Synthesis of novel quinolines using TsOH/ionic liquid under microwave

Abstracts

In this work, 3-haloacetyl-4-methylquinolines were synthesized from the reaction of 4-alkoxy-3-alken-2-ones [R¹C(O)CH=C(R²)OCH3, where R¹ = CF3, CCl3, CHCl2, CF2Cl, CF2CF3 and R² = Me, Et, Pr, Bu, i-Bu and i-Pe] and 2-aminoacetophenone. The reaction was performed in ionic liquid and 4-toluene sulfonic acid under microwave irradiation. Results showed that the catalytic method was effective. Products were formed in a short time (10-20 min) and presented good yields (70-91%).

ionic liquid; quinoline; toluene sulfonic acid; microwave-assisted synthesis (MW); enones

Neste trabalho, 3-haloacetil-4-metilquinolinas foram sintetizadas a partir da reação de 4-alcóxi-3-alquen-2-onas [R¹C(O)CH=C(R²)OCH3, onde R¹ = CF3, CCl3, CHCl2, CF2Cl e CF2CF3 e R² = Me, Et, Pr, Bu, i-Bu e i-Pe] e 2-aminoacetofenona. A reação foi realizada em líquido iônico e ácido 4-toluenosolfônico sob irradiação de micro-ondas. Os resultados mostraram que o método catalítico foi efetivo e os produtos foram formados em tempos de reação curtos (10-20 min) e com bons rendimentos (70-91%).

Synthesis of novel quinolines using TsOH/ionic liquid under microwave

Liziê D. T. Prola; Lilian Buriol; Clarissa P. Frizzo; Guilherme S. Caleffi; Mara R. B. Marzari; Dayse N. Moreira; Helio G. Bonacorso; Nilo Zanatta; Marcos A. P. Martins^*

Núcleo de Química de Heterociclos (NUQUIMHE), Departamento de Química, Universidade Federal de Santa Maria (UFSM), 97105-900 Santa Maria-RS, Brazil

ABSTRACT

In this work, 3-haloacetyl-4-methylquinolines were synthesized from the reaction of 4-alkoxy-3-alken-2-ones [R¹C(O)CH=C(R²)OCH₃, where R¹ = CF₃, CCl₃, CHCl₂, CF₂Cl, CF₂CF₃ and R² = Me, Et, Pr, Bu, i-Bu and i-Pe] and 2-aminoacetophenone. The reaction was performed in ionic liquid and 4-toluene sulfonic acid under microwave irradiation. Results showed that the catalytic method was effective. Products were formed in a short time (10-20 min) and presented good yields (70-91%).

Keywords: ionic liquid, quinoline, toluene sulfonic acid, microwave-assisted synthesis (MW), enones

RESUMO

Neste trabalho, 3-haloacetil-4-metilquinolinas foram sintetizadas a partir da reação de 4-alcóxi-3-alquen-2-onas [R¹C(O)CH=C(R²)OCH₃, onde R¹ = CF₃, CCl₃, CHCl₂, CF₂Cl e CF₂CF₃ e R² = Me, Et, Pr, Bu, i-Bu e i-Pe] e 2-aminoacetofenona. A reação foi realizada em líquido iônico e ácido 4-toluenosolfônico sob irradiação de micro-ondas. Os resultados mostraram que o método catalítico foi efetivo e os produtos foram formados em tempos de reação curtos (10-20 min) e com bons rendimentos (70-91%).

Introduction

Quinolines are very important heterocyclic compounds since they display interesting physiological and pharmacological activities. The quinoline moiety is present as a substructure in a broad range of pharmacologically active compounds, most notably in anti-malaria agents.¹ This nucleus has also played a historical role in organic chemistry as a target for structural determination and total synthesis.^2-5

The most described synthetic route to quinolines is known as Friedländer annulations.^6,7 In this reaction, substituted anilines or 2-carbonyl-substituted anilines (C-C-C-N unit) react with carbonyl compounds containing a reactive α-methylene group (C-C unity). Generally, the reactive α-methylene group is part of unsymmetrical ketones,⁸ 1,3-dicarbonyl compounds⁹ or β-ketoesters.^10-12 Quinolines from these precursors present a 3-acyl group such as acetyl, benzoyl, thienyl, furyl, carboxylate and trifluoroacetyl.⁹ However, quinolines with electron-withdrawing groups such as perfluoroalkyl, trichloromethyl and dichloromethyl groups attached at 3-position cannot be obtained from unsymmetrical ketones,⁸ 1,3-dicarbonyl compounds⁹ or β-ketoesters due to the difficulty to obtain the precursors.

