumers of fish in the world, but the consumption patterns could be regionally distinct. Moreover, their total fish catches are not fully known. The objective of this work was to estimate the per capita fish consumption of the riverine people that inhabit the Paciência Island (Iranduba, Amazonas), where there is a fishing agreement in force. A total of 273 questionnaires were applied during the first two weeks of each month between April 2021 and March 2022. The sample unit was the residences. The questionnaire contained questions about the species captured and their quantities. Consumption was calculated by dividing the average monthly capture with the average number of residents per household interviewed, which was multiplied by the number of questionnaires applied. Thirty groups of consumed fish species belonging to 17 families and 5 orders were recorded. The total catch was 3,388.35 kg and the highest monthly catch was 602.60 kg during the falling-water season in October. Daily per capita fish consumption averaged 66.13 ± 29.21 g/day, with a peak of 116.45 g/day during the falling-water season in August. The high fish consumption rate highlighted the importance of fisheries management to food security and the maintenance of the community’s lifestyle.

Resumo As populações amazônicas são uma das maiores consumidoras de pescado do mundo, contudo os padrões de consumo podem ser regionalmente distintos. Além disso, as capturas totais não são totalmente conhecidas. O objetivo do trabalho foi estimar o consumo per capita e as capturas de pescado por ribeirinhos residentes na Ilha da Paciência (Iranduba, Amazonas), onde há um acordo de pesca vigente. Foram aplicados no total 273 questionários durante as duas primeiras semanas de cada mês entre abril de 2021 e março de 2022. A unidade amostral foram as residências. O questionário continha perguntas sobre as espécies capturadas e respectivas quantidades. O consumo foi calculado pela divisão entre a média de captura mensal com a média de moradores por residência entrevistada que foi multiplicada pelo número de questionários aplicados. Foram registrados 30 grupos de espécies de peixes consumidos pertencentes a 17 famílias e 5 ordens. A captura total foi de 3.388,35 kg e a maior captura mensal foi de 602,60 kg durante a vazante no mês de outubro. O consumo de pescado per capita diário foi em média 66,13 ± 29,21 g/dia, com pico de 116,45 g/dia durante a vazante no mês de agosto. A alta taxa de consumo de pescado mostra a importância do manejo pesqueiro para a segurança alimentar e a manutenção do estilo de vida da comunidade.

Abstract Water stress limits the initial growth and development of maize mass and grain, as well as the physiological process for absorbing the amount of mineral elements. The objective was to evaluate the effect of silicon on germination and growth of corn seedlings submitted to water deficit. The experiment was carried out in the laboratory and the experimental design was completely randomized (factorial 3 × 4), with three concentrations of calcium silicate (0.0; 1.0 and 2.0 mM) and 4 solutions of PEG-6000 to simulate different osmotic potentials (0, 0; -0.3; -0.6; -0.9 MPa). Germination percentage, germination speed index (GSI), mean germination time (MGT), percentage of non-germinated and abnormal germinated, length and dry matter of shoot, root and total seedlings were evaluated. Water deficiency reduced the parameters TG, GSI and MGT. The water deficit reduce the MSPA, MSR and MST with more than 80% reduction in mass from seedlings without deficiency to seedlings with deficiency. For CPA, CR and CT there was a reduction of at least 87%, 70% and 77%, respectively, among seeds without deficiency compared to seeds submitted to deficiency. The use of silicon in corn seeds did not attenuate the stress caused by water deficit simulated by PEG-6000.

