Abstract
Tris-heteroleptic ruthenium(II) cis-[Ru(Me4-phen)(dcbH2)(NCS)2], where Me4-phen = 3,4,7,8-tetramethyl-1,10-phenanthroline, dcbH2 = 4,4'-dicarboxylic acid 2,2'-bipyridine, was synthesized, purified and characterized. Its characteristics were compared with those determined for cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and cis-[Ru(phen)(dcbH2)(NCS)2] aiming to evaluate the effect of the number of methyl groups on the properties of the compounds. Changes in the Fourier transform infrared (FTIR) and 1H nuclear magnetic resonance (NMR) spectra indicated a modification in the electronic distribution of the complex because of the presence of methyl groups at the 3 and 8 positions of 1,10-phenanthroline. These changes also modified the excited state properties and resulted in a blue shift of the absorption and emission spectra. The complex was incorporated onto TiO2 to prepare dye-sensitized solar cells, achieving up to JSC = 11.9 mA cm–2, VOC = 0.627 V, ff = 0.67 and η = 5.0%.
Keywords:
ruthenium(II) polypyridyl dyes; dye-sensitized solar cells; energy conversion
Introduction
The annual world energy consumption reached 5.5 × 102020 Reynal, A.; Forneli, A.; Martinez-Ferrero, E.; Sanchez-Diaz, A.; Vidal-Ferran, A.; Palomares, E.; Eur. J. Inorg. Chem.2008, 1955. J in 2010, and it is expected to reach 8.7 × 102020 Reynal, A.; Forneli, A.; Martinez-Ferrero, E.; Sanchez-Diaz, A.; Vidal-Ferran, A.; Palomares, E.; Eur. J. Inorg. Chem.2008, 1955. J in 2040 as result of population and economic growth.11 Reynal, A.; Palomares, E.; Eur. J. Inorg. Chem.2011, 4509.,22 Gratzel, M.; Inorg. Chem.2005, 44, 6841. The main sources responsible for the world's energetic needs are liquid fuels, coal and natural gas, which have several disadvantages because they are not renewable and because they emit large quantities of pollutants to the atmosphere.33 Souza, S. S.; Patrocinio, A. O. T.; Quim. Nova2014, 37, 886. For these reasons, the conversion of solar energy is extremely attractive due to its low environmental impact, infinite supply of energy and its straightforward use in remote areas.44 de Souza, J. S.; de Andrade, L. O. M.; Polo, A. S. In Nanoenergy; de Souza, F. L.; Leite, E. R., eds.; Springer: Heidelberg, 2013, p. 49. Dye-sensitized solar cells (DSSCs) are capable of directly converting sunlight into electricity, and so they could potentially fulfill the world's energy needs. Thus, these devices have attracted considerable attention in recent years.55 Bignozzi, C. A.; Argazzi, R.; Boaretto, R.; Busatto, E.; Carli, S.; Ronconi, F.; Caramori, S.; Coord. Chem. Rev.2013, 257, 1472.
6 Caramori, S.; Cristino, V.; Boaretto, R.; Argazzi, R.; Bignozzi, C. A.; Di Carlo, A.; Int. J. Photoenergy2010, 16.
7 O'Regan, B. C.; Durrant, J. R.; Acc. Chem. Res.2009, 42, 1799.
8 Ghosh, B.; Naskar, S.; Naskar, S.; Espinosa, A.; Hau, S. C. K.; Mak, T. C. W.; Sekiya, R.; Kuroda, R.; Chattopadhyay, S. K.; Polyhedron2014, 72, 115.
9 Ludin, N. A.; Mahmoud, A.; Mohamad, A. B.; Kadhum, A. A. H.; Sopian, K.; Karim, N. S. A.; Renewable Sustainable Energy Rev.2014, 31, 386.
10 Sun, Y. L.; Onicha, A. C.; Myahkostupov, M.; Castellano, F. N.; ACS Appl. Mater. Interfaces2010, 2, 2039.
11 Siu, C. H.; Ho, C. L.; He, J.; Chen, T.; Majumda, P.; Zhao, J. Z.; Li, H.; Wong, W. Y.; Polyhedron2014, 82, 71.
12 Urbani, M.; Medel, M.; Kumar, S. A.; Chandiran, A. K.; Gonzalez-Rodriguez, D.; Gratzel, M.; Nazeeruddin, M. K.; Torres, T.; Polyhedron2014, 82, 132.
13 Li, G.; Hu, K.; Robson, K. C. D.; Gorelsky, S. I.; Meyer, G. J.; Berlinguette, C. P.; Shatruk, M.; Chem. Eur. J.2015, 21, 2173.
14 Nazeeruddin, M. K.; Kay, A.; Rodicio, I.; Humphry-Baker, R.; Müller, E.; Liska, P.; Vlachopoulos, N.; Grätzel, M.; J. Am. Chem. Soc.1993, 115, 6382.
15 Oregan, B.; Gratzel, M.; Nature1991, 353, 737.-1616 Zakeeruddin, S. M.; Nazeeruddin, M. K.; Humphry-Baker, R.; Pechy, P.; Quagliotto, P.; Barolo, C.; Viscardi, G.; Gratzel, M.; Langmuir2002, 18, 952.
