Open-access From design to detection: a review of 3d printing materials, electrochemical sensors, and biosensors

Abstract

Three-dimensional (3D) printing, also referred to as additive manufacturing, has emerged as a practical approach for managing accessible production processes aimed at fabricating widely used components and objects commonly found in daily life. The technique is distinguished by its ability to produce intricate designs, as well as its cost-effectiveness and rapid manufacturing capabilities. Moreover, it is relatively user-friendly, requiring the operator to create a digital model of the desired component using CAD (Computer-Aided Design) software, which is then exported into a file format compatible with the printer. Within the realm of additive manufacturing, a broad array of techniques is available, each suitable for processing different materials. Among the available additive manufacturing techniques, fused deposition modeling (FDM) is the most widely used for fabricating electrochemical devices because of its simplicity, low cost, and compatibility with conductive polymer composites. The fabrication of electrochemical sensors and biosensors has attracted increasing attention owing to the rapid prototyping and design flexibility offered by FDM. The purpose of this review is to discuss recent advances in FDM-printed electrochemical sensors and biosensors, focusing on conductive filament compositions, fabrication strategies, electrochemical performance, and emerging applications. Current challenges and future perspectives for wearable and sustainable sensing platforms are highlighted.

Key words
Additive manufacturing; technology; prototyping; electrochemical sensors; 3D printing

INTRODUCTION

What is 3D printing?

Three-dimensional (3D) printing, also referred to as additive manufacturing, has been widely employed over the past decades for the fabrication of different materials through computer-aided design (CAD) modeling. This technology has revolutionized several engineering fields by enabling the modification of product models with unprecedented flexibility. Consequently, numerous strategies for additive manufacturing have been proposed, mainly due to the significant advantage of reducing production time (Arefin et al. 2021).

The term encompasses a broad range of innovations across multiple disciplines, with virtually unlimited possibilities for fabricating parts using diverse precursors. The adoption of different 3D printing methods has attracted growing attention from both industry and academia, not only for the fabrication of new devices but also for the modification of existing materials (Mahapatra et al. 2024).

This technology has expanded the range of achievable geometries, enabling the production of intricate, complex designs that would conventionally require highly elaborate modeling. The challenges that previously limited such fabrications were overcome by the development of equipment capable of manufacturing objects using 3D modeling tools and specialized software. Moreover, a wide variety of materials can be processed, including ceramics, thermoplastics, metals, resins, and other composites (Agrawaal & Thompson 2021, Zhai et al. 2025).

With the rapid advancement of 3D printing technologies, several techniques have been established for producing functional objects with different applications. The most widely used include fused deposition modeling (FDM), stereolithography (SLA), digital light processing (DLP), selective laser sintering (SLS), direct metal laser sintering (DLMS), polyjet, selective laser melting (SLM), and electron beam melting (EBM) (Volpato 2021, Jiang et al. 2022).

Stereolithography is a pioneering technique in additive manufacturing, operating on the principle of photopolymerization, where resin is solidified through light absorption. A critical factor for efficient printing is the energy density applied to the material, ensuring the layer-by-layer construction without interruptions. Post-processing usually involves chemical treatment to remove excess resin, followed by ultraviolet (UV) curing to enhance structural stability (Kafle et al. 2021, Pu et al. 2023). These procedures, however, can be further optimized to reduce production time (Kafle et al. 2021, Pu et al. 2023).

Similar to SLA, DLP also employs a photopolymeric resin tank; however, the main distinction lies in the light exposure system. In DLP, a digital projection screen is used to cure the resin layer by layer, with each projected image defining the geometry of the part (Guggenbiller et al. 2023).

SLS, in turn, uses a laser beam to fuse polymer powder in a closed chamber, a principle that differs from other common techniques (Nofar et al. 2022). Different particle binding mechanisms enable the transformation of powdered feedstock into three-dimensional objects (Kafle et al. 2021). Materials such as ceramics, polymers, and even renewable resource-derived powders can be employed due to their availability in particulate form (Yu et al. 2021).

Preheating is a crucial step in this process, as uneven heat distribution can significantly affect the quality of the final piece. To overcome the limitation of SLS in processing only polymers, DLMS was developed for fabricating parts from metal-based powders using laser irradiation. The main advantage of this approach is the high geometric accuracy, as the powder is deposited layer by layer to produce high-resolution structures (Kafle et al. 2021, Yu et al. 2021, Hassan et al. 2022, Sedlacek et al. 2023).