Resumo O estresse hídrico limita o crescimento inicial e o desenvolvimento da massa e do grão de milho, assim como no processo fisiológico para a absorção da quantidade de elementos minerais. Objetivou-se avaliar o efeito do silício na germinação e no crescimento de plântulas de milho submetidas a deficiência hídrica. O experimento foi desenvolvido em laboratório e o delineamento experimental foi inteiramente casualizado (DIC) (fatorial 3 × 4), sendo três concentrações de Silicato de cálcio (0,0; 1,0 e 2,0 mM) e 4 soluções de PEG-6000 a simular diferentes potenciais osmóticos (0,0; -0,3; -0,6; -0,9 MPa). Foram avaliados a porcentagem de germinação, o índice de velocidade de germinação (IVG), o tempo médio de germinação (TMG), a porcentagem de não germinadas e de germinadas anormais, o comprimento e matéria seca da parte aérea, raiz e total das plântulas. A deficiência hídrica diminuiu os parâmetros TG, IVG e TMG. O déficit hídrico reduz a MSPA, MSR e MST com mais de 80% de redução da massa das plântulas sem deficiência para as plântulas com deficiência. Para CPA, CR e CT houve redução de, no mínimo, 87%, 70% e 77%, respectivamente entre as sementes sem deficiência em comparação as sementes submetidas a deficiência. A utilização de silício em sementes de milho não atenuou o estresse causado pela deficiência hídrica simulada por PEG-6000.

Abstract The Global South has witnessed increasing sampling of its immense biological diversity during the past century. However, the diversity of many regions remains unknown, even at pristine and highly threatened places, such as in the Atlantic Forest; and for bioindicator, umbrella, and flagship groups. The present study reports the first butterfly list of the Parque Estadual Intervales, São Paulo, Brazil and surroundings, a key protected area in the last massive continuous of the Atlantic Forest. We compiled data from museums and four years of field work, under three sampling methods. We also aimed at providing resources to support conservation efforts by analyzing 27 years of climatic data (detailed in the Supplementary Material, in English and in Portuguese), discussing our results also for non-academics, and producing scientific outreach and educational material. A companion article dealt with the experiences of science outreach and capacity development, and illustrated the butterfly catalogue of the species sampled in the park. We found 312 species that sum to 2,139 records. The museum had 229 species (432 records), and we sampled 142 species (1,682 individuals), in a total effort of 36,679 sampling hours (36,432 trap and 247 net and observation hours). The richest families were Nymphalidae (148 species) and Hesperiidae (100 species). Most species were sampled exclusively by active methods (79.8%), but other sources (passive sampling, citizen science, etc.) also found unique records. We found the highest diversity metrics from January to May, and we demonstrated that winter months had less richness and abundance. We illustrated the 20 species common to all regions, and listed those that were found more than seven months in the year, as well as the most abundant species in trap sampling, with forest dwellers as well as species common to open and fragmented areas. The dominant species in our trap datasets was the iridescent white morpho, Morpho epistrophus (Fabricius, 1796), and we suggest it to become the park butterfly mascot.

Resumo O Sul Global testemunhou crescente amostragem de sua imensa diversidade biológica durante o século passado. Entretanto, a diversidade de muitas regiões permanece desconhecida, mesmo em locais pristinos e altamente ameaçados, como na Mata Atlântica; e para grupos bioindicadores, guarda-chuva e emblemáticos. O presente estudo reporta a primeira lista de borboletas do Parque Estadual Intervales, São Paulo, Brasil e arredores, uma unidade de conservação chave no último maciço contínuo de Mata Atlântica. Compilamos dados de museus e quatro anos de campo, sob três métodos de amostragem. Também visamos oferecer recursos para apoiar os esforços de conservação, analisando 27 anos de dados climáticos (detalhados no Material Suplementar, em inglês e em português), discutindo nossos resultados numa linguagem também para não acadêmicos, e produzindo material de divulgação científica e educativos. Um artigo irmão tratou das experiências de divulgação científica e capacitação, e ilustrou o catálogo de borboletas das espécies amostradas no parque. Encontramos 312 espécies em 2.139 registros. O museu tinha 229 espécies (432 registros), e amostramos 142 espécies (1.682 indivíduos), em um esforço total de 36.679 horas de amostragem (36.432 armadilhas e 247 horas de rede e observação). As famílias mais ricas foram Nymphalidae (148 espécies) e Hesperiidae (100 espécies). A maioria das espécies foi amostrada exclusivamente por métodos ativos (79,8%), mas outras fontes (passiva, ciência cidadã, etc.) também encontraram registros únicos. Encontramos as maiores métricas de diversidade de janeiro a maio, e demonstramos que os meses de inverno tiveram menos riqueza e abundância. Ilustramos as 20 espécies comuns a todas as regiões, e listamos aquelas que foram encontradas em mais de sete meses no ano, bem como as espécies mais abundantes em armadilhas, com espécies florestais e também comuns em áreas abertas e fragmentadas. A espécie dominante em nossas armadilhas foi a morfo branca iridescente, Morpho epistrophus (Fabricius, 1796), e sugerimos que se torne a borboleta mascote do parque.

