Race/FKG (1999) |
Shaping/Rotary centric |
Triangular with alternating cutting edges along the instrument |
|
Micromilling, Electropolishing |
IRace (2011) |
10–60 |
BioRace (2012) |
.02, .04, .06 |
Series ISO 10 (2010) |
Glide path/Rotary centric |
Quadrangular |
10 |
.02, .04, .06 |
Scout Race (2014) |
Glide path/Rotary centric |
Quadrangular |
10, 15, 20 |
.02 |
BT Race (2014) |
Shaping/Rotary centric |
Triangular with alternating cutting edges along the instrument |
BT1 – 10.06 |
BT2 – 35.00 |
BT3 – 35.04 |
BT4 – 40.04 |
BT5 – 40.04 |
K3/Sybron Endo (2001) |
Shaping/Rotary centric |
Triple-fluted, Positive rake angle with asymmetric radial lands |
15–60 |
Micromilling |
K3XF (2011) |
|
.04, .06 |
Micromilling, R-Phase |
Mtwo/VDW (2003) |
Shaping/Rotary centric |
S-shaped with two active cutting edges |
10–60 |
Micromilling |
.04, .05, .06, .07 |
ProTaper Universal/Dentsply-Sirona (2006) |
Shaping/Rotary centric |
Convex triangular |
Regressive taper 17–50 |
Micromilling |
ProTaper Gold (2013) |
Variable and progressive tapers along the instrument |
Micromilling, post-manufacture heat treatment |
ProTaper Next (2013) |
Shaping/Rotary centric |
Rectangular eccentric |
Variable taper 17-50 |
Micromilling, Pre-manufacture heat treatment: M-wire |
.04, .06, .07 |
Twisted File/Sybron Endo (2008) |
Shaping/Rotary centric |
Triangular |
10–40 |
Twisted under heat, R-Phase, Electropolished |
.04, .06, .08, .10, .12 |
Twisted File Adaptive (2013) |
Shaping/Adaptive |
Triangular |
SM – small
|
25/.04, 25/.06, 35/.04 |
ML – medium large
|
25/.08, 30/.06, 50/.04 |
EndoSequence/Brassler (2009) |
Shaping/Rotary centric |
Triangular, with alternating contact points along the instrument |
15–60 |
Micromilling, Electropolished |
.04 e .06 |
Profile Vortex/Dentsply Sirona (2009) |
Shaping/Rotary centric |
Convex triangular |
15–50 .04, .06. |
Micromilling, Pre-manufacture heat treatment: M-wire |
Vortex Blue (2012) |
Micromilling, pre and postmanufacture hea treatment:Blue |
SAF/ReDent (2010) |
Shaping/Vertical vibration |
Hollow |
1.5 mm |
Laser cutting |
2.0 mm |
Hyflex CM/Coltene (2011) |
Shaping/Rotary centric |
Double fluted Hedström design with positive rake ange |
15–40 |
Micromilling, Post-manufacture heat treatment: CM |
Hyflex EDM (2016) |
.04, .06, .08 |
Electrodischarge Machining, post-manufacture heat-treatment: CM-EDM |
Reciproc/VDW (2011) |
Shaping/Reciprocating |
“S-shaped” Single File technique |
Variable taper R25 (25/0.08) R40 (40/0.06) R50 (50/0.05) |
Micromilling, pre-manufacture heat-treatment: M-wire |
Reciproc Blue (2016) |
Micromilling, pre and postmanufacture hea-treatment: Blue |
R-Pilot (2017) |
Glide oath/Reciprocating |
S-shaped |
Variable taper 12.5/0.04 |
Micromilling, pre and postmanufacture hea treatment: Blue |
Pathfile/Dentsply-Sirona (2011) |
Glide-path/Rotary centric |
Quadrangular |
13, 16, 19 |
Micromilling |
.02 |
Typhoon/Clinician's Choice (2011) |
Shaping/Rotary centric |
Convex triangular |
20 – 35 |
Micromilling, pre and postmanufacture hea treatment: CM |
.04, .06 |
Wave One/Dentsply-Sirona (2011) |
Shaping/Reciprocating |
Modified convex triangular (apical) Convex triangular (coronal) |
Variable taper |
Micromilling, pre-manufacture heat-treatment: M-wire |
Small (21/0.06) |
Primary (25/0.08) |
Large (40/0.08) |
Wave One Gold (2015) |
Paralleogram |
Variable taper |
Micromilling, post-manufacture heat treatment |
Small (20/.07) |
Primary (25/.07) |
Medium (35/.06) |
Large (45/.05) |
Wave One Glider (2017) |
Glide path/Reciprocating |
Variable taper |
15/.02 |
Proglider/Dentsply-Sirona (2014) |
Glide-path/Rotary centric |
Quadrangular |
Variable Taper |
Micromilling, pre-manufacture heat-treatment: M-wire |
16/.02 |
ProDesign Logic/Easy (2014) |
Shaping/Rotary centric |
Triangular |
25/50 |
|
.03, .05. 06 |
Micromilling, post-manufacture heat treatment: CM |
ProDesign Logic Glide-Path/Easy (2014) |
Glide-path/Rotary centric |
Quadrangular |
25-50 |
.01 |
ProDesign R/Easy (2014) |
Shaping/Reciprocating |
Double Helix |
Single File |
25/.08 |
TRUShape/Dentsply-Sirona (2015) |
Shaping/Rotary eccentric |
Triangular |
Variable regressive .06v. |
Micomilling, Shape-setting, Heat-treatment |
S-curve in the instrument's longitudinal axis |
20–40 |
XP-endo Shaper/FKG Dentaire (2015) |
Shaping/Rotary eccentric |
Triangular Booster Tip |
Single file |
Micomilling, Shape-setting, Heat-treatment |
15 – 30 |
.01 - minimum .04 |
Genius/Ultradent (2016) |
Shaping/Rotary and reciprocating centric |
S-shaped |
25-50 |
Micromilling, heat treatment |
.04 |
Sequence Rotary File/MK life (2017) |
Shaping/Rotary Centric |
Triangular |
15 – 35 |
Micromilling, post-manufacture heat treatment |
.04, .06 |
X1 Blue/MK life (2017) |
Shaping/Reciprocating |
Single file |
20, 25, 40 |
.06 |
Typhoon/Clinician's Choice (2011) |
Shaping/Rotary tentric |
Convex triangular |
20 – 35 |
Micromilling, post-manufacture heat treatment: CM |
.04, .06 |