The dye sensitizer is the component responsible for harvesting the sunlight and initiating the energy conversion process. Currently, ruthenium polypyridyl tris-heteroleptic compounds are being investigated as dye sensitizers, among other compounds, and have been recently reviewed.44 de Souza, J. S.; de Andrade, L. O. M.; Polo, A. S. In Nanoenergy; de Souza, F. L.; Leite, E. R., eds.; Springer: Heidelberg, 2013, p. 49. These complexes usually contain a bipyridine ligand having carboxylic acid groups, which are responsible for its chemical attachment to the TiO2 surface, and isothiocyanate ligands are responsible to tune the t2g energy levels of the complex.1313 Li, G.; Hu, K.; Robson, K. C. D.; Gorelsky, S. I.; Meyer, G. J.; Berlinguette, C. P.; Shatruk, M.; Chem. Eur. J.2015, 21, 2173.,1717 Nazeeruddin, M. K.; Grätzel, M.; J. Photochem. Photobiol., A2001, 145, 79. The two remaining coordination sites can be used to coordinate other ligands, with an aim to improve the light absorption or reduction of electron recombination processes. The main compounds that have been investigated are those having bipyridine derivatives, and only a few papers have reported the use of phenanthroline and their derivatives for this purpose. The similarity of phenanthroline to the bipyridyl ligand, coupled with its extended π-conjugated structure, enabled phenanthroline derivatives to be employed in the preparation of dye-sensitizers.1818 Hara, K.; Sugihara, H.; Tachibana, Y.; Islam, A.; Yanagida, M.; Sayama, K.; Arakawa, H.; Fujihashi, G.; Horiguchi, T.; Kinoshita, T.; Langmuir2001, 17, 5992. The first compound having 1,10-phenanthroline as an ancillary ligand developed for DSSCs demonstrated its potential as a new class of sensitizers.1919 Onozawa-Komatsuzaki, N.; Kitao, O.; Yanagida, M.; Himeda, Y.; Sugihara, H.; Kasuga, K.; New J. Chem.2006, 30, 689. Aiming to improve the performance of this class of compounds, the ancillary ligand was changed to 5,6-dimethyl-1,10-phenanthroline, which exhibited a lower conversion efficiency.2020 Reynal, A.; Forneli, A.; Martinez-Ferrero, E.; Sanchez-Diaz, A.; Vidal-Ferran, A.; Palomares, E.; Eur. J. Inorg. Chem.2008, 1955. Subsequently, this lower efficiency was ascribed to the compound's interfacial electron recombination processes.2121 Reynal, A.; Forneli, A.; Martinez-Ferrero, E.; Sánchez-Díaz, A.; Vidal-Ferran, A.; O'Regan, B. C.; Palomares, E.; J. Am. Chem. Soc.2008, 130, 13558. The use of 4,7-diphenyl-1,10-phenanthroline resulted in a complex capable of performing the solar-to-electricity conversion better than the standard compound, (TBA)2cis-[Ru(dcbH)2(NCS)2], N719.1010 Sun, Y. L.; Onicha, A. C.; Myahkostupov, M.; Castellano, F. N.; ACS Appl. Mater. Interfaces2010, 2, 2039.
A possible way to enhance the solar-to-electrical energy conversion is through the use of electron donating groups.2222 Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145.,2323 Beley, M.; Gros, P. C.; Organometallics2014, 33, 4590. In a previous work, we investigated the effect of electron donating (i.e., methyl) or withdrawing (i.e., phenyl) substituents on the 4 and 7 positions of 1,10-phenanthroline.2222 Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145. In this work, the synthesis and characterization of the new dye cis-[Ru(Me4-phen)(dcbH2)(NCS)2] (Me4-phen = 3,4,7,8-tetramethyl-1,10-phenanthroline; dcbH2 = 4,4'-dicarboxylic acid 2,2'-bipyridine) is described. In addition, the photoelectrochemical performance of this compound as a dye-sensitizer for solar cells is presented and compared with the performance of complexes that possess 4,7-dimethyl-1,10-phenanthroline (Me2-phen) and 1,10-phenanthroline (phen), which enables us to evaluate the effect of methyl groups on the 3 and 8 positions of the 1,10-phenanthroline ligand.
Experimental
4,4'-Dicarboxylic acid-2,2'-bipyridine (Strem, 99%); [Ru(p-cymene)Cl2]2 (Strem, 98%); 3,4,7,8-tetramethyl-1,10-phenanthroline, Me4-phen (Aldrich, 98%); 4,7-dimethyl-1,10-phenanthroline, Me2-phen (Alfa Aesar, 98%); 1,10-phenanthroline, phen (Strem, 99%); methanolic solution of tetrabutylammonium hydroxide (Acros Organics); Sephadex LH20 (Aldrich); tetrabutylammonium hexafluorophosphate (TBAPF6) (Fluka, ≥ 99.0%); N, N'-dimethylformamide-d 7, (Aldrich); NaNCS (Merck); HCl (Fluka); HNO3 (Sigma-Aldrich); methanol (Synth); ethanol (Synth); N, N-dimethylformamide (DMF) (Synth); Ti-nanoxide T/SP ink (Solaronix); fluorine-doped tin oxide (FTO); conductive glass plates (TEC Glass-TEC 8, solar 2.3 mm thickness 2 × 2 cm); the low temperature sealant Surlyn (30 mm, Solaronix); Pt ink (Platisol, Solaronix); acetonitrile (Lichrosolv, Merck); and Iodolyte AN50-electrolyte (consisting of 0.05 mol L–1 of triodide, 0.1 mol L–1 of LiI, 0.5 mol L–1 of 1,2-dimethyl-3-propylimidazolium iodide and 0.5 mol L–1 of 4-tert-butylpyridine in acetonitrile, Solaronix) were used as received.
