| | Table of contents
Polímeros vol.17 no.3 São Carlos July/Sept. 2007  Seção Editorial | | | | | | · Mensagem do Vice Presidente da ABPol
Joaquim, Edson F.
| | | | | | · Editorial
| | | | | | · Fractografia de Compósitos Estruturais
Rezende, Mirabel C.
| | | | | | · Caros editores
Pinto, José Carlos
| | | | | Seção Técnica | | | | | | · Optimization of the interface/interphase of carbon fiber/PPS thermoplastic composites using BTDA/DDS poly(amic acid)
Nohara, Liliana B.; Kawamoto, Aparecida M.; Nohara, Evandro L.; Rezende, Mirabel C.
| | | | | | · Performance of multilayer films of thermoformed packages
Crippa, Agnaldo; Sydenstricker, Thais H. D.; Amico, Sandro C.
| | | | | | · Shear bond strength between artificial acrylic resin teeth and denture base resins
Pero, Ana C.; Marra, Juliê; Polatto, Cilene A.; Barbosa, Débora B.; Compagnoni, Marco A.
| | | | | | · Environmental degradation of thermoplastic materials used in banana agricultural labors in Colombia
Mejía, José L.; Kerguelén, Herbert; Gil, Angélica; Gañán, Piedad
| | | | | | · Characterization of an electrospinning process using different PAN/DMF concentrations
Gomes, Demetrius S.; Silva, Ana N. R. da; Morimoto, Nilton I.; Mendes, Luiz T. F.; Furlan, Rogerio; Ramos, Idalia
| | | | | | · Development of polyurethane aqueous dispersions based on hydroxy-terminated polybutadiene: reaction variables
Magalhães, Lúcio C. de; Coutinho, Fernanda M. B.; Delpech, Marcia C.
| | | | | | · Development of polypropylene/brazilian bentonite clay nanocomposites: I treatment of clay and the influence of the compatibilizers on the mechanical properties
Rodrigues, André W.; Brasileiro, Maria I.; Araújo, Williane D.; Araújo, Edcleide M.; Neves, Gelmires A.; Melo, Tomás J. A. de
| | | | | | · Substitution of asbestos for aluminosiliacate and expandable graphite in polyurethane composites used in rocket motors
Crespim, Henrique; Azevedo, Margarete F. P.; David, Luis H.; Cassu, Silvana N.; Lourenço, Vera L.
| | | | | | · Effect of rigid segment content on the physical, mechanical, chemical and morphological properties of microcellular polyurethane elastomers
Pacheco, Marcos F. M.; Fiorio, Rudinei; Zattera, Ademir J.; Zeni, Mara; Crespo, Janaina S.
| | | | | | · Study of the use of rice husk ash as filler in polyamide 6 and polyamide 6.6 matrices
Ferro, Waldir P.; Silva, Leonardo G. A. e; Wiebeck, Hélio
| | | | | | · Friction and wear of a thermal sprayed PET - poly(ethylene teraphthalate) coating
Nunes, Rogério A. X.; Sade, Wagner; Branco, José Roberto T.
| | | | | | · Numerical simulation to evaluate the effect from pre-polymerization on the behavior of tubular reactors
Nogueira, André L.; Machado, Ricardo A. F.; Quadri, Marintho B.; Lona, Liliane M. F.
| | | | | | · Comparison of the influence of curing times applied to composite resins cured with LED and Incandescent Light
Ulhoa, Michele P. M.; Santana, Lúcio R. S.; Bianchi, Eduardo C.; Cruz, Carlos E. D.; Aguiar, Paulo R.; Freitas, César A. de; Freitas, Márcia F. A. de
| | | | | | · Mechanisms of PVC thermal degradation and stabilization
Rodolfo Jr., Antonio; Mei, Lúcia Helena I.
| | | |
|
All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License