Among the laser-based additive manufacturing techniques, SLM is distinguished by its ability to melt regions of a powder bed using thermal energy selectively. In practice, the laser fuses the outer regions of the powder layers before consolidating the inner volume of the material (Volpato 2021). Unlike powder-based processes, the PolyJet technique employs jetting of liquid photopolymeric resins onto a substrate. The polymer droplets are deposited sequentially and solidified immediately under ultraviolet irradiation, which prevents imperfections and reduces material loss (Volpato 2021).

Driven by industrial demand for faster and more versatile additive manufacturing routes, the EBM technique was developed. It is conceptually similar to laser-based methods but relies on an electron beam, offering higher scanning speeds and elevated processing temperatures. However, its main drawback compared to other approaches is the reduced accuracy of the final product due to the extremely high processing speed (Volpato 2021).

Among all available techniques, FDM remains the most widely used because of its advantages, including mass production of objects and prototypes, relatively low cost, ease of model design, and rapid prototyping (Contreras-Naranjo et al. 2021, Abdalla & Patel 2021). This technique typically employs thermoplastic materials, where the print head is heated until the polymer reaches its melting point and is deposited layer by layer onto the build platform. Unlike resin-based methods, FDM does not require UV curing, since the processed materials are usually solid at room temperature (Sampaio et al. 2022, Flores et al. 2022).

History of Additive Manufacturing

The concept of 3D printing emerged in the 1980s, when researcher Hideo Kodama proposed an invention similar to stereolithography, although no patent was filed at that time. The first patent related to SLA was later submitted by Chuck Hull in 1984, marking a milestone in the history of 3D printing. Hull proposed a device consisting of a laser directed onto a tank filled with photopolymer, intending to solidify successive layers of material until the desired part was formed. In this way, the process enabled the construction of an object layer by layer until the printing was completed (Agrawaal & Thompson 2021).

Hull’s work opened the door to significant advances in 3D printing technology, leading to the development of different printing methods designed to enhance part quality and accelerate production. As a result, he became a pioneer in the fabrication of printers capable of producing parts with more complex designs and was also responsible for initiating the commercialization of 3D printers (Volpato 2021).

However, one of the greatest challenges at the time was the widespread adoption of 3D printing as a faster and simpler manufacturing method. Early printers were marketed at very high prices, which made them less attractive to both academia and industry. Over the following decades, new 3D printing techniques were developed and refined according to user needs and demands. Still in the 1980s, Carl Deckard developed the selective laser sintering (SLS) technology, based on the use of powdered materials. This approach offered major advantages, such as improved thermal properties and high resistance at elevated temperatures, which contributed to enhanced part finishing (Volpato 2021).

Over the years, various additive manufacturing techniques were established, including fused deposition modeling (FDM), created in 1988 by Scott Crump. Crump’s patent led to the foundation of a company dedicated to the commercialization of FDM printers. With the method’s popularization, different thermoplastic feedstocks were developed for this technique, which is based on the extrusion of molten material layer by layer onto the build platform. In recent years, FDM has become the most widely employed 3D printing method due to its low maintenance costs and ease of operation (Matias & Rao 2015).

By the 2000s, 3D printers began to be sold at more affordable prices. Despite this reduction, the cost remained high for several target groups. With the gradual dissemination of the technology, scientists started to develop new models and applications in medicine, civil engineering, the textile and food industries, and especially in academia, where 3D printing has been applied in the development of novel laboratory instruments (Sharma et al. 2024, Cândido et al. 2024, dos Santos et al. 2022).

The technological progress in this field has been exponential, with new machines currently operating under the concept of 4D printing. In this approach, 3D printed materials are capable of changing their size and shape in response to external stimuli such as temperature, pressure, or humidity (Mehrpouya et al. 2021).

Applications of Additive Manufacturing

Initially, additive manufacturing was conceived to increase the availability of parts for engineering purposes, mainly by reducing the overall time associated with fabrication, purchase, and delivery. Over time, the technology was refined into a rapid, relatively low-cost, and highly reproducible method, enabling its application in the healthcare sector for the development of prostheses, implants, hearing aids, and safety equipment. With these medical advances, biocompatible materials have been engineered, featuring improved mechanical properties, as well as injectable hydrogels designed to ensure structural integrity (Arefin et al. 2021, Bertsch et al. 2023).

Among the essential properties required for biomedical applications, flexibility is fundamental for prostheses to adapt to human physiology, while toughness is critical to ensure the material’s ability to absorb energy and deform under impact without cracking (Hussan et al. 2024). Therefore, these materials must exhibit enhanced mechanical strength, greater similarity to biological tissues, and high biocompatibility, as they interact directly with joints, biological fluids, and the human body in general (Arefin et al. 2021).

