Open-access Exploring the infrared gluon and ghost propagators using large asymmetric lattices

Abstract

We report on the infrared limit of the quenched lattice Landau gauge gluon propagator computed from large asymmetric lattices. In particular, the compatibility of the pure power law infrared solution (q²)²kappa of the Dyson-Schwinger equations is investigated and the exponent kappa is measured. The lattice data favours kappa ~ 0.52, which would imply a vanishing zero momentum gluon propagator as predicted by the Kugo-Ojima confinement mechanism and the Zwanziger horizon condition. Results for the ghost propagator and for the running coupling constant are shown.

Lattice QCD; Landau gauge; Confinement; Gluon propagator; Ghost propagator; Running coupling constant


Exploring the infrared gluon and ghost propagators using large asymmetric lattices

O. Oliveira; P. J. Silva

Centro de Física Computacional Departamento de Física, Universidade de Coimbra P-3004-516 Coimbra Portugal

ABSTRACT

We report on the infrared limit of the quenched lattice Landau gauge gluon propagator computed from large asymmetric lattices. In particular, the compatibility of the pure power law infrared solution (q2)2k of the Dyson-Schwinger equations is investigated and the exponent k is measured. The lattice data favours k ~ 0.52, which would imply a vanishing zero momentum gluon propagator as predicted by the Kugo-Ojima confinement mechanism and the Zwanziger horizon condition. Results for the ghost propagator and for the running coupling constant are shown.

Keywords: Lattice QCD; Landau gauge; Confinement; Gluon propagator; Ghost propagator; Running coupling constant

I. INTRODUCTION AND MOTIVATION

The mechanism of quark and gluon confinement is not fully understood yet. The study of the fundamental Green's functions of Quantum Chromodynamics (QCD), namely the gluon and ghost propagators, can help in the understanding of such mechanism. Indeed, there are gluon confinement criteria connected with the behaviour of the propagators at zero momentum. In particular, the Zwanziger horizon condition implies a null zero momentum gluon propagator D(q2), and the Kugo-Ojima confinement mechanism requires an infinite zero momentum ghost propagator G(q2). The violation of positivity for the gluon propagator can also be seen as a signal for confinement [1].

In QCD, the investigation of its infrared limit has to rely on non-perturbative methods like the Dyson-Schwinger equations (DSE) and lattice QCD. Both methods have good and bad features, namely we can solve analitically the DSE in the infrared, but one has to rely on a truncation of an infinite tower of equations. On the lattice, one includes all non-perturbative physics, but one has to care about finite volume and finite lattice spacing effects.

Recent studies of Dyson-Schwinger equations obtained a pure power law behaviour for the infrared gluon and ghost dressing functions,

with k = 0.595 [2], which implies a vanishing (infinite) gluon (ghost) propagator for zero momentum. Studies using functional renormalization equations [3, 4] provided bounds in the possible values of the infrared exponent 0.52 < k < 0.595. The infrared exponent obtained from time independent stochastic quantisation [5] is within these bounds (k = 0.52145).

As an infrared (IR) analytical solution of DSE, the pure power law is valid only for very low momenta. In figure 1, the DSE gluon and ghost propagators [6] are compared with the corresponding pure power law solution. Note that for the gluon propagator the power law is valid only for momenta below 200 MeV, and for the ghost the infrared solution is restricted to even lower momenta. If one wants to use lattice QCD to check for a pure power law behaviour, certainly one should consider a lattice volume sufficiently large to accomodate a minimum number of points in the region of interest. For symmetric lattices this would require a too large volume. A cheaper solution is the use of large asymmetric lattices × Lt, with Lt » Ls. For example, in [7-12] we use a set of asymmetric lattices with Lt = 256 and Ls = 8,10,...,18 (see [10] for the technical details of the simulations). The large temporal size of these lattices allow to access to momenta as low as 48 MeV. Of course, the price to pay are finite volume effects caused by the small value of Ls.