Our research group has developed a general procedure to prepare 4-alkoxyvinyl ketones and has exhaustively studied the versatility of these precursors in heterocyclic synthesis.^13-20 In 2008, our group described the synthesis of a set of trifluoromethyl-cycloalka[b]quinolines from reactions of mono-substituted anilines and 2-trifluoroacetyl-1-methoxycycloalkenes using poly-phosphoric acid (PPA).²¹ In this synthesis, it was explored the well-known reactivity of 1,3-dielectrophilic of 4-alkoxyvinyl ketones. In the present work, continuing our studies on the reactivity of 4-alkoxyvinyl ketones in heterocyclic synthesis, we proposed a novel route for the synthesis of quinolines. We believe that the reaction of 4-alkoxyvinylhalomethyl ketone precursors with 2-carbonyl-substituted anilines can furnish quinolines with perfluoroalkyl, trichloromethyl and dichloromethyl groups attached at 3-position. For this reaction route to work, 4-alkoxyvinylhalomethyl ketones should react at the electrophilic center (at carbonyl) and in the nucleophilic site (Cα C=O).

In addition, unconventional activation techniques such as microwave^22,23 and ultrasound²⁴ have also been used in organic reactions as a way of reducing reaction times, and of increasing product yields when compared to conventional methods.²⁵ A recent trend in this area is microwave-assisted synthesis using ionic liquids (ILs) as solvent, co-solvent, catalyst, and/or template.²⁶ Due to their ionic nature, ILs allow highly effective interactions with microwave (MW) energy for the rapid generation of products with high yields.²⁷ Thus, here it is also investigated the synthesis of quinolines from 4-alkoxyvinylhalomethyl ketones in the presence of 1H-methylimidazolium toluene sulfonate [HMIM][TsO] as a BrØnsted acidic ionic liquid and under microwave irradiation since our previous works have shown that ILs^15,16 and/or ILs/microwave (MW)¹⁷ are efficient in heterocyclic synthesis.

Experimental

General

Unless otherwise indicated, all common reagents and solvents were used as obtained from commercial suppliers without further purification. ¹H NMR (nuclear magnetic resonance) spectra were recorded on a Bruker DPX-200 (¹H at 200 MHz) and ¹³C NMR on a Bruker DPX 400 (¹H at 400.13 MHz and ¹³C at 100.62 MHz) in 5 mm tubes, in CDCl₃/TMS solutions at 298 K. The general reproducibility of chemical shift data was estimated to be better than ± 0.01 ppm. All spectra were acquired in a 5 mm tube, at natural abundance. J values are given in Hz. Mass spectra (MS) were registered in a HP 5973 MSD connected to an HP 6890 GC and interfaced by a Pentium PC. The gas chromatographer (GC) was equipped with a split-splitless injector, cross-linked to a HP-5 capillary column (30 m, 0.32 mm of internal diameter), and helium was used as the carrier gas. The melting points (mp) were measured using a Microquímica MQAPF 301 Model. Experiments were performed in a Discover CEM MW using the simultaneous cooling mode of operation. X-ray diffraction measurements were carried out by graphite monochromatized Mo K_α radiation with k = 0.71073 Å on a Bruker SMART CCD diffractometer.²⁸ Structures were solved with direct methods using the SHELXS-97 program and refined on F² by full-matrix least-squares using SHELXL97.²⁹ The absorption correction was performed by Gaussian methods.³⁰Figure 1 depicts the ORTEP view,³¹ a diagram of the molecule indicating the atom numbering scheme with thermal ellipsoids at 30% probability. Aminoacetophenone was commercially available. 4-Alkoxy-3-alken-2-ones were obtained from the acylation reaction of enol ether or acetal with respective acylant, in accordance with the methodology developed in our laboratory.²⁰ The ionic liquid [HMIM][TsO] was prepared according to procedures from the literature.³²