Methods
Nuclear magnetic resonance (NMR) spectra were recorded at 25.0 ºC on a DRX-500 Bruker Avance spectrometer at 500.13 MHz using DMF-d7 as the solvent. The residual DMF peaks were used as an internal standard. Fourier transform infrared (FTIR) spectra were recorded at 25.0 ºC in KBr pellets on a Bomem MB 100 spectrometer (with 4 cm–1 resolution). Electronic absorption spectra of the complexes fully protonated with HNO3 were recorded on an Agilent 8453 diode-array spectrophotometer using quartz cuvettes with a 1.000 cm path length. Uncorrected emission spectra were recorded on a Cary Eclipse spectrofluorimeter using quartz cuvettes with a 1.000 cm path length after the samples had been purged with argon. Cyclic voltammetry experiments were performed with a µautolab III potentiostat/galvanostat (Autolab) using a three electrode arrangement comprised of a glassy carbon, platinum and Ag wires as the working, auxiliary and pseudo-reference electrodes, respectively. TBAPF6 was used as the supporting electrolyte dissolved in acetonitrile. The ferrocene/ferrocenium pair was used as the internal standard. Potentials were reported versus the normal hydrogen electrode (NHE) using E1/2 (Fc/Fc+) = 0.67 V vs. NHE.2424 Crabtree, R. H.; Energy Production and Storage: Inorganic Chemical Strategies for a Warming World; Wiley: Singapore, 2013.
Fabrication of the dye-sensitized solar cells
A sandwich-type cell was assembled from a transparent photosensitive electrode, a platinum coated electrode and an I–/I3– based electrolyte. Titania films (0.6 × 0.6 cm22 Gratzel, M.; Inorg. Chem.2005, 44, 6841.) were obtained by the screen-printing technique using Ti-nanoxide T/SP ink on FTO conductive glass plates. First, the TiO2 film was dried at 150 ºC for 10 min and then heated under an air atmosphere at 450 ºC for 30 min. The thickness of the transparent TiO2 layer was measured at 8 µm. The film was then immersed overnight in a 0.5 mmol L–1 dye solution and a 5 mmol L–1 chenodeoxycholic acid solution in methanol/acetonitrile 1:1 (v:v). Then, the electrode was rinsed with solvent before assembly with the counter electrode. A thin Pt layer was used as the counter electrode, which was also prepared by screen-printing Pt ink onto the FTO coated glass substrate and then heated at 450 ºC for 30 min under an air atmosphere. The platinum counter electrode and the dye-adsorbed TiO2 electrode were assembled together by heating at 110 ºC a hot-melt film sandwiched between the two electrodes. Then, the Iodolyte AN50-electrolyte was filled between the two electrodes with a syringe. The reproducibility of the DSSC preparation was controlled by preparing three replicates and by performing various tests as described below.
Photoelectrochemical measurements
The spectral response was determined by measuring the wavelength dependence of the incident photon-to-current conversion efficiency (IPCE) using light from an Osram 300-W xenon lamp coupled to a Newport monochromator (Oriel Cornerstone 260). Photocurrents were measured under short circuit conditions (in DC mode) using a Newport 1936R instrument. Incident irradiance was measured with a 1 cm22 Gratzel, M.; Inorg. Chem.2005, 44, 6841. calibrated silicon photodiode. Current-voltage characteristics were determined by applying an external potential bias using a Radiometer PGP 201 potentiostat sweeping the potential with a scan rate of 10 mV s–1. The irradiation source was a Solaronix Luminox A lamp, which matches the AM 1.5 (100 mW cm–2) solar spectrum. Incident irradiance was measured with an ISO-Tech ISM410. The cell temperature was kept below 30 ºC. The data were averaged for three cells for each configuration.
Synthesis of cis-[Ru(Rn-phen)(dcbH2)(NCS)2]
The cis-[Ru(Me4-phen)(dcbH2)(NCS)2], cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and cis-[Ru(phen)(dcbH2)(NCS)2] complexes, Figure 1, were prepared by a one-pot procedure, as previously reported.2222 Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145. Briefly, the ruthenium p-cymene dimer, [Ru(p-cymene)Cl2]2, was added to N, N'-dimethylformamide (DMF) and 2 equivalents of Rn-phen were then added. The mixture was kept at 80 ºC for 2 h under an inert atmosphere. After this period, 2 equivalents of dcbH2 were added to the mixture, and the temperature was increased to 160 ºC. The mixture was kept at this temperature for 4 h. Finally, a 10-fold excess of NaNCS was added to the mixture, the temperature was decreased to 140 ºC and the reaction was kept under these conditions for 4 h, allowing it to proceed to completion. All reactions were monitored by UV-Vis spectrophotometry. To purify the compounds, the obtained solution was concentrated, washed and filtered with ultrapure H2O, diluted in methanol and deprotonated by using a basic methanolic solution, obtained by dilution of tetrabutylammonium hydroxide (1 mol L–1), and centrifuged to remove any residual particles. The solution was applied to a liquid column chromatography containing Sephadex LH-20 as the stationary phase and methanol as the eluent. The pure fraction was concentrated, precipitated by the addition of HNO3 and filtered. The solid was dried in a desiccator. Using this procedure, it was possible to synthesize cis-[Ru(Me4-phen)(dcbH2)(NCS)2] (yield 51%; anal. calcd. for C30H30N6O7RuS2: C, 47.93; H, 4.02; N, 11.18%. Found: C, 49.46; H, 4.33; N, 10.86%), cis-[Ru(Me2-phen)(dcbH2)(NCS)2] (yield 70%; anal. calcd. for C28H24N6O6RuS2: C, 46.47; H, 3.62; N, 11.61. Found: C, 48.71; H, 4.04; N, 11.47%) and cis-[Ru(phen)(dcbH2)(NCS)2] (yield 78%; anal. calcd. for C26H21N6O7RuS2: C, 44.83; H, 3.49; N, 12.31. Found: C, 44.95; H, 3.05; N, 12.10%).
