Soil tillage systems and the crop residue management are essential for the sustainability of cassava production in sandy and sandy loam soils of Northwestern Paraná State, Southern Brazil. The objective of this study was to evaluate the effects of different tillage systems used for planting cassava: no-tillage (NT), minimum tillage using chiseling (MT) and conventional tillage with moldboard plow and disking (CT) on some physical properties of a dystrophic Red Latosol. The following soil physical properties were evaluated in the 0-0.15 m and 0.15-0.30 m soil layers: soil bulk density (BD), soil water retention curve, soil resistance to penetration curve and least limiting water range (LLWR). Higher values of BD and soil resistance to penetration were verified in the NT and MT treatments. The soil water retention curve was only influenced by BD, which incorporated the effects of the soil tillage systems independent of sampled layers. The soil resistance curve to penetration was influenced by tillage systems and layers, indicating that the soil resistance to root penetration was higher in NT > MT > CT, and was accentuated at the 0.15-0.30 m depth. The increase in the BD led to a reduction in the LLWR due to the effects of soil resistance to penetration and air-filled porosity, which in turn determined the range of soil available water. Results indicated that LLWR value followed the sequence: PC = PM > PSR in the 0-0.15 m soil layer, and was not influenced by tillage systems in the 0.15-0.30 soil layer The critical bulk density value (BDc), the BD value at which LLWR = 0, was lower in NT and MT tillage systems compared with CT, therefore resulting in a smaller frequency of higher BD values than BDc in the soil under CT.
soil bulk density; soil physical quality; soil water retention; least limiting water range; soil resistance to penetration