Typical procedure for the synthesis of quinolines in MW

A 10 mL microwave vessel equipped with a standard cap (vessel commercially furnished by CEM Discover) was filled with 4-alkoxyvinyl ketone (1.2 mmol for products 3a-f, 8a, 10a, 11a, and 1.0 mmol for 9a), 2-aminoacetophenone (1.0 mmol), [HMIM][TsO] (1.0 mmol) and TsOH (1.0 mmol). After the vessel was sealed, the sample was irradiated at 150 °C for 3a-f, 10a, 11a, 90 °C for 8a and 80 °C for 9a for the time indicated in Scheme 1. Reaction conditions were plotted in Synergies version 3.5.9 software, applying the power of 200 W as the maximum level of irradiation and a maximum level of internal vessel pressure of 250 psi. The irradiation power was in the range of 4-10 W for reactions at 150 °C, without simultaneous cooling, 10-13 W for reactions at 90 °C, and 15-51 W for reactions at 80 °C with simultaneous cooling. The reaction mixture was subsequently cooled to 50 °C by compressed air. The reaction mixture was isolated with chloroform (5 mL) and washed with water (3 × 5 mL). The chloroform was evaporated under vacuum (reduced pressure) and the products were obtained in a pure form without further purification. The structure of the compounds was confirmed by ¹H/¹³C NMR spectroscopy, mass spectrometry and elemental analysis.

Procedure for the synthesis of quinolone 3a in conventional thermal heating

4-Alkoxyvinyl ketone 1 (1.2 mmol), acetophenone 2 (1.0 mmol), [HMIM][TsO] (1.0 mmol) and TsOH (1.0 mmol) were placed into a round-bottom flask equipped with a stir bar. The mixture was stirred for 10, 20, 60 and 120 min at 150°C. Products were isolated with chloroform (5 mL) and washed with water (3 × 5 mL). The chloroform was evaporated under vacuum (reduced pressure) and products were obtained in a pure form without further purification.

Results and Discussion

To understand the influence of different variables in this reaction, several components were studied to optimize our procedure. Firstly, it was carried out the reaction using 4-alkoxyvinyl ketones 1 and 2-aminoacetophenone 2 to obtain the quinoline 3 under microwave irradiation in 20 min (Table 1). In a first set of experiments, it was studied the influence of different reaction media, using HCl as catalyst. The desired product was obtained in moderate yields for all the media, where [HMIM][TsO] and [BMIM][BF₄] were the best for this reaction (Table 1, entry 5). In order to increase the yields, it was evaluated the use of 4-toluenesulfonic acid (TsOH) as catalyst. The efficiency of the IL-acid combination to promote the reaction was examined (Table 1). It was found that variation of the acid had an effective influence. While hydrochloric acid afforded the desired product in moderate yields (entries 1, 3 and 5) or did not result in the complete conversion of the reagent into the product (entry 3), TsOH promoted the total conversion of reactants and afforded good yields in ionic liquids (entry 4 and 6) and moderate yields in ethanol (entry 2). With these results, TsOH was selected as the best catalyst.

Reaction time was also analyzed. The reaction time using [BMIM][BF₄] was reduced to 10 min, resulting in a mixture containing the product and 3% of 2. This indicates the incomplete conversion of reactants into products. Therefore, the variation of the reaction time was studied using ionic liquid [HMIM][TsO] (Table 2), in which the best yield was obtained in 10 min, with a reduction in yield at shorter (5 min) and longer (20 min) reaction times (Table 2).

In order to gain insight into the generality of this reaction, a catalytic cyclocondensation reaction was performed on several other 4-alkoxyvinyl ketones using the established reaction conditions. Thus, other quinolines were prepared, varying the substituent at 2- and 3-positions of the quinolinic ring. 4-Alkoxyvinyl ketones 1a-f, 4a, 5a, 6a and 7a (Scheme 1) were obtained from the acylation reaction of enol ether or acetal with trifluoroacetic anhydride (1a-f), trichloroacetyl chloride (4a), dichloroacetyl chloride (5a), chlorodifluoroacetic anhydride (6a) and perfluoropropionic anhydride (7a), respectively, in accordance with the methodology developed in our laboratory.^13-20 Different 4-alkyl- and 4-aryl-4-alkoxyvinyl ketones were used in the reaction. While 4-aryl-4-methoxy-3-alken-2-ones were not completely converted into quinolines 3, reactions with 4-alkyl-4-alkoxyvinyl ketones resulted in total conversion into products in good yields (Scheme 1). Therefore, it was decided to change the substituent at the 1- position of 4-alkoxyvinyl ketones to obtain new quinolines in good yields (Scheme 1). Quinolines were isolated from extraction with chloroform and washed with water. The ionic liquid was recovered by the evaporation of water and successive washing with dichloromethane. After the evaporation of the solvent, the ionic liquid was reused without any loss of activity. The isolated yields of products 3a-f, 8-11a are summarized in Scheme 1.