Chemical structures of cis-[Ru(phen)(dcbH2)(NCS)2], cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and cis-[Ru(Me4-phen)(dcbH2)(NCS)2].
Results
FTIR spectroscopy
Typical signals of functional groups are observed in the FTIR spectrum for cis-[Ru(Me4-phen)(dcbH2)(NCS)2], Figure 2. The CH bond bending of the aromatic rings (1940-1915 cm–1 region), the methyl groups (1462, 1384 and 1367 cm–1) and the OH of the carboxylic acids (1425 and 1407 cm–1) can be observed. In addition to the signals described previously, it is important to note the νCO stretching of the carboxylic groups (1720 cm–1) and the νCN of the NCS- ligand (2109 and 768 cm–1).
FTIR spectrum of cis-[Ru(Me4-phen)(dcbH2)(NCS)2] in KBr. (* indicates the peak ascribed to the −NCS ligand at 768 cm−1).
The νCN(NCS) signals observed with FTIR are also a useful tool to verify the existence of NCS– linkage isomers. The existence of these peaks indicates the coordination of this ligand by the nitrogen atom, as is described for other compounds.2222 Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145. The typical peak of NCS– coordination through the sulfur atom can be typically observed at 2050 and 700 cm–1.1414 Nazeeruddin, M. K.; Kay, A.; Rodicio, I.; Humphry-Baker, R.; Müller, E.; Liska, P.; Vlachopoulos, N.; Grätzel, M.; J. Am. Chem. Soc.1993, 115, 6382. However, they are not observed in the present spectrum. Thus, it is possible to conclude that the isothiocyanate complex is the only isomer obtained after purification.
1H NMR spectroscopy
1H-1H COSY was used to assign the protons signals of cis-[Ru(Me4-phen)(dcbH2)(NCS)2] to the respective ligand, dcbH2 or Me4-phen, Figure 3. Because the protons were assigned, NMR spectroscopy allowed an evaluation for the electronic influence of the substituents on the chemical shifts and proton couplings determined by the 1H NMR spectrum, Table 1. The number of signals observed in the 1H spectrum is consistent with the cis configuration of the complex, which reduces its symmetry and results in non-equivalent protons.
Chemical shifts and proton couplings determined for cis-[Ru(Me4-phen)(dcbH2)(NCS)2] in DMF-d7 (500 MHz, T = 298 K)
The signals corresponding to the Me4-phen ligand are consistent with the proposed structure (Figure 1), exhibiting only one proton coupling between H5 and H6. For the H2 and H9 protons, a difference in their chemical shifts is observed relative to the values reported for cis-[Ru(Me2-phen)(dcbH2)(NCS)2]. The chemical shift values for cis-[Ru(Me4-phen)(dcbH2)(NCS)2] are 9.58 and 8.50 ppm, whereas the analogous values for cis-[Ru(phen)(dcbH2)(NCS)2] are 9.74 and 8.19 ppm.2222 Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145. These differences indicate an electronic influence of the methyl group on these protons.
Electrochemistry
Electrochemical parameters of the complexes cis-[Ru(Me4-phen)(dcbH2)(NCS)2], cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and cis-[Ru(phen)(dcbH2)(NCS)2] were determined by using cyclic voltammetry in acetonitrile, Figure 4.
Cyclic voltammograms of cis-[Ru(Me4-phen)(dcbH2)(NCS)2] (−), cis-[Ru(Me2-phen)(dcbH2)(NCS)2] (····) and cis-[Ru(phen)(dcbH2)(NCS)2] (·-·-) in acetonitrile (---) at 293 K (v = 100 mV s−1; [TBAPF6] = 0.1 mol L−1).
The cyclic voltammograms exhibit a quasi-reversible oxidation process for the ruthenium(II/III) wave for cis-[Ru(Me4-phen)(dcbH2)(NCS)2], cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and cis-[Ru(phen)(dcbH2)(NCS)2], having E1/2 = 0.98, 1.01 and 1.05 V vs. NHE, respectively. The E1/2 for cis-[Ru(phen)(dcbH2)(NCS)2] is in agreement with the value reported in the literature.1919 Onozawa-Komatsuzaki, N.; Kitao, O.; Yanagida, M.; Himeda, Y.; Sugihara, H.; Kasuga, K.; New J. Chem.2006, 30, 689.
Absorption spectrum
The electronic spectrum of cis-[Ru(Me4-phen)(dcbH2)(NCS)2] in acetonitrile, Figure 5, exhibits high energy absorption bands (up to 350 nm), which are ascribed to intraligand π-π* transitions of the Me4-phen and dcbH2 ligands. Absorption bands with maxima at 420 nm (1.3 × 104 L mol–1 cm-1) and at 535 nm (0.8 × 1044 de Souza, J. S.; de Andrade, L. O. M.; Polo, A. S. In Nanoenergy; de Souza, F. L.; Leite, E. R., eds.; Springer: Heidelberg, 2013, p. 49. L mol–1 cm–1) are observed in the visible region of the spectrum, which overlap the sunlight spectrum. The high molar absorptivities determined for this compound indicate the presence of MLCT transitions, as has been described in the literature for similar compounds.1010 Sun, Y. L.; Onicha, A. C.; Myahkostupov, M.; Castellano, F. N.; ACS Appl. Mater. Interfaces2010, 2, 2039.,2525 Adeloye, A. O.; Molecules2011, 16, 8353. The existence of these absorption bands increases the sunlight harvesting by this compound.