Recently, some criticism have been raised against the use of asymmetric lattices to study the infrared limit of QCD Green's functions. In [13], the authors studied the gluon and ghost propagators in SU(2) 3-d theory and reported systematic effects due to the asymmetry of the lattice, if one compares with a symmetric one. Of course, this comparison cannot be done in our case. Also in [14] the author reported asymmetry effects in the propagators. However, in what concerns the gluon propagator, such effects have been already investigated in [9]. Furthermore, in [9, 10] it is shown that the approach Ls ® + ¥ is smooth. Indeed, a quick look at the gluon and ghost data in [13], again, suggests that the approach Ls ® + ¥ is smooth, i. e. that the largest symmetric propagators can be obtained by extrapolation of the asymmetric ones. In what concerns the quantitative results coming from a single large asymmetric lattice, all the above studies show that they provide, at least, a bound on the infinite volume limit. Here we report on the status of our investigations concerning the use of asymmetric lattices to study the infrared properties of QCD. In what concerns the positivity violation of the gluon propagator, our results can be seen in [12].

II. EXTRACTING THE INFRARED EXPONENT k FROM THE GLUON PROPAGATOR

In [10], we have computed the gluon propagator

for SU(3) four-dimensional asymmetric lattices × 256, with Ls= 8,10,...,18. To check that the temporal size is large enough, 164 163 ×128 Wilson action gauge configurations were generated. In what concerns the gluon propagator for time-like momenta, there are no differences between the 163×128 and 163×256 data (see figure 2). This gives us confidence that the temporal extension of our lattices is sufficiently large.


In what concerns the spatial size, it was observed that the propagator depends on the spatial size of the lattice (see figure 3). The gluon propagator decreases with the volume for the smallest momenta and increases with the volume for higher momenta.


In order to compute the infrared exponent k from the lattice data, we considered fits of the smallest temporal momenta of the gluon dressing function Zgluon(q2) to a pure power law with and without polinomial corrections. The results are in table I. In general, the k values increase with the volume of the lattice. So, our k can be read as lower bounds in the infinite volume figure k¥.

Considering a linear or quadratic dependence on the inverse of the volume for the infrared exponent, we can try to extrapolate the figures of table I. In what concerns the results for the pure power law fits, they are not described by these functional forms. Using the corrections to the pure power law, one gets values for k¥ in the interval [0.51,0.56]; the weighted mean value being ¥ = 0.5246(46).

On the other hand, one can also extrapolate directly the gluon propagator, as a function of the inverse of the volume, to the infinite volume limit, fitting each timelike momentum propagator separately. Doing so, we are taking the limit Ls ® ¥ , assuming a sufficient number of points in the temporal direction. Several types of polinomial extrapolations were tried, using different sets of lattices, and we conclude that the data is better described by quadratic extrapolations of the data from the 4th and 5th largest lattices. In figure 4 the two extrapolations of the gluon propagator are shown. For comparisation, we also include the 163×48 and 323×64 propagators computed in [25].


The values of k extracted from these extrapolated propagators are k = 0.5215(29), with a c2/d.o.f. = 0.02, using the largest 5 lattices in the extrapolation, and k = 0.4979(66), c2 / d.o.f. = 0.27 using the largest 4 lattices. Fitting the extrapolated data to the polinomial corrections to the pure power law, one can get higher values for k. Note that the first value is on the top of the value obtained from extrapolating directly k as a function of the volume. In conclusion, one can claim a k Î [0.49,0.53], with the lattice data favouring the right hand side of the interval.

III. ARE DSE FITTING FORMS REPRODUCED BY LATTICE DATA?

In this section we will try to check if the pure temporal lattice data of the gluon propagator can be described by some functional forms that fitted the solution for the gluon propagator in Landau gauge of the Dyson-Schwinger equations reported in [15, 16]. Only the largest lattices will be considered.