To show the importance of MW to promote quinoline synthesis, the reaction of 4-alkoxyvinyl ketone 1 (1.2 equiv) and 2-aminoacetophenone (1 equiv) 2 was carried out under conventional thermal heating using [HMIM][TsO]. Times and temperatures previously established were used (Table 2). It was found that at 10 min, the yield of the product was lower (59%) than that obtained in MW (86%). Subsequently, the reaction time was increased to 20 min and the yield was very similar to that obtained in 10 min (60%). Only after 60 min (83%) and 120 min (85%) under conventional thermal heating, the product was obtained in yields similar to those obtained in MW.

In accordance with Martínez-Palou,²⁷ the synergic effects of ionic liquid and MW in promoting this reaction are due to the ionic and polar nature of ILs, which allow for highly effective interactions with microwave (MW) energy, generating products in short times and with high yields.

Products were characterized by ¹H, ¹³C NMR spectroscopy, mass spectrometry and melting points for solid products. Quinolines 3a-f, 8a-11a showed a set of ¹H and ¹³C NMR data that corresponded to the proposed structures. Compounds 3a-f, 9a, 10a and 11b showed ¹H NMR chemical shifts of the methyl protons (CH_3, H9) as a singlet at δ 2.61, and compound 8a showed a shift of the methyl protons (CH₃, H9) as singlet at δ 2.81. The same compounds presented ¹³C NMR spectra with chemical shifts typical of quinoline rings in the ranges of δ 152.6-157.8 (C-2), 142.7-143.5 (C-3) and 146.2-147.9 (C-4).

Although the features of the Friedländer reaction are generally well understood, its mechanism has not been clearly established. Experimental reports support two different mechanistic proposals. Starting from 2-carbonyl-substituted aniline and the carbonyl partner, one pathway involves the initial formation of the Schiff base followed by an intramolecular aldol reaction to give the hydroxy imine, followed by loss of water to produce the quinoline. Alternatively, it has been proposed that the initial rate-limiting step is an intermolecular aldol reaction furnishing the quinoline.⁷ However, regarding the substrate, it has been studying here, another mechanism seems to be operating, where the reaction is likely to occur by the initial formation of an enamino intermediate (IIa-IIb). This can be evidenced by the fact that during the optimization steps of reaction, it was occasionally isolated the enamino ketone intermediate. Therefore, the reaction involved an initial C-N bond formation, from the attack of the nitrogen atom of the NH₂ group on the β-carbon of the 4-alkoxyvinyl ketones 1 with subsequent substitution of the alkoxy group to furnish the enamino ketone intermediate (IIa-IIb). In a second moment, there was an intramolecular nucleophilic addition of the α-carbon to the carbonyl group of the 2-aminoacetophenone with subsequent elimination of one molecule of water (III) (Scheme 2).³³ We suggest that the combination of [HMIM][TsO] and TsOH improved the catalytic effect in the second attack for the formation of the final product.¹⁵

The mechanism proposed here results in the same regioisomer as that which is formed in the other two proposed mechanisms.⁷ The X-ray structure of the compound 3c (Figure 1) supports the mechanism suggested for this reaction.

Conclusions

In summary, the method proposed in this study allows the preparation of a set of novel 3-haloacylquinolines from 4-alkoxyvinyl ketones and 2-aminoacetophenone, exploring the reactivity of 4-alkoxyvinyl ketones, i.e., their electrophilic and nucleophilic sites. In addition, it was demonstrated the synergic effects of ionic liquids and microwave in the synthesis of quinolines, resulting in reactions performed in short times and providing good yields.

Acknowledgements

The authors thank the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, Universal/Proc. 485893/2007-0, Universal/Proc. 471519/2009-0 and MAPA/Proc. 578426/2008-0) and the Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul (FAPERGS, PRONEX/Proc. 10/0037-8) for financial support. Fellowships from CNPq (M. A. P. M., N. Z., H. G. B., D. N. M., M. R. B. M. and L. D. T. P.), CAPES (C. P. F., PRODOC-CAPES/Proc. 2684-32/2010, L.B.) and FAPERGS are also acknowledged.

Supplementary Information

Supplementary information (spectral data of compounds) is available free of charge at http://jbcs.sbq.org.br as PDF file.