Recent advances have also expanded the use of 3D printing into regenerative medicine. FDM has successfully fabricated PLA-based composites containing multifunctional bioactive glass to produce scaffolds (Bernardo et al. 2021).

Despite these advancements, additive manufacturing in biomedical applications has significant challenges. Depending on the type of additive manufacturing, the high roughness can promote bacterial adhesion, unreacted residual monomers, and diverse porosity in the device.

In civil engineering, additive manufacturing can drastically reduce the construction time of buildings. Traditionally, construction projects take several months to be completed; however, with the implementation of large-scale 3D printing machines, this period can be significantly shortened, while also reducing the need for manual labor (Ting et al. 2024, Praveena et al. 2022). Moreover, additive manufacturing has contributed to the development of industrial equipment, facilitating the replacement of automotive components and operational systems (Liu et al. 2021). However, scaling up additive manufacturing for structural applications introduces some bottlenecks, because on a large scale, this technology is limited when the topic is about concrete printing and controlling deposited layers.

In this context, engineering has increasingly focused on optimizing prototype development to minimize labor costs and streamline fabrication. This allows for the production of complex geometries and customized components directly tailored for industry. Robust parts that were once difficult to manufacture can now be fabricated using metals and other lightweight materials, thereby improving product performance.

The evolution of additive manufacturing has also enabled the production of components for aerospace and automotive applications, making these technologies more cost-accessible to companies. In addition, it promotes the use of lighter and easier-to-handle raw materials. Sustainable feedstocks can also be employed, thereby contributing to waste reduction during fabrication (Liu et al. 2021). Additionally, the anisotropic mechanical properties of printed components pose a major challenge for safety-critical sectors, such as aerospace engineering, where strict regulatory standards require highly isotropic material behavior, a challenge that remains difficult to replicate consistently across different printing technologies.

The food industry began investing in 3D printing in the early 2000s, when a cake was designed using this technology, suggesting the feasibility of producing food while reducing waste of raw materials (Ligon et al. 2017). The aim is to simplify production, lower manufacturing costs, and create products similar to conventional ones already available on the market.

One of the main challenges for this sector is providing consumers with sensorially acceptable products while introducing innovation in flavors and structures. Sensory analysis commonly evaluates parameters such as texture, taste, aroma, and appearance. Nonetheless, 3D printing enables the development of personalized nutrition programs, particularly for individuals with food intolerances, as well as sophisticated projects in gastronomic design and customized cuisine (Ligon et al. 2017, Sharma et al. 2024).

The increasing use of edible biopolymers has further revolutionized this area, allowing for the fabrication of products such as chocolate, protein bars, purées, icings, edible gels, coatings, and doughs. Furthermore, 3D printing enables the production of vegan food products, such as cultivated meats, without the need for animal slaughter (Ligon et al. 2017).

In recent years, the textile industry has also embraced 3D printing to design anatomical clothing adapted to the human body, combining comfort, design, and innovation. For instance, the technology has been applied in the development of sports shoes designed to minimize impact during movement (Avinash et al. 2024).

Nevertheless, the textile sector is one of the most polluting industries worldwide, generating large amounts of waste that are often not reused. As an alternative, additive manufacturing has drawn attention for enabling the use of sustainable and unconventional raw materials, while also allowing for greater complexity in garment design without significantly increasing production costs (Khajavi 2021, Abisuga & de Beer 2023). One of the technical barriers for the textile industry is achieving strong adhesion between the extruded polymer and conventional textile substrates. Moreover, the low production throughput of current additive manufacturing technologies presents a major obstacle for high-volume mass production in the fashion industry.

Overall, 3D printing has become an important tool across multiple fields of research, especially in academia, where it contributes to the accelerated production of prototypes and supports continuous innovation in the creative process of new devices. The technology enables the development of complex designs and geometries that would otherwise be challenging to produce.

PROTOTYPING AND MATERIALS

Prototyping

Prototyping represents a fundamental stage in 3D printing, as it defines the process by which the object will be fabricated. At this stage, the complexity of the design is elaborated, and the initial visualization of the part is achieved. For multiple applications, prototypes can be produced in different colors for demonstrative, interactive, and aesthetic purposes, facilitating the presentation of the initial concept (Ligon et al. 2017). Therefore, prototyping is an essential process in additive manufacturing, especially in the development of new devices through 3D modeling (Gabalski et al. 2023).