The features of the absorption spectrum, as well as the absorption maxima and molar absorptivity, are similar to the data reported for cis-[Ru(Me2-phen)(dcbH2)(NCS)2] (ε430nm = 1.3 × 104 L mol–1 cm–1) and cis-[Ru(phen)(dcbH2)(NCS)2] (ε420nm = 1.2 × 104 L mol–1 cm–1).2222 Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145.
Emission spectrum
The emission spectrum of cis-[Ru(Me4-phen)(dcbH2)(NCS)2] in acetonitrile, Figure 6, is broad and non-structured, exhibiting an intense emission maximum at 800 nm. The emission feature and its maximum are typical of a 3MLCT lowest lying excited state of ruthenium polypyridyl compounds.2626 Nazeeruddin, M. K.; Zakeeruddin, S. M.; Humphry-Baker, R.; Jirousek, M.; Liska, P.; Vlachopoulos, N.; Shklover, V.; Fischer, C. H.; Grätzel, M.; Inorg. Chem.1999, 38, 6298.
Emission spectrum of cis-[Ru(Me4-phen)(dcbH2)(NCS)2] in acetonitrile at T = 293 K (lex = 500 nm; v = 30 nm min−1).
The estimated HOMO-LUMO energy gap, E0-0, determined for the complexes is 1.81 eV for cis-[Ru(Me4-phen)(dcbH2)(NCS)2], 1.84 eV for cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and 1.92 eV for cis-[Ru(phen)(dcbH2)(NCS)2]. These values were determined at the onset of the optical emission spectrum. The excited state oxidation potentials, E(S+/S*), were calculated by using the equation E(S+/S*) = E1/2(S/S+) – E0-0,1010 Sun, Y. L.; Onicha, A. C.; Myahkostupov, M.; Castellano, F. N.; ACS Appl. Mater. Interfaces2010, 2, 2039. where E1/2(S/S+) is the ground state oxidation potential determined by cyclic voltammetry, Table 2.
Emission maxima wavelength, λem, estimated HOMO-LUMO energy gaps, E0-0, ground state oxidation potentials, E1/2(S+/S), and excited state oxidation potentials, E(S+/S*), for the compounds investigated
Photoelectrochemical measurements
The sensitization of TiO2 films was monitored up to 14 h by absorption changes on the visible region, Figure 7. These absorption changes occur due to the increase in dye loading, which is responsible for the sensitization, following the MLCT band of each dye along the time. It is important to notice the absence of shifts on the absorption maxima indicating that a dye monolayer was adsorbed onto TiO2. The amount of dye-loaded was evaluated by their desorption from the film after full loading, and are 9.0 × 10–8, 11 × 10–8 and 9.0 × 10–8 mol cm–2, respectively for cis-[Ru(Me4-phen)(dcbH2)(NCS)2], cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and cis-[Ru(dcbH)2(NCS)2]2– (N719), which was used as a standard for comparison.
Absorption spectra of TiO2 films being sensitized by cis-[Ru(Me4-phen)(dcbH2)(NCS)2] (a); or cis-[Ru(Me2-phen)(dcbH2)(NCS)2] (b). (Insets: absorption changes as a function of time).
Dye sensitized solar cells were assembled using TiO2 sensitized films and solar cells were characterized by photocurrent action spectra and current-voltage curves. The photocurrent action spectra establish a relationship between the photocurrent generated by the incident light at a determined wavelength and the light intensity, thus it is possible to access information of the efficiency of the dye at each wavelength. Additionally, important photoelectrochemical parameters from solar cells, such as open-circuit potential, VOC, short circuit current density, JSC, and the overall performance of the solar cell, η, can be determined by the current-voltage curves, which are accessed by exposing the DSSC to simulated solar irradiation.44 de Souza, J. S.; de Andrade, L. O. M.; Polo, A. S. In Nanoenergy; de Souza, F. L.; Leite, E. R., eds.; Springer: Heidelberg, 2013, p. 49.
The photocurrent action spectra of cis-[Ru(Me4-phen)(dcbH2)(NCS)2], cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and cis-[Ru(dcbH)2(NCS)2]2–, Figure 8, resemble the absorption spectra of the respective dye-sensitized TiO2 and show that these compounds are capable of harvesting the sunlight and converting it into electrical energy in the visible region of the spectrum.
Photocurrent action spectra of cis-[Ru(Me4-phen)(dcbH2) (NCS)2] (●), cis-[Ru(Me2-phen)(dcbH2)(NCS)2] (cis- [Ru(dcbH)2(NCS)2]2− () and ).
The spectral features of cis-[Ru(Me4-phen)(dcbH2)(NCS)2] and cis-[Ru(Me2-phen)(dcbH2)(NCS)2] are similar, and the spectra of both are different than the standard N719 in the 350-400 nm region. A lower efficiency can also be observed for the cis-[Ru(Me4-phen)(dcbH2)(NCS)2] dye relative to cis-[Ru(Me2-phen)(dcbH2)(NCS)2] for the entire spectrum. Dye-sensitized solar cells prepared by using these complexes are able to convert the sunlight into electricity, and their performances were evaluated by JV curves, Figure 9, and their photoelectrochemical parameters are listed in Table 3.