References

1. Wiesner, J.; Ortmann, R.; Jomaa, H.; Schlitzer, M.; Angew. Chem., Int. Ed. 2003, 42, 5274.

2. Tumer, R. R.; Woodward, R. R.; The Alkaloids; R. H. F. Manske ed.; Academic Press: New York, 1953.

3. Stork, G.; Niu, D.; Fujimoto, A.; Koft, E. R.; Balkovec, J.; Tata, J. R.; Dake, G. R.; J. Am. Chem. Soc. 2001, 123, 3239.

4. Raheem, I.T.; Goodman, S. N.; Jacobsen, E. N.; J. Am. Chem. Soc. 2004, 126, 706.

5. Balasubramanian, M.; Keay, J. G.; Comprehensive Heterocyclic Chemistry II, Katritzky, A. R.; Rees C. W., eds.; Pergamon Press: New York, 1996.

6. Kouznetsov, V. V.; Méndez, L. Y. V.; Gómez, C. M. M.; Curr. Org. Chem. 2005, 9, 141.

7. Marco-Contelles, J.; Pérez-Mayoral, E.; Samadi, A.; Carreiras, M. C.; Soriano, E.; Chem. Rev. 2009, 109, 2652.

8. Ghassamipour, S.; Sardarian, A. R.; Tetrahedron Lett. 2009, 50, 514.

9. Atechian, S.; Nock, N.; Norcross, R. D.; Ratni, H.; Thomas, A. W.; Verron, J.; Masciadri, R.; Tetrahedron 2007, 63, 2811; Bose, D. S.; Idrees, M.; Jakka, N. M.; Rao, J. V.; J. Comb. Chem. 2010, 12, 100.

10. Sridharan, V.; Ribelles. P.; Ramos, M. T.; Menéndez, J. C.; J. Org. Chem. 2009, 74, 5715.

11. Hosseini-Sarvari, M.; Can. J. Chem. 2009, 87, 1122.

12. Barbero, M.; Bazzi, S.; Cadamuro, S.; Dughera, S.; Tetrahedron Lett. 2010, 51, 2342.

13. Martins, M. A. P.; Sinhorin, A. P.; Zimmermann, N. E. K.; Zanatta, N.; Bonacorso, H. G.; Bastos, G. P.; Synthesis 2001, 1959.

14. Martins, M. A. P.; Scapin, E.; Frizzo, C. P.; Rosa, F. A.; Bonacorso, H. G.; Zanatta, N.; J. Braz. Chem. Soc. 2009, 20, 205.

15. Moreira, D. N.; Frizzo, C. P.; Longhi, K.; Zanatta, N.; Bonacorso, H. G.; Martins, M. A. P.; Monatsh. Chem. 2008, 139, 1049.

16. Martins, M. A. P.; Moreira, D. N.; Frizzo, C. P.; Longhi, K.; Zanatta, N.; Bonacorso, H. G.; J. Braz. Chem. Soc. 2008, 19, 1361.

17. Buriol, L.; Frizzo, C. P.; Prola, L. D. T.; Moreira, D. N.; Marzari, M. R. B.; Scapin, E.; Zanatta, N.; Bonacorso, H. G.; Martins, M. A. P.; Catal. Lett. 2011, 141,1130.

18. Flores, A. F. C.; Zanatta, N.; Rosa, A.; Brondani, S.; Martins, M. A. P.; Tetrahedron Lett. 2002, 43, 5005.

19. Bonacorso, H. G.; Bittencourt, S. R. T.; Lourega, R. V.; Flores, A. F. C.; Zanatta, N.; Martins, M. A. P.; Synthesis 2000, 10, 1431.

20. Martins, M. A. P.; Cunico, W.; Pereira, C. M. P.; Sinhorin, A. P.; Flores, A. F. C.; Bonacorso, H. G.; Zanatta, N.; Curr. Org. Synth. 2004, 1, 391.

21. Bonacorso, H. G.; Moraes, T. S.; Zanatta, N.; Martins, M. A. P.; Flores, A. F. C.; Arkivoc 2008, 75.

22. Staderini, M.; Cabezas, N.; Bolognesi, M. L.; Menéndez J. C.; Synlett 2011, 2577.

23. Jia, C.-S.; Zhang, Z.; Tu, S.-J.; Wang, G.-W.; Org. Biomol. Chem. 2006, 4, 104.

24. Heravi, M. R. P.; Ultrason. Sonochem. 2009, 16, 361.

25. Stadler, A.; Kappe, C. O.; Eur. J. Org. Chem. 2001, 919.

26. Martins, M. A. P.; Frizzo, C. P.; Moreira, D. N.; Buriol, L.; Machado, P.; Chem. Rev. 2009, 109, 4140.

27. Martínez-Palou, R.; Mol. Diversity 2010, 14, 3.

28. Bruker; APEX2 (version 2.1), COSMO (version 1.56), BIS (version 2.0.1.9), SAINT (version 7.3A) and SADABS (version 2004/1) & XPREP (version 2005/4), Bruker AXS Inc., Madison, Wisconsin, USA, 2006.