As previously mentioned, prototyping is carried out by preparing a digital model using appropriate 3D modeling software. Among the available CAD programs, there are both entry-level and advanced options. Table I presents examples of commonly used software for the design of different objects. Once the design is completed, the model is converted into the STL (Standard Triangle Language) format, which is the file type commonly recognized by slicing software.

Table I
Examples of software options for 3D modeling of parts and devices.

Subsequently, the 3D representation is processed with slicing software that defines the printing parameters. For the FDM technique, these parameters include bed temperature, nozzle temperature, and printing speed. These settings are critical to ensure that the printed object is completed without defects. The slicing software converts the STL file into G-code, the machine-readable language containing the defined parameters as commands for the printer (Figure 1). After the object is printed, it may or may not undergo post-processing, aimed at removing burrs and imperfections. This stage may also involve the use of support structures, particularly in taller parts requiring physical reinforcement during printing (Kafle et al. 2021).

Figure 1
Schematic representation of the prototyping and printing process: (1) design modeling using CAD software, (2) conversion of the file into .STL format for use in slicing software before printing, (3) conversion of the design into the machine-readable G-code language for fabrication, and (4) final printed object.

In addition to part fabrication, miniature systems can be fully modeled in 3D, contributing to reduced material costs, particularly metals, and minimizing physical space requirements. In this context, prototyping is one of the key stages of the creation process, as the design of the object plays a crucial role in determining the device’s final configuration, enabling clearer, more precise visualization of the printed project (Li et al. 2018).

Materials

Additive manufacturing is a versatile technique that allows the processing of a wide range of materials. Modelling can be performed using different feedstocks, which have been specifically developed to meet diverse application demands. As previously discussed, the techniques have been optimized to employ various precursors, such as thermoplastics, ceramics, thermosets, biomaterials, composites, and metallic alloys (Abisuga & de Beer 2023, Praveena et al. 2022).

Thermoplastics are among the most widely used materials due to their accessibility and relatively low cost. The most common examples include acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), polypropylene (PP), and polyurethane (PU) (Alsabhi et al. 2023, Dadashi & Azadi 2022). Polymers such as PP and PU often require additional treatments and process optimizations due to their behavior during extrusion at high temperatures, which can lead to warping and shrinkage issues. Therefore, careful control of filament diameter and surface quality is crucial to prevent issues during additive manufacturing. PLA, in contrast, offers significant advantages compared to other polymers, particularly its ability to yield high-resolution printed parts (Prasopdee et al. 2023). Furthermore, thermoplastics can be modified with conductive particles to fabricate sensors (Figure 2).

Figure 2
Commonly used filaments for 3D printing, including commercial polymeric and conductive filaments

Metallic alloys and composites offer superior thermal resistance and can deliver improved surface finishing in the final printed object, despite the potential for structural defects. Their application, however, remains limited due to reduced flexibility and restricted prototyping options. In these cases, selective laser sintering (SLS) is typically employed for the fabrication of metallic objects (Wang et al. 2024). Another approach involves the deposition of metallic particles on the surface of a substrate or their incorporation into other materials to enhance properties and develop functional materials, particularly for applications in catalysis and sensing (Flores et al. 2022).

Ceramics are also extensively employed in additive manufacturing, where precise control of temperature and heating rate is critical to preserving material properties such as hardness. These materials are valued for their excellent mechanical strength, high resistance, corrosion toughness, and optical properties (Ligon et al. 2017).

Another important class of materials is biomaterials, which have gained considerable attention due to their versatile properties. Hydrogels and condensed biomaterials, for instance, exhibit superior mechanical strength and enhanced resistance to deformation compared to traditional biomaterials. In addition, they are biocompatible across different species and interact through dynamic bonding mechanisms (Bertsch et al. 2023).

Thus, prototyping and the use of different materials in additive manufacturing play a pivotal role in the development of novel equipment and devices, particularly sensors. A major advantage is the rapid production of functional sensors, often within a single day, using only appropriate design software. Traditionally, the fabrication of such devices required molds and complex shaping processes. Additive manufacturing, however, streamlines this process by reducing the number of steps involved in defining sensor geometries, while enabling the standardization of features such as length, thickness, flexibility, and stiffness.