Photoelectrochemical parameters determined for cis-[Ru(Men-phen)(dcbH2)(NCS)2], n = 2 or 4 and for cis [Ru(dcbH)2(NCS)2]2−, N719
Current – voltage curves determined for cis-[Ru(Me4-phen) (dcbH2)(NCS)2] (−), cis-[Ru(Me2-phen)(dcbH2)(NCS)2] (····) and cis- [Ru(dcbH)2(NCS)2]2− (·-·-) under AM 1.5 irradiation (P = 100 mW cm−2) and for cis-[Ru(dcbH)2(NCS)2]2− in the dark (---).
As was expected on the basis of the photocurrent action spectra, a lower JSC is determined for cis-[Ru(Me4-phen)(dcbH2)(NCS)2] in comparison to cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and N719, resulting in the lowest overall efficiency determined for cis-[Ru(Me4-phen)(dcbH2)(NCS)2] by JV curves.
Discussion
The FTIR spectrum of the compound demonstrates the predominance of isothiocyanate because the typical peaks of the thiocyanate isomer are not observed. The presence of the linkage isomer coordinated by the sulfur atom exhibits a νSCN– at 2050 cm–1 and a resonance at 700 cm–1.1414 Nazeeruddin, M. K.; Kay, A.; Rodicio, I.; Humphry-Baker, R.; Müller, E.; Liska, P.; Vlachopoulos, N.; Grätzel, M.; J. Am. Chem. Soc.1993, 115, 6382. Additionally, the use of 1H NMR spectroscopy indicates the presence of only one isomer and confirms the existence of the cis-complexes. This is evident because the number of signals observed in the spectrum is consistent with the existence of non-equivalent protons for the cis-isomer. A comparison of the cis-[Ru(Me4-phen)(dcbH2)(NCS)2] FTIR data to those reported for cis-[Ru(Me2-phen)(dcbH2)(NCS)2]2222 Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145. indicates the electronic influence of the methyl groups at the 3 and 8 positions on the NCS– stretching mode (2109 cm–1), which is shifted by –8 cm–1 relative to cis-[Ru(Me2-phen)(dcbH2)(NCS)2]. This result indicates a reduction of the electronic density on the NCS– ligand.
Changes of the electronic density on the metal center also shift the redox potential of the ruthenium(II/III) process to lower potentials. A more pronounced shift was observed as the number of methyl groups increases, which suggests that the electronic density on the metal center has increased. Changes to the ruthenium(II/III) E1/2 value as a function of the nature of the phenanthroline substituents are described for several ruthenium compounds2727 Guttentag, M.; Rodenberg, A.; Bachmann, C.; Senn, A.; Hamm, P.; Alberto, R.; Dalton Trans.2013, 42, 334.
28 Lever, A. B. P.; Inorg. Chem.1990, 29, 1271.-2929 Nakada, A.; Koike, K.; Nakashima, T.; Morimoto, T.; Ishitani, O.; Inorg. Chem.2015, 54, 1800. and can be predicted by using ligand electrochemical parameters.3030 Fielder, S. S.; Osborne, M. C.; Lever, A. B. P.; Pietro, W. J.; J. Am. Chem. Soc.1995, 117, 6990.
The oxidation potentials of the excited states of cis-[Ru(Men-phen)(dcbH2)(NCS)2], n = 2 or 4, are more negative than the conduction band edge of TiO2 anatase (ECB = –0.4 V vs. NHE),10 and their ground state oxidation potentials are more positive than the I2–/I– (+0.93 V vs. NHE)3131 Boschloo, G.; Hagfeldt, A.; Acc. Chem. Res.2009, 42, 1819. redox pair, Figure 10. The energy of these components is adequate for their use in dye-sensitized solar cells because they permit the electron to move from the excited state of the complexes into the conduction band of TiO2. Thermodynamically, their subsequent regeneration by the redox pair is favorable.
Energy diagram for the dyes (1) cis-[Ru(Me4-phen)(dcbH2) (NCS)2]; (2) cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and (3) cis-[Ru(phen) (dcbH2)(NCS)2].
The number of methyl groups on 1,10-phenanthroline changes the electronic distribution of the excited state and has an impact on the electronic spectrum of cis-[Ru(Me4-phen)(dcbH2)(NCS)2], which resembles those determined for similar complexes.1010 Sun, Y. L.; Onicha, A. C.; Myahkostupov, M.; Castellano, F. N.; ACS Appl. Mater. Interfaces2010, 2, 2039.,1919 Onozawa-Komatsuzaki, N.; Kitao, O.; Yanagida, M.; Himeda, Y.; Sugihara, H.; Kasuga, K.; New J. Chem.2006, 30, 689.,2222 Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145. However, its molar absorptivity in the visible light region (450-600 nm) is lower than that observed for similar compounds where the solar spectral irradiance is at a maximum. Its emission spectrum exhibits a maximum at 800 nm, which is blue shifted by 5 nm relative to cis-[Ru(Me2-phen)(dcbH2)(NCS)2]. This result indicates a destabilization of the 33 Souza, S. S.; Patrocinio, A. O. T.; Quim. Nova2014, 37, 886.MLCT excited state and is responsible for the emission detected.