A. The infrared region

In the IR region, the continuum DSE solution is well described by the following expressions [15],

The first functional form has a branch cut in the IR region. The last one has a pole in the IR region.

In what concerns the lattice propagator, both formulas provide good fits up to the maximum of the dressing function - see table II and figure 5. However, the measured infrared exponents are larger than those obtained assuming a pure power law for the IR region [10], and support an infrared vanishing gluon propagator.


The lattice propagator, for the full range of pure temporal momenta, was fitted to

with B(q2) = Zpole,cut. Two different definitions for the running coupling were considered [15, 16]:

The fits using aP(q2) (using b0 = 11) for the running coupling have a c2/d.o.f. > 2 for Ls = 16. However, for the largest lattice, 183 ×256, the data is well described; see table III and figure 6.


Note that only when one uses B = Zpole the k values agree with those from the IR fits. However, LQCD is not compatible with the IR values. The fitting form differs from the lattice data mainly at the maximum of the dressing function ( ~ 0.8 GeV).

The lattice data adjusts better to aLN(q2) than to the previously considered running coupling. Indeed, looking at the fitting results for our largest lattice (see tables IV and V), the values of k and LQCD are essentially the values obtained in the IR study. Moreover, on overall there is good agreement between the fitting function and the lattice data, see figure 7.


The running coupling at zero momentum can be measured from aLN(q2) [7, 8] and is related with the high momentum behaviour of the running coupling, a(0) = (4p/b0) a2 . The measured a(0) are reported in table VI. Note that the values from the 163 × 128 and 163 × 256 data agree within one standard deviation. Furthermore, a(0) increases with Ls and the fitted values reported in table VI are around the original DSE estimation for a(0) = 2.972 [2].

IV. GRIBOV COPIES EFFECTS IN THE PROPAGATORS

The propagators are gauge dependent quantities. To compute them, one has to choose a gauge. For the Landau gauge on the lattice, the procedure consists in maximizing the functional,

It is well known that this functional has, in general, several maxima, the Gribov copies [19]. To properly define a non-perturbative gauge fixing, one should choose the gauge transformation g(x) that globally maximizes (9). This is a global optimization problem and it is not easy to find the global maximum of (9). In most studies of the gluon and ghost propagators one chooses a local maximum of (9), hoping that the Gribov copy effects in the propagators are small.

On the lattice, several studies reported Gribov effects in the ghost propagator (see, for example, [11, 17, 18], and the next section), but it is generally accepted that Gribov copies do not change significantly the gluon propagator.

However, there are some studies reporting Gribov copy effects in the gluon propagator. In [20], the problem of the Gribov copies effects on the gluon propagator was studied, and some differences were found. It was claimed a two to three s effect due to Gribov copies in the low momentum region. Furthermore, it was observed, by sorting the different Gribov copies according to the value of the gauge fixing functional, that the propagator for the lowest momenta behaves monotonically as a function of < FU > : for zero momentum, the propagator increases with < FU > , and for some small non-zero momenta the propagator decreases with < FU > . There is also a study [21] where the authors claim that the enlargement of the gauge orbits allows for Gribov effects in the gluon propagator.

In what concerns asymmetric lattices, CEASD gauge fixing method [22] was applied to the 163 × 128 configurations. This global optimization method for Landau gauge fixing combines a genetic algorithm with a local gauge fixing method, aiming to find the global maximum of (9). The obtained gluon propagator was compared with the one computed from a local maximum of (9); this local maximum is obtained using the local gauge fixing method described in [28]. In fig. 8, we can see the ratio between the two propagators.


Although there are many momenta for which the ratio is not compatible with one, we cannot conclude in favour of any systematic effect.