CONDUCTIVE FILAMENTS

The materials employed in the development of electrochemical sensors via additive manufacturing are diverse. Typically, the main precursors are thermoplastics such as PLA, ABS, TPU, among others. These filaments are composed of polymers combined with conductive particles such as graphene (G), carbon black (CB), graphite (Gr), and multi-walled carbon nanotubes (MWCNTs) (Ferreira et al. 2021). A major advantage compared to metallic materials commonly used for sensor fabrication is the lower production cost. All the materials were chosen according to the necessary or important intrinsic properties.

Carbon-based materials represent an advantageous alternative due to their reduced cost, making electrochemical sensors more accessible and commercially viable compared to metals. Moreover, these materials can be produced directly in the laboratory. Initially, polymers are blended with conductive particles and heated until a bulk composite is formed. This material is then ground and subsequently processed in an extruder.

The extrusion process consists of feeding the powdered material into a hopper with a screw mechanism that drives it toward a heated nozzle. The equipment must reach approximately 200 °C, depending on the polymer employed. The extruded filament acquires a cylindrical shape compatible with 3D printer feeding systems. A schematic representation of these steps is shown in Figure 3. The ability to produce tailored materials in the laboratory has enabled the combination of different carbonaceous fillers with a wide variety of polymers.

Figure 3
Schematic representation of conductive filament production for sensor fabrication via additive manufacturing

Among the most widely used carbon-based fillers, carbon black stands out for its spherical-like spatial arrangement, resulting from the high concentration of carbon atoms interconnected by covalent bonds, which contribute to its relatively low cost and ease of incorporation into composite materials (Zheng et al. 2021). However, the electrochemical performance is often inferior to that of more structurally ordered carbon nanomaterials, in different applications requiring high sensitivity and fast electron transfer.

Graphene has attracted considerable attention due to its two-dimensional sheet-like structure in a hexagonal arrangement. Carbon atoms are covalently bonded, and one of their most notable features is their atomic-scale thickness. These present a particularly high mechanical strength and excellent charge carrier mobility (Zheng et al. 2021). Despite these advantages, implementation on a large scale is a challenge because of the reproducible synthesis and aggregation phenomena.

Graphite consists of multiple graphene sheets arranged in a planar stacking. These layers are held together by intermolecular Van der Waals interactions. A little trick is that a lower accessible surface area can limit electrochemical activity in sensing applications. Carbon nanotubes (CNTs) are cylindrical nanostructures composed of carbon atoms with diameters on the nanometer scale. They are recognized for their exceptional physical, electrical, and mechanical properties and are widely employed in nanotechnology, particularly in the fabrication of electrochemical sensors (Zheng et al. 2021). Nevertheless, their performance depends on structural parameters such as diameter and degree of functionalization, which can increase production costs.

Overall, the choice among carbon black, graphite, graphene, and CNTs involves a trade-off between cost, surface area, electrochemical performance, and processability. The choice depends exclusively on cost and accessibility. Consequently, the material choice depends on the specific requirements of the intended sensing application and not a single intrinsic property.

Laboratory-produced filaments have gained relevance due to the possibility of incorporating conductive particles into different polymers. Carbon black and graphene, when combined with PLA, are frequently used in filament production, with the proportions adjustable to the desired properties without compromising the flexibility required for proper 3D printer processing (Stefano et al. 2022). Carbon black can also be combined with MWCNTs to fabricate sensors with larger surface areas and enhanced electrical conductivity (Crapnell et al. 2024).

PLA-based filaments can also undergo chemical treatment with dimethylformamide (DMF), which removes portions of the polymer matrix and exposes the conductive fillers on the surface. Characterization of these materials can be performed using techniques such as scanning electron microscopy (SEM) and X-ray diffraction (XRD) (da Silva et al. 2023). Thus, a wide variety of filaments can be engineered for application in electrochemical sensors aimed at detecting multiple species, using different types of thermoplastics.

Generally, a wide range of diverse conductive filaments has expanded all the possibilities for the development of electrochemical sensors. Nevertheless, improvements in conductivity, availability of surface area, and sensitivity must be carefully balanced against challenges related to reproducibility, cost, and manufacturing complexity.

Table II summarizes different filaments produced in the laboratory with a variety of conductive fillers, highlighting the advantages of carbon-based materials. These compounds offer clear benefits due to their relatively low cost compared to metallic counterparts and, additionally, can be combined with polymers that assist in filament structuring.

Table II
Conductive filaments produced with carbon-based fillers and thermoplastics.