The photoelectrochemical performance of cis-[Ru(Me4-phen)(dcbH2)(NCS)2] reflects the changes to the ground and excited states. The presence of four methyl groups on 1,10-phenanthroline reduces its solar light harvesting capacity and destabilizes the 3MLCT excited state. Consequently, its performance is lower than that reported for cis-[Ru(Me2-phen)(dcbH2)(NCS)2] but is similar to cis-[Ru(phen)(dcbH2)(NCS)2].2222 Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145. Thus, the presence of four electron donating groups attached to phenanthroline does not improve the solar-to-electrical energy conversion. IPCE values determined for cis-[Ru(Me4-phen)(dcbH2)(NCS)2] are lower than those of cis-[Ru(Me2-phen)(dcbH2)(NCS)2] along the entire spectrum, which is consistent with its JV performance. The same trend is observed for the JSC values, as determined by JV curves, which is primarily responsible for the lower energy conversion efficiency of this compound.
The lower photocurrent determined for cis-[Ru(Me4-phen)(dcbH2)(NCS)2] relative to cis-[Ru(Me2-phen)(dcbH2)(NCS)2] can be ascribed to the lower solar light harvesting capacity of the former complex. The dye regeneration dynamics must also be considered to explain the differences observed on the overall cell efficiencies. Since the ground state redox potentials are not positive enough to access the I/I- (1.23 V vs. NHE), the regeneration mechanism is expected to proceed by I2–/I– pathway,3131 Boschloo, G.; Hagfeldt, A.; Acc. Chem. Res.2009, 42, 1819.,3232 da Silva, R.; Rego, L. G. C.; Freire, J. A.; Rodriguez, J.; Laria, D.; Batista, V. S.; J. Phys. Chem. C.2010, 114, 19433. Figure 10. The driving force of electron transfer from mediator to cis-[Ru(Me4-phen)(dcbH2)(NCS)2] is lower than to cis-[Ru(Me2-phen)(dcbH2)(NCS)2], indicating that the less favorable regeneration process reduces the cell efficiency. The lower efficiency observed can also be due to a higher recombination rate of the injected electron to the oxidized dye. This process reduces both the JSC and VOC values,3333 O'Regan, B. C.; López-Duarte, I.; Martínez-Díaz, M. V.; Forneli, A.; Albero, J.; Morandeira, A.; Palomares, E.; Torres, T.; Durrant, J. R.; J. Am. Chem. Soc.2008, 130, 2906.,3434 O'Regan, B. C.; Durrant, J. R.; Acc. Chem. Res.2009, 42, 1799. as was observed in this case. cis-[Ru(Me4-phen)(dcbH2)(NCS)2] exhibits a VOC value that is 10 mV lower than the same value for cis-[Ru(Me2-phen)(dcbH2)(NCS)2], indicating that the recombination process can also reduce the efficiency of energy conversion. If this is the case, the methyl groups at the 3 and 8 positions play an important role in the back electron transfer processes for dye-sensitized solar cells. In this respect, further investigations are being performed on the recombination processes.
Conclusions
The new cis-[Ru(Me4-phen)(dcbH2)(NCS)2] dye-sensitizer was prepared and characterized. Its characteristics were compared to cis-[Ru(Me2-phen)(dcbH2)(NCS)2] and cis-[Ru(phen)(dcbH2)(NCS)2] to evaluate the influence of methyl groups at the 3 and 8 positions of the phenanthroline ligand. This compound exhibits a wide overlap to the visible spectrum, it sensitizes the TiO2 film and it is able to convert the sunlight into electrical energy in dye-sensitized solar cells. The presence of the four methyl groups on 1,10-phenanthroline leads to changes in both the ground and excited states of the complex. Overall, this changes reduces the solar light harvesting capacity of the complex and destabilizes its 3MLCT excited state. Consequently, its efficiency as a sensitizer is lower than that reported for cis-[Ru(Me2-phen)(dcbH2)(NCS)2], which is consistent with the lower IPCE values along the entire spectrum and the JV performance. The lower photocurrent can be ascribed to the lower solar light harvesting capacity of cis-[Ru(Me4-phen)(dcbH2)(NCS)2], to dye regeneration dynamics or to a higher recombination rate of the injected electron to the oxidized dye, which is ascribed to a reduction of the JSC and VOC values, indicate that the methyl groups at the 3 and 8 positions play an important role in back electron transfer processes for dye-sensitized solar cells.
-
FAPESP has sponsored the publication of this article.
Acknowledgements
A. V. Müller and A. S. Polo are grateful to Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) for financial support (2013/25173-5 and 2015/00605-5). M. B. and P. C. G. are grateful for support from the Université de Lorraine and CNRS. IS2-SAS is also gratefully acknowledged for providing a grant to T. D.
References
-
1Reynal, A.; Palomares, E.; Eur. J. Inorg. Chem.2011, 4509.
-
2Gratzel, M.; Inorg. Chem.2005, 44, 6841.
-
3Souza, S. S.; Patrocinio, A. O. T.; Quim. Nova2014, 37, 886.
-
4de Souza, J. S.; de Andrade, L. O. M.; Polo, A. S. In Nanoenergy; de Souza, F. L.; Leite, E. R., eds.; Springer: Heidelberg, 2013, p. 49.
-
5Bignozzi, C. A.; Argazzi, R.; Boaretto, R.; Busatto, E.; Carli, S.; Ronconi, F.; Caramori, S.; Coord. Chem. Rev.2013, 257, 1472.
-
6Caramori, S.; Cristino, V.; Boaretto, R.; Argazzi, R.; Bignozzi, C. A.; Di Carlo, A.; Int. J. Photoenergy2010, 16.