V. GHOST PROPAGATOR AND RUNNING COUPLING CONSTANT

A. Ghost propagator

For our smallest lattices (103 × 256, 123 × 256, 163 × 128), we have computed the ghost propagator [11],

using both a point source method [23] (we averaged over 7 different point sources to get a better statistics), and a plane-wave source [17]. In both cases we used the preconditioned conjugate algorithm, as described in [18]. The advantage of using a plane-wave source being that the statistical accuracy is much better, but we can only obtain one momentum component at a time. Using a point source method one can get all the momenta in once, but with larger statistical errors.

In figures 9 and 10 it is shown the ghost dressing function Zghost(q2) for 123 × 256 and 163 × 128 computed with both methods. For the 123 × 256, the point source data is not smooth for a large range of momenta. This is true also for 103 × 256 lattice , but this effect is significantly reduced for 163 × 128. In what concerns finite volume effects, we see differences, in the infrared, between pure temporal and pure spatial data, as in the gluon case.



In figure 11 one can see the ghost dressing function only for the plane-wave data. As in the gluon case, we are able to evaluate the effect of Gribov copies on the lattice 163 × 128 by considering different gauge fixing methods. One can see clear effects of Gribov copies, as expected from other studies [17, 18]. Also, we see finite volume effects if one compares propagators computed from lattices with different spatial sizes.


In what concerns the infrared region, we were unable to fit a pure power law, even considering polinomial corrections [11]. This negative result can be due either to the finite volume effects caused by the small spatial extension of our lattices, or to an insufficient number of points in the infrared region - note that for the ghost propagator, the pure power law lacks validity well below 200 MeV (see figure 1).

B. Running coupling constant

Using the gluon and ghost dressing functions, one can define a running coupling constant as

The DSE infrared analysis predicts a running coupling constant at zero momentum different from zero, aS(0) = 2.972 [2]. On the other hand, the DSE solution on a torus [24], and results from lattice simulations [11, 18, 26, 27], shows a decreasing coupling constant for small momenta. Using an asymmetric lattice allow us to study smaller momenta having in mind to provide, at least, a hint to this puzzle.

Again, our lattice data shows finite volume effects, if one compares pure temporal and pure spatial momenta, see figure 12. Comparing the results for all available lattices (plane-wave source), see figure 13, we can see, as in the ghost case, finite volume effects, and clear Gribov copies effects.



In what concerns the infrared behaviour, we tried to fit the lowest momenta to a pure power law, (q2)ka. We concluded that this power law is only compatible with the data from 163 × 128 lattice, gauge fixed with CEASD method, giving ka ~ 0.688, with c2/d.o.f. ~ 0.011. The reader should be aware that it is also possible, in some cases, to fit the infrared data to a(0) (1 + aq2 + ...) and get a a(0) ¹ 0. Therefore, we can not give a definitive answer about the behaviour of the running coupling constant for q = 0. Note, however, that aS (q2) for the smallest momenta, seems to increase as a function of the volume.

VI. CONCLUSIONS

In this work asymmetric lattices were used to study the infrared behaviour of QCD propagators.

In what concerns the gluon propagator, the lattice data is well described by a pure power law (q2)2k for momenta below 150 MeV. The value of the infrared exponent increases with the volume, so our k's can be read as lower bounds of the infinite volume figure. Extrapolating the gluon propagator to the infinite volume limit, assuming a sufficient temporal size of our lattices, one gets k Î [0.49,0.53]. Unfortunately, we can not give a definitive answer about the behaviour of the gluon propagator at zero momentum. Note, however, that the lattice data favours the right hand side of the given interval, and that using other fitting forms and a larger range of momenta, one always get k > 0.5.

In what concerns the ghost propagator, we were not able to extract a pure power law on the available results. We observed finite volume effects and clear Gribov copies effects on this propagator, in agreement with other studies.

Finally, we observed a decreasing running coupling for low momenta, in agreement with previous simulations.

Acknowledgements

This work was supported by FCT via grant SFRH/BD/10740/2002, and by project POCI/FP/63436/2005.