3D-PRINTED SENSORS

With technological advances, new strategies have emerged for developing analytical devices through additive manufacturing, driven by the lower production cost compared to other fabrication techniques and by the physical flexibility of the materials, which enables the production of lightweight and portable objects. Another advantage is the possibility of customizing these devices, which can be designed in advance for use in laboratory analyses and research development. Among the components produced are adapters, electrochemical cells, holders, and, most notably, sensors. Sensors are employed for detecting physical or chemical changes and act as transducers of different types of signals, most commonly electrical (Zhou et al. 2022).

Electrochemical sensors developed by 3D printing can be applied in several electrochemical applications. The most widely used 3D printing technique for fabricating these sensors is FDM, which employs a thermoplastic as the precursor material. Its advantages include low manufacturing cost, large-scale production of sensors, and straightforward equipment maintenance. On the other hand, one of the greatest challenges is ensuring that the sensors are reproducible and suitable for commercialization, or sufficiently reliable for accurate analyses (Pradela-Filho et al. 2024).

In recent years, the combination of additive manufacturing with electrochemical detection has rapidly evolved, particularly through the integration of conductive materials and microfluidic platforms, enabling the development of compact and portable analytical devices (Selemani et al. 2024).

In addition to conventional FDM printers, other additive manufacturing approaches have been investigated for electrode fabrication. Some electrochemical sensors have also been fabricated using a 3D printing pen. To miniaturize additive manufacturing, the 3D printing pen functions as a mini-extruder, similar to FDM technology. However, the limitations of this process stem from the standardization and reproducibility of these electrodes (Lisboa et al. 2023).

To overcome all these limitations, it is essential to understand both the material properties and the stages of the additive manufacturing process, especially given the strong influence of the printer’s mechanical variables, such as infill density, bed temperature, and nozzle temperature. Many researchers have devoted efforts to optimizing this system.

These sensors can be applied to detect different species and components in real samples, such as urine, blood, water, and soil. They are therefore widely used in electroanalytical systems as a versatile tool, often providing high sensitivity in analysis (Silva et al. 2025).

In addition to electrochemical sensors, electrochemical cells can also be fabricated by FDM using a non-conductive polymer, aiming to promote the miniaturization of the electrochemical system. The main advantages of miniaturized electrochemical systems obtained by additive manufacturing include relatively low cost and the possibility of conducting in situ analyses (Henriques et al. 2025).

Both materials can be used to develop a 3D-printed-based flow device, with different microfluidic channels to support small liquid volumes, and, added to this, integrate both materials at the same printing to make this electrochemical device (Labuda et al. 2026).

As discussed earlier, electrodes produced by additive manufacturing with thermoplastics can undergo different post-printing treatments to expose conductive particles on the surface, increase the electroactive area, and improve the electrochemical response. Common procedures include exposing the materials to bases, acids, organic species, or plasma. Other methods have emerged as alternatives to the commonly used ones, for instance, the treatment of an electrochemical sensor with reactive oxygen cold plasma significantly improves the response due to the greater exposure of carbon black (Pereira et al. 2021).

However, chemical activation alone may not be sufficient to enhance the electrode surface response. In such cases, modification with metallic nanoparticles can be performed to improve electrocatalytic activity, thereby making the sensor more selective toward the detection of specific species (Teekayupak et al. 2023, Caldas et al. 2026).

Consequently, researchers have proposed innovations aimed at detecting organic species. Nanoparticles known as quantum dots can be deposited onto the electrode surface, increasing the electrochemical response area. Moreover, they show great potential for biosensor applications due to their biocompatible properties (Wan et al. 2023).

Table III summarizes the different electrodes fabricated for detecting chemical species in samples. These studies contribute to clinical analyses, environmental pollution monitoring, and contaminant identification. Electrochemical sensors can also be used for the simultaneous detection of chemical components, often present in complex mixtures. Thus, the development of 3D-printed sensors from lab-fabricated conductive filaments becomes feasible, given the use of relatively low-cost materials, ease of equipment handling during printing, and reduced fabrication time for multiple electrodes in a single day. Additional advantages of electroanalytical assays include lower energy consumption compared to other equipment, shorter analysis time, and reduced use of organic solvents.

Table III
Electrodes produced by additive manufacturing using conductive filaments for the detection of different analytes.

BIOSENSORS

Among electrochemical sensing platforms, biosensors have attracted considerable attention because they combine the inherent selectivity of biological recognition elements with the high sensitivity of electrochemical transducers. By incorporating biomolecules such as enzymes, antibodies, nucleic acids, or aptamers onto the electrode surface, biosensors enable the selective detection of a wide variety of clinically and environmentally relevant analytes (Silva et al. 2025, Cândido et al. 2024, Jiang et al. 2022).