-
7O'Regan, B. C.; Durrant, J. R.; Acc. Chem. Res.2009, 42, 1799.
-
8Ghosh, B.; Naskar, S.; Naskar, S.; Espinosa, A.; Hau, S. C. K.; Mak, T. C. W.; Sekiya, R.; Kuroda, R.; Chattopadhyay, S. K.; Polyhedron2014, 72, 115.
-
9Ludin, N. A.; Mahmoud, A.; Mohamad, A. B.; Kadhum, A. A. H.; Sopian, K.; Karim, N. S. A.; Renewable Sustainable Energy Rev.2014, 31, 386.
-
10Sun, Y. L.; Onicha, A. C.; Myahkostupov, M.; Castellano, F. N.; ACS Appl. Mater. Interfaces2010, 2, 2039.
-
11Siu, C. H.; Ho, C. L.; He, J.; Chen, T.; Majumda, P.; Zhao, J. Z.; Li, H.; Wong, W. Y.; Polyhedron2014, 82, 71.
-
12Urbani, M.; Medel, M.; Kumar, S. A.; Chandiran, A. K.; Gonzalez-Rodriguez, D.; Gratzel, M.; Nazeeruddin, M. K.; Torres, T.; Polyhedron2014, 82, 132.
-
13Li, G.; Hu, K.; Robson, K. C. D.; Gorelsky, S. I.; Meyer, G. J.; Berlinguette, C. P.; Shatruk, M.; Chem. Eur. J.2015, 21, 2173.
-
14Nazeeruddin, M. K.; Kay, A.; Rodicio, I.; Humphry-Baker, R.; Müller, E.; Liska, P.; Vlachopoulos, N.; Grätzel, M.; J. Am. Chem. Soc.1993, 115, 6382.
-
15Oregan, B.; Gratzel, M.; Nature1991, 353, 737.
-
16Zakeeruddin, S. M.; Nazeeruddin, M. K.; Humphry-Baker, R.; Pechy, P.; Quagliotto, P.; Barolo, C.; Viscardi, G.; Gratzel, M.; Langmuir2002, 18, 952.
-
17Nazeeruddin, M. K.; Grätzel, M.; J. Photochem. Photobiol., A2001, 145, 79.
-
18Hara, K.; Sugihara, H.; Tachibana, Y.; Islam, A.; Yanagida, M.; Sayama, K.; Arakawa, H.; Fujihashi, G.; Horiguchi, T.; Kinoshita, T.; Langmuir2001, 17, 5992.
-
19Onozawa-Komatsuzaki, N.; Kitao, O.; Yanagida, M.; Himeda, Y.; Sugihara, H.; Kasuga, K.; New J. Chem.2006, 30, 689.
-
20Reynal, A.; Forneli, A.; Martinez-Ferrero, E.; Sanchez-Diaz, A.; Vidal-Ferran, A.; Palomares, E.; Eur. J. Inorg. Chem.2008, 1955.
-
21Reynal, A.; Forneli, A.; Martinez-Ferrero, E.; Sánchez-Díaz, A.; Vidal-Ferran, A.; O'Regan, B. C.; Palomares, E.; J. Am. Chem. Soc.2008, 130, 13558.
-
22Carvalho, F.; Liandra-Salvador, E.; Bettanin, F.; Souza, J. S.; Homem-de-Mello, P.; Polo, A. S.; Inorg. Chim. Acta2014, 414, 145.
-
23Beley, M.; Gros, P. C.; Organometallics2014, 33, 4590.
-
24Crabtree, R. H.; Energy Production and Storage: Inorganic Chemical Strategies for a Warming World; Wiley: Singapore, 2013
-
25Adeloye, A. O.; Molecules2011, 16, 8353.
-
26Nazeeruddin, M. K.; Zakeeruddin, S. M.; Humphry-Baker, R.; Jirousek, M.; Liska, P.; Vlachopoulos, N.; Shklover, V.; Fischer, C. H.; Grätzel, M.; Inorg. Chem.1999, 38, 6298.
-
27Guttentag, M.; Rodenberg, A.; Bachmann, C.; Senn, A.; Hamm, P.; Alberto, R.; Dalton Trans.2013, 42, 334.
-
28Lever, A. B. P.; Inorg. Chem.1990, 29, 1271.
-
29Nakada, A.; Koike, K.; Nakashima, T.; Morimoto, T.; Ishitani, O.; Inorg. Chem.2015, 54, 1800.
-
30Fielder, S. S.; Osborne, M. C.; Lever, A. B. P.; Pietro, W. J.; J. Am. Chem. Soc.1995, 117, 6990.
-
31Boschloo, G.; Hagfeldt, A.; Acc. Chem. Res.2009, 42, 1819.
-
32da Silva, R.; Rego, L. G. C.; Freire, J. A.; Rodriguez, J.; Laria, D.; Batista, V. S.; J. Phys. Chem. C.2010, 114, 19433.
-
33O'Regan, B. C.; López-Duarte, I.; Martínez-Díaz, M. V.; Forneli, A.; Albero, J.; Morandeira, A.; Palomares, E.; Torres, T.; Durrant, J. R.; J. Am. Chem. Soc.2008, 130, 2906.
-
34O'Regan, B. C.; Durrant, J. R.; Acc. Chem. Res.2009, 42, 1799.
Publication Dates
-
Publication in this collection
Nov 2015
History
-
Received
24 June 2015 -
Accepted
21 Aug 2015