29. Sheldrick, G. M.; SHELXS-97 and SHELXL-97, Program for Crystal Structure Refinement; University of Gottingen, Germany, 1997.

30. Coppens, P.; Leiserowitz, L.; Rabinovich, D.; Acta Cryst. 1965, 18, 1035.

31. Farrugia, L. J.; J. Appl. Crystallogr. 1997, 30, 565.

32. Zhao, G.V.; Jiang, T.; Gao, H. X.; Han, B. X.; Huang, J.; Sun, D. H.; Green Chem. 2004, 6, 75.

33. Martins, M. A. P; Frizzo, C. P.; Moreira, D. N.; Zanatta, N.; Bonacorso, H. G.; Chem. Rev. 2008, 108, 2015.

Submitted: March 19, 2012

Published online: August 28, 2012

Supplementary Information

Description of compounds

3-Trifluoroacetyl-2,4-dimethylquinoline (3a): brown oil; C₁₃H₁₀F₃NO ¹ NMR (CDCl₃) δ 2.62 (s, 3H, H12), 2.64 (s, 3H, H9), 7.60 (ddd, 1H, ³ J 7 ³ J 8, ⁴ J 1.6, H6), 7.79 (ddd, 1H, ³J 7 ³J 8, ⁴J 1.6, H7), 7.90-8.06 (dd, 2H, ³J 8, ⁴J 1, H8, H5); ¹³C NMR (CDCl₃) δ 16.1 (C9), 23.7 (C12), 115.6 (q, ¹J 291, CF₃), 123.8, 125.2, 126.9, 127.8, 129.4, 131 (C-Ar), 142.9 (C3), 147.6 (C4), 153 (C2), 189.7 (q, ²J 37, C10).; GC/MS (EI, 70 eV) m/z 253 (M+, 58), 184 (100), 156 (70), 115 (24).

2-Ethyl-3-trifluoroacetyl-4-methylquinoline (3b): brown oil; C₁₄H₁₂F₃NO¹H NMR (CDCl₃) δ 1.37 (t, 3H, H13), 2.62 (s, 3H, H9), 2.84 (q, 2H, H12), 7.60 (ddd, 1H, ³J 7 ³J 8, ⁴J 1.4, H6), 7.79 (ddd, 1H, ³J 7 ³J 8, ⁴J 1.5, H7), 8.02 (dd, ³J 8, ⁴J 0.7, H5), 8.09 (dd, ³J 8, ⁴J 0.7, H8); ¹³C NMR (CDCl₃) δ 16 (C9), 13.1 (C13), 30.4 (C12), 115.6 (q, ¹J292, CF₃), 123.7, 125.2, 126.8, 127.5, 129.6, 130.8 (CAr), 142.7(C4), 147.8 (C3), 157.8 (C2), 190 (q, ²J 37, C10); GC/MS (EI, 70 eV) m/z 267 (M+, 4), 198 (100), 170 (16).

3-Trifluoroacetyl-4-methyl-2-propylquinoline (3c): mp 81-84 °C; C₁₅H₁₄F₃NO ¹H NMR (CDCl₃) δ 1.00 (t, 3H, H14), 1.74-1.93 (m, 2H, 13), 2.62 (s, 3H, H9), 2.78 (t, 2H, H12), 7.60 (ddd, 1H, ³J 7 ³J 8, ⁴J 1.00, H6), 7.79 (ddd, 1H, ³J 7 ³J 8, ⁴J 1.2, H7), 8.00 (dd, ³J 8, ⁴J 1, H5), 8.01 (dd, ³J 8, ⁴J 1, H8);¹³C NMR (CDCl₃) δ 16.1 (C9), 13.9(C14), 22.6 (C13), 39.4 (C12); 115.6 (q, ¹J 292, CF₃), 123.7, 125, 173, 126.8, 127.7, 129.6, 130.8 (C-Ar), 142.7(C3), 147.8 (C4), 156.8 (C2) 190 (q, ²J 37, C10); GC/MS (EI, 70 eV) m/z 281 (M+, 19), 253 (100), 212 (75), 184 (32).