3D printing is a technology that has become a key enabling tool in the development of biosensors, as it was previously difficult to adapt them for in situ analysis due to their complexity. Moreover, additive manufacturing has made a significant contribution to the technological advancement of biosensors for the detection, diagnosis, and monitoring of diseases, viruses, and others (Kalligosfyri et al. 2026).

One of the greatest advantages of 3D-printed biosensors is the remarkable flexibility offered during device fabrication. This technology enables the production of electrodes with customized geometries, integrated sensing platforms, and miniaturized analytical systems that would be difficult or prohibitively expensive to fabricate using traditional manufacturing techniques. In addition, additive manufacturing reduces material waste and fabrication time while facilitating the optimization of sensor architecture according to the intended analytical application.

The benefits of additive manufacturing extend beyond electrode fabrication. Recent developments have enabled the integration of complete electrochemical platforms, including sensing elements, microfluidic channels, sample reservoirs, electronic housings, and fluid management systems, into a single device. Such integration is particularly valuable for point-of-care (POC) diagnostics, where rapid analysis at the site of sample collection minimizes transportation requirements, reduces contamination risks, and provides faster clinical decision-making (Shi et al. 2025, Chan et al. 2017).

Furthermore, 3D printing has significantly advanced the development of lab-on-a-chip and organ-on-a-chip technologies by enabling the fabrication of sophisticated microfluidic architectures with high geometric precision. The capability to simultaneously manufacture structural components and analytical modules simplifies device assembly and reduces production costs, making integrated biosensing platforms increasingly accessible for both research laboratories and clinical applications (Raucci et al. 2026, Carvalho et al. 2021, Cook et al. 2025).

Another important advantage of 3D-printed biosensors is their rapid analytical response. Compared with conventional laboratory methods, which often require extensive sample preparation and prolonged analysis times, electrochemical biosensors can provide quantitative results within minutes while maintaining high analytical sensitivity. Consequently, these devices have become attractive alternatives for clinical diagnostics, disease screening, and continuous health monitoring.

Figure 4 shows a variety of applications using 3D-printing technology to develop different devices and to prototype auxiliary biosensing detection. In this way, the most important thing is facilitating the application of all the sensors in local detection, and 3D printing can be a good tool to assist and improve an increasing number of biosensors in direct applications. Complex, novel, and modern designs can be applied using this technique and may be more interesting for in situ analysis.

Figure 4
Schematic representation of various 3D-printed devices and electrochemical biosensors for biosensing: (A) 3D-printed biometric electrochemical bracelet [Adapted with permission (Koukouviti et al. 2025). Copyright (2026), American Chemical Society], (B) conducting microneedle-based electrochemical biosensor [Adapted with permission (Kadian et al. 2025). Copyright (2026), Royal Society of Chemistry], (C) all-in-one 3D-printed device for uric acid detection [Adapted with permission (Raucci et al. 2026). Copyright (2026), American Chemical Society], and (D) portable device to put the paper-based modified sensor [Adapted with permission (Sharma et al. 2025). Copyright (2026), American Chemical Society].

Additive manufacturing has significantly contributed to the development of these devices, particularly for detecting SARS-CoV-2-related and glucose-related biomarkers. During the pandemic, several research groups developed 3D-printed biosensors to enhance sensitivity in the identification of viral markers. Also, glucose monitoring remains a highly relevant field, since elevated blood levels can lead to the onset of diabetes and its associated complications.

Biosensors produced by 3D printing are generally fabricated from thermoplastic filaments combined with conductive particles. After printing, biomolecules are immobilized on the surface through different strategies, enabling direct application in biological samples such as plasma, urine, and saliva (Silva et al. 2025, Cardoso et al. 2020). Surface modifications are also explored, such as the incorporation of metal particles, especially gold, in order to improve the analytical response of electrochemical biosensors (Silva et al. 2022). This occurs because there is better interaction between the biomolecules and these metals.

Thus, the availability of different polymers allows for customized systems that can assist in the interaction of these biomolecules, improving the performance of the biosensor. There are reports in the literature that electrodes based on thermoplastic polyurethane (TPU) can be modified with Prussian blue and carbon black nanoparticles, increasing the interaction with the target species (Gullo et al. 2025). This happens because the thermoplastic has a strong interaction with the other species, making the product perform better.

However, commercial graphene and PLA filaments, which are already commonly used in the fabrication of three-electrode systems, can undergo an electrochemical or chemical pretreatment process, exposing the conductive particles on the surface that will interact strongly with substrates to produce electrochemical biosensors. In this way, it favors the interaction with biomarkers of viral and neuropsychiatric diseases (Kalinke et al. 2021).