Hydrogen embrittlement (HE) in API 5L X70 steel was investigated by testing notched and unnotched uniaxial tensile specimens and single-edge tension specimen, SE(T). Apparent hydrogen diffusivity (Dapp = 1.4 x 10-10 m2/s) and solubility (Sapp = 4.9 mol H/m3) were determined by electrochemical hydrogen permeation tests. Through mathematical fitting, it was possible to separate the strong traps present at the beginning of the first permeation curve (φ = 0.43 mol H/m3). Uniaxial tensile tests showed a loss of ductility of up to 33% in the hydrogenated condition. Fracture mechanics tests exhibited a toughness decrease of 14% after exposure to hydrogen. The high resistance to HE was presented suggesting that these microalloyed steels can solubilize hydrogen in the matrix with low segregation, reducing the impact on embrittlement. A mix of ductile and quasi-cleavage fracture was observed in the hydrogenated samples with an increased stress triaxiality.

Abstract The objective of this study was to verify the flight radius and the influence of the climatic season and period of the day on the external activity of Melipona rufiventris bees. The forager bees were released at different distances to evaluate the flight radius. The following were considered for external activities in the four different seasons of the year (Winter, Autumn, Spring, Summer): the entry with no apparent load was considered as nectar/water, entry with defined and opaque mass in the corbicula was considered as pollen, the entry with undefined and shiny mass in the corbicula was considered as resin/clay or bee exit no load and removal of debris, mass trapped by the jaws. Assessments were performed between 6 am and 6 pm each month. M. rufiventris can reach distances of 2 500 meters, however the return decreases as the distance increases. The species performs all activities in and out of the colony during all seasons of the year and periods between 6 am and 6 pm but reduce nectar/water collection and exit from the box without apparent load and with debris between 6:00 am and 10 am in winter. It is concluded that distances greater than 1 500 meters hinder the external activity of bees which is influenced by air temperature, air humidity, time of day, season of the year and food availability.

Resumo Objetivou-se com esse estudo verificar o raio de voo e a influência da estação climática e período do dia na atividade externa das abelhas Melipona rufiventris. As abelhas forrageiras foram soltas em diferentes distâncias para avaliar o raio de voo. Para as atividades externas nas quatro diferentes estações do ano (Inverno, Outono, Primavera, Verão) foram consideradas: a entrada sem carga aparente como néctar/água, a entrada com massa definida e opaca na corbícula caracterizada como pólen, a entrada com massa indefinida e brilhante na corbícula caracterizada como resina/argila ou ainda a saída de abelha sem carga e remoção de detritos, massa presa pelas mandíbulas. As avaliações foram realizadas entre 6h e 18h de cada mês. M. rufiventris pode atingir distâncias de 2500 metros, porém o retorno diminui à medida que a distância aumenta. A espécie realiza todas as atividades dentro e fora da colônia durante todas as estações do ano e períodos entre 6h e 18h, mas reduz a coleta de néctar/água e saída caixa sem carga aparente e com detritos entre 6h e 10h no inverno. Conclui-se que distâncias superiores a 1500 metros reduzem a atividade externa das abelhas que é influenciada pela temperatura e umidade do ar, hora do dia, estação do ano e disponibilidade de alimentos.

Abstract The selection of parents to originate promising base populations, as well as the knowledge of the gene effects controlling agronomic traits by means of diallel, are useful to drive genetic gains in Brazilian tropical wheat breeding programs. The goals of this study were to select tropical wheat parents with a high frequency of favorable alleles and segregating populations with high potential to originate superior progenies through partial diallel analysis. Thus, 14 parents were divided in two groups and crossed in a 7 × 7 partial diallel scheme to originate 49 F1 combinations. After obtaining F2 generation, the populations and the parents were evaluated in the field in the summer of 2021. Days for heading, plant height, rust and yellow spot resistance, and grain yield were evaluated. The data were subjected to partial diallel analysis. There were significant effects of general combining ability for all traits. The specific combining ability effect was significant for days for heading and plant height. The additive gene effects were predominant over the non-additive ones. The parents with the highest frequency of favorable alleles for the traits evaluated were selected in each group. Four populations with high genetic potential to originate superior progenies were selected.