[11] O. Oliveira, P. J. Silva, accepted to Eur. Phys. J. A [hep-lat/0609027].

[14] Andre Sternbeck, PhD thesis, hep-lat/0609016.

Received on 21 September, 2006

References

  • [1] For details on these topics see, for example, R. Alkofer, L. von Smekal, Phys. Rept. 353, 281 (2001), and references therein.
  • [2] C. Lerche, L. von Smekal, Phys. Rev. D 65, 125006 (2002).
  • [3] J. M. Pawlowski, D. F. Litim, S. Nedelko, and L. von Smekal, Phys. Rev. Lett. 93, 152002 (2004).
  • [4] C. S. Fischer, H. Gies, JHEP 0410, 048 (2004).
  • [5] D. Zwanziger, Phys. Rev. D 67, 105001 (2003).
  • [6] C. S. Fischer, M. R. Pennington, Phys. Rev. D 73, 034029 (2006).
  • [7] O. Oliveira, P. J. Silva, AIP Conf. Proc. 756, 290 (2005).
  • [8] P. J. Silva, O. Oliveira, PoS(LAT2005)286.
  • [9] O. Oliveira, P. J. Silva, PoS(LAT2005)287.
  • [10] P. J. Silva, O. Oliveira, Phys. Rev. D 74, 034513 (2006).
  • [12] O. Oliveira, P. J. Silva, PoS(LAT2006)075.
  • [13] A. Cucchieri, T. Mendes, Phys. Rev. D 73, 071502 (2006).
  • [15] R. Alkofer, W. Detmold, C.S. Fischer, and P. Maris, Phys. Rev. D 70, 014014 (2004).
  • [16] C. S. Fischer, R. Alkofer, Phys. Rev. D 67, 094020 (2003).
  • [17] A. Cucchieri, Nucl. Phys. B 508, 353 (1997).
  • [18] A. Sternbeck, E.-M. Ilgenfritz, M. Müller-Preussker, and A. Schiller, Phys. Rev. D 72, 014507 (2005).
  • [19] V. N. Gribov, Nucl. Phys. B 139, 1 (1978).
  • [20] P. J. Silva, O. Oliveira, Nucl. Phys. B 690, 177 (2004).
  • [21] I. L. Bogolubsky, G. Burgio, V. K. Mitrjushkin, and M. Müller-Preussker, Phys. Rev. D 74, 034503 (2006).
  • [22] O. Oliveira, P.J. Silva, Comp. Phys. Comm. 158, 73 (2004).
  • [23] H. Suman, K. Schilling, Phys. Lett. B 373, 314 (1996).
  • [24] C. S. Fischer, B. Gruter, and R. Alkofer, Annals Phys. 321, 1918 (2006).
  • [25] D. B. Leinweber, J. I. Skullerud, A. G. Williams, and C. Parrinello, Phys. Rev. D 60, 094507 (1999); 61, 079901 (2000).
  • [26] S. Furui, H. Nakajima, Phys. Rev. D 69, 074505 (2004).
  • [27] S. Furui, H. Nakajima, Phys. Rev. D 70, 094504 (2004).
  • [28] C. H. T. Davies, G. G. Batrouni, G. P. Katz, A. S. Kronfeld, G. P. Lepage, P. Rossi, B. Svetitsky, and K. G. Wilson, Phys. Rev. D 37, 1581 (1988).
  • Publication Dates

    • Publication in this collection
      11 May 2007
    • Date of issue
      Mar 2007

    History

    • Received
      21 Sept 2006
    location_on
    Sociedade Brasileira de Física Caixa Postal 66328, 05315-970 São Paulo SP - Brazil, Tel.: +55 11 3091-6922, Fax: (55 11) 3816-2063 - São Paulo - SP - Brazil
    E-mail: sbfisica@sbfisica.org.br
    rss_feed Stay informed of issues for this journal through your RSS reader
    Acessibilidade / Reportar erro