Acessibilidade / Reportar erro

Surface treatments aimed at improving the adhesion between plaster and bamboo slivers

The gypsum is a binder with applications primarily in the manufacture of ceiling tile, decorative elements and partition walls. However, using a low water/plaster ratio and procedures such as vibration, it is possible to obtain mechanical strength compatible to other applications in construction as in the case of structural elements. The research reported in this study aimed to evaluate experimentally the possibility of improving the compound studied. Treatments were carried out to reduce water absorption by slivers through the use of plant extract B Carbon, polymer resin, and tar. In an attempt to improve the adhesion at the interface plaster/epoxy adhesive, bamboo, plastic and tar mass were used. Test specimens were made of plaster reinforced with slivers of bamboo, treated with different products, to assess its efficiency in mechanical tests. It was observed that to obtain a good adhesion at the interface of the composite it is necessary to apply additional treatments that reduce the effects of dimensional instability.

water absorption; dimensional instability; composite


Unidade Acadêmica de Engenharia Agrícola Unidade Acadêmica de Engenharia Agrícola, UFCG, Av. Aprígio Veloso 882, Bodocongó, Bloco CM, 1º andar, CEP 58429-140, Campina Grande, PB, Brasil, Tel. +55 83 2101 1056 - Campina Grande - PB - Brazil
E-mail: revistagriambi@gmail.com