ABSTRACT The use of spontaneous species from the Caatinga biome as green manure is a promising practice in increasing the productivity of agricultural systems and sustainable exploitation of the environment. This study aimed to estimate the maximum physical and economic efficiencies of radish agroeconomic characteristics in monocropping as a function of roostertree (Calotropis procera (Ait.) R. Br) biomass amounts in two cropping seasons in a semi-arid environment. The experimental design was randomized complete blocks with five treatments and five replications. The treatments consisted of different roostertree biomass amounts: 16, 29, 42, 55, and 68 t ha-1 on a dry basis, incorporated into the soil. In each block, two additional treatments were added, one without fertilization (control) and the other with mineral fertilizer, for comparison purposes with the maximum efficiency treatment. The radish cultivar planted was ‘Crimson Gigante’. The fertilization of the radish to obtain the maximum optimized productive efficiency (9.56 t ha-1) was possible with the incorporation of 50.86 t ha-1 of C. procera dry biomass into the soil. The maximum optimized agroeconomic efficiency (based on a net income of 37,641.08 R$ ha-1) of radish cultivation was obtained with 44.39 t ha-1 of C. procera dry biomass added to the soil. The rate of return and the profit margin obtained were 2.94 R$ for each real invested, with a profit margin of 62.55%. The use of biomass from the C. procera green manure is a viable technology for producers who practice radish monoculture in a semi-arid environment.

RESUMO O uso de espécies espontâneas do bioma Caatinga como adubo verde é uma prática promissora no aumento da produtividade dos sistemas agrícolas e na exploração sustentável do meio ambiente. Este trabalho teve como objetivo estimar as máximas eficiências físicas e econômicas das características agroeconômicas do rabanete em monocultivo, em função de quantidades de biomassa de flor-deseda em duas estações de cultivos em ambiente semiárido. O delineamento experimental utilizado foi em blocos casualizados com cinco tratamentos e cinco repetições. Os tratamentos consistiram de diferentes quantidades de biomassa de flor-de-seda: 16, 29, 42, 55 e 68 t ha-1 em base seca, incorporadas ao solo. Em cada bloco dos experimentos foram adicionados dois tratamentos, um sem adubação (tratamento testemunha) e outro com adubo mineral, para fins de comparação com o tratamento de máxima eficiência. A cultivar de rabanete plantada foi a Crimson Gigante. A adubação do rabanete para obtenção da máxima eficiência produtiva otimizada (9,56 t ha-1) foi possível com a incorporação de 50,86 t ha-1 de biomassa seca de C. procera ao solo. A máxima eficiência agroeconômica otimizada (baseada na renda líquida de 37.641,08 R$ ha-1) foi obtida com a quantidade de 44,39 t ha-1 de biomassa seca de C. procera adicionada ao solo. A taxa de retorno e a margem de lucro obtida foram de R$ 2,94 para cada real investido com margem de lucro de 62,55%. A utilização da biomassa do adubo verde, C. procera, é uma tecnologia viável para produtores que praticam o monocultivo de rabanete em ambiente semiárido.

Abstract This paper presents an equipment for monitoring synchronous generators condition through characteristics of the time derivative of the external magnetic field. The developed monitoring methodology allows the identification of established or incipient faults, by detecting changes in the magnetic signature of the synchronous generator. In this methodology, the measurement of signals outside the machine gives this equipment a non-invasive characteristic, allowing its monitoring without interfering or disturbing its operation. The developed system includes the specification of magnetic field sensors, signal measurement and processing equipment, as well as software for analysis and monitoring. The validation of the methodology used in this system was carried out through the analysis of experimental data, presenting efficient results in the detection of electrical and mechanical faults in synchronous generators of an experimental test bench and a hydroelectric power plant. As a result, the commercial specification of this equipment was obtained and two units were implemented in a hydroelectric power plant to monitor 305 MVA synchronous generators.