2-Butyl-3-trifluoroacetyl-4-methylquinoline (3d): brown oil; C16H16F3NO ¹H NMR (CDCl3) δ 0.93 (t, 3H, H15), 1.32-1.47 (m, 2H, H14), 1.65-1.85 (m, 2H, H13), 2.62 (s, 3H, H9), 2.80 (t, 2H, H12), 7.60 (ddd, 1H, ³J 7 ³J 8, ³J 1, H6), 7.80 (ddd, 1H, ³J 7 ³J 8, ³J 1.10, H7), 8.02 (dd, ³J 8, ⁴J 1, H5), 8.08 (dd, ³J 8, ⁴J 1, H8); ¹³C NMR (CDCl₃) δ 16.1 (C9), 13.7 (C15), 22.6 (C14), 31.4 (C13), 37.2 (C12); 115.5 (q, ¹J 292, CF₃), 123.7, 125.2, 126.8, 127.7, 129.6, 130.9, 142.7(C3), 147.8 (C4), 157 (C2), 190 (q, ²J 37, C10); GC/MS (EI, 70 eV) m/z 295 (M+, 4), 253 (100), 226 (16), 198 (10), 184 (26).

3-Trifluoroacetyl-4-methyl-2-(3-methylbutyl) quinoline (3e): brown oil; C₁₇H₁₈F₃NO ¹H NMR (CDCl₃) δ 0.93 (s, 3H, H15), 0.96 (s, 3H, H15'), 1.64-1.70 (m, 1H, H14), 1.64-1.70 (m, 2H, H13), 2.61 (s, 3H, H9), 2.80 (t, 2H, H12), 7.59 (ddd, 1H, ³J 7 ³J 8, ³J 1.4, H6), 7.78 (ddd, 1H,, ³J 7 ³J 8, ³J 1.4 H7), 8.02 (dd, ³J 8, ⁴J 1, H5), 8.08 (dd, ³J 8, ⁴J 1, H8);¹³C NMR (CDCl₃) δ 16.1 (C9), 22.3 (C15, C15'), 28.2 (C14), 35.6 (C13), 38.3 (C12), 115.6 (q, ¹J 292, CF₃), 123.7, 125.2, 126.8, 127.6, 129.6, 130.8, 142.8 (C3), 147.9 (C4), 157.3 (C2), 190 (q, ²J 37, C10); GC/MS (EI, 70 eV) m/z 309 (M⁺, 4), 294 (23), 167 (34), 253 (100), 238 (11), 184 (29).

3-Trifluoroacetyl-4-methyl-2-(2-methylpropyl) quinoline (3f): brown oil; C₁₆H₁₆F₃NO ¹H NMR (CDCl₃) δ 0.93 (d, 6H, H14,14'), 2.25-2.41 (m, 1H, H13), 2.62 (s, 3H, H9), 2.68 (d, 2H, H12), 7.60 (ddd, 1H, ³J 7 ³J 8, ³J 1.3, H6), 7.79 (ddd, 1H, ³J 7 ³J 8, ³J 1.5, H7), 8.03 (dd, ³J 8, ⁴J 0.7, H5), 8.08 (dd, ³J 8, ⁴J 0.7, H8) ¹³C NMR (CDCl₃) δ 16 (C9), 22.2 (C14,C14'), 28.6 (C13), 46 (C12), 115.5 (q, ¹J 292, CF₃), 123.6, 125.1, 126.8, 129.7, 130.7 (C-Ar), 142.5 (C3), 147.7 (C4), 156.2 (C2), 189.9 (q, ²J 37, C10); GC/MS (EI, 70 eV) m/z 236 (MH+, 7), 166 (40), 99 (100), 69 (30).

3-Trichloroacetyl-2,4-dimethylquinoline (8a): mp 84-85 °C; C13H10Cl3NO ¹H NMR (CDCl3) δ 2.81 (s, 3H, H12), 2.91 (s, 3H, H9), 7.58 (ddd, 1H, ³J 7 ³J 8, ³J 0.9, H6), 7.76 (ddd, 1H, ³J 7 ³J 8, ³J 1.2, H7), 8.04 (dd, ³J 8, ⁴J 1, H5), 8.14 (dd, ³J 8, ⁴J 1, H8); ¹³C NMR (CDCl₃) d 18.3 (C9), 22.9 (C12), 94.2 (C11), 124.2, 125.5, 126.5, 128.3, 129.9, 132.7 (C-Ar), 143.3 (C3), 146.2 (C4), 152.6 (C2), 190 (C10); GC/MS (EI, 70 eV) m/z 302 (M+, 4 ), 184 (100), 156 (98), 115 (14).

3-Dichloroacetyl-2,4-dimethylquinoline (9a): mp > 200 °C; C₁₃H_UCLNO ¹H NMR (CDCl₃) δ 2.68 (s, 3H, H12), 2.70 (s, 3H, H9), 6.40 (s, 1H, H11), 7.60 (ddd, 1H, V 7 V 8, V 1.5, H6), 7.80 (ddd, 1H, V 7 V 8, V 1.5, H7), 8.00-8.08 (dd, V 8, V 0.9, H5, H8); ¹³C NMR (CDCl₃) d 16.7 (C9), 23.6 (C12), 70.4 (C11), 123.9, 125.7, 127.2, 129, 130.5, 131.5 (C-Ar), 143 (C3), 146.7 (C4), 153.2 (C2), 192.8 (C10); GC/MS (EI, 70 eV) m/z 267 (M+ 9), 184 (100), 170 (9), 156 (69), 143 (27).

3-Chlorodifluoroacetyl-2,4-dimethylquinoline (10a): brown oil; C₁₃H₁₀ClF₂NO ¹H NMR (CDCl₃) δ 2.64 (s, 3H, H12), 2.66 (s, 3H, H9), 7.60 (ddd, 1H, V 7 V 8, V 1.2, H6), 7.80 (ddd, 1H, V 7 V 8, V 1.5, H7), 7.55-8.07 (dd, V 8, V 1, H5, H8); ¹³C NMR (CDCl₃) δ 16.7 (t, V 2, C9), 23.8 (t, V 2, C9), 120.6 (t, V 305, CF₂Cl), 123.9, 125.2, 125.8, 127.1, 127.7, 128.8, 129.1, 131.4 (C-Ar), 143.4 (C3), 147.1 (C4), 153.1 (C2), 189.6 (t, V 33, C10); GC/MS (EI, 70 eV) m/z 269 (M+ 20), 184 (100), 156 (53), 115 (18).

3-(1,1,1,2,2-Perfluoropropionil)-2,4-dimethyl-quinoline (11a): brown oil; C₁₄H₁₀F₅NO ¹H NMR (CDCl₃) δ 2.60 (s, 3H, H13), 2.63 (s, 3H, H9), 7.60 (ddd, 1H, V 7 V 8, V 1.2, H6), 7.80 (ddd, 1H, V 7 V 8, V 1.3, H7), 7.80-8.02 (dd, V 8, V 1, H5, H8); ¹³C NMR (CDCl₃) δ 16 (C9), 23.6 (C13), 104.2, 107.0, 109.5 (t, V267, CF₂, q V 37, CF₃), 113.7, 116.6, 119.4, 122.3 (q, V 286, CF₃, t, V 33, CF₂), 123.8, 125.1, 126.8, 129.4, 129.9, 131 (C-Ar), 143.2 (C3), 147.6 (C4), 153.1 (C2), 192.4 (t, V 28, C10); GC/MS (EI, 70 eV) m/z 303 (M+, 34), 184 (100), 156 (85), 115 (40).

Figure S1 - Click to enlarge

Figure S2 - Click to enlarge

Figure S3 - Click to enlarge

Figure S4 - Click to enlarge

Figure S5 - Click to enlarge

Figure S6 - Click to enlarge

Figure S7- Click to enlarge

Figure S8 - Click to enlarge

Figure S9 - Click to enlarge

Figure S10 - Click to enlarge

Figure S11 - Click to enlarge

Figure S12 - Click to enlarge

Figure S13 - Click to enlarge

Figure S14 - Click to enlarge

Figure S15 - Click to enlarge

Figure S16 - Click to enlarge

Figure S17 - Click to enlarge

Figure S18 - Click to enlarge

Figure S19 - Click to enlarge

Figure S2 ^{0 - Click to enlarge}

Publication Dates

• Publication in this collection
  11 Sept 2012
• Date of issue
  Sept 2012

History

• Received
  19 Mar 2012
• Accepted
  28 Aug 2012