3D-printed electrodes can enhance sensitivity and even allow the simultaneous detection of nitrite and uric acid, enabling the analysis of multiple species within a single system (Cardoso et al. 2020). An indirect strategy is also possible, based on the immobilization of the enzyme glucose oxidase, which reacts with glucose to generate hydrogen peroxide as an electroactive byproduct (Wang & Pumera 2021).

Overall, the application of 3D printing in electroanalysis enables the development of diagnostic devices that are faster, more affordable, and customizable. The design flexibility allows the fabrication of miniaturized systems tailored to different contexts, including resource-limited settings. Moreover, these biosensors can be applied to the monitoring of biomarkers associated with chronic and neurodegenerative diseases, such as Parkinson’s disease, as well as in the evaluation of cholesterol and blood glucose levels (Kalinke et al. 2023b, Koukouviti & Kokkinos 2021, Calabria et al. 2023).

Another strategy explored to improve the performance of conductive filaments involves the incorporation of oils or plasticizing agents into the polymer matrix. These additives can enhance filament processability, flexibility, and the dispersion of conductive fillers, ultimately improving the electrochemical properties of the printed electrodes. An example is the work by (Sales da Rocha et al. 2026), who developed a conductive filament composed of graphite, castor oil, and polylactic acid (PLA). The resulting 3D-printed electrodes were employed to fabricate electrochemical sensing platforms, including a label-free immunosensor obtained through covalent immobilization of anti-clusterin antibodies on the electrode surface for the detection of the neurodegenerative biomarker clusterin. This study demonstrates that oil-based conductive filament formulations can serve as low-cost and versatile substrates for the development of electrochemical biosensors after appropriate surface modification.

Table IV summarizes examples of biosensors developed by additive manufacturing for the detection of biological species in real samples, highlighting the potential of these platforms in terms of wide linear ranges and low detection limits (LOD).

Table IV
Biosensors produced by additive manufacturing using different conductive filaments.

OTHER SENSORS PRODUCED BY ADDITIVE MANUFACTURING FOR VARIOUS APPLICATIONS

Pressure sensors

This class of sensors aims to measure any force applied to the surface of a piezoelectric material, generating an electrical current as a response (Jiang et al. 2022). They are highly relevant in healthcare applications, as well as in the automotive and aerospace industries. Their main advantages include the simplicity of preparation and low energy consumption (Gasperini et al. 2024, Hossain et al. 2024, Sanz-Pena et al. 2023).

The construction of these sensors can occur in two different ways: using conductive filaments with piezoelectric properties or by depositing material onto a piezoelectric substrate. In the first case, incorporating piezoelectric properties into the conductive material simplifies sensor fabrication by reducing substrate preparation steps (Kwon et al. 2021, Jin et al. 2025). In contrast, pressure sensors based on piezoelectric substrates with electrodes printed on their surface exhibit higher sensitivity (Sanz-Pena et al. 2023, Shahane et al. 2024).

Piezoelectric sensors can be applied to patients with diabetic foot syndrome through the insertion of optical waveguides into orthoses below the knee. These devices aim to assess the force exerted by the patient and, consequently, enable the development of prostheses with greater durability (Shahane et al. 2024). Moreover, the production of wearable sensors allows the integration of mechanical metamaterials for more versatile detection (Sanz-Pena et al. 2023). The incorporation of additional components into these devices enhances performance, broadens the range of measurable pressures, improves sensitivity, and maintains their relatively low production cost (Liu et al. 2020).

These sensors can be produced from different polymers using the FDM technique. Prototypes are initially designed in CAD software, printed, and subsequently subjected to resistance tests. Furthermore, studies have investigated the effect of thermal treatments, based on heating and cooling cycles, to improve device performance against temperature variations that could cause structural deformations. This process is essential to ensure greater sensor durability (Kwon et al. 2021).

Innovations in piezoelectric sensors are diverse, especially with the use of 3D printing as a production alternative. Many researchers are focused on developing more flexible and adaptable sensors, with emphasis on the detection of biological fluids and monitoring of human movements, aimed at advancing prosthesis development (Jin et al. 2025).

Tactile skin sensors

Tactile skin sensors, also referred to as wearable sensors, mimic human skin by detecting variations such as temperature, deformations, and vibrations. One of the major challenges in this field is the development of slightly curvilinear sensors, since human skin does not present a completely flat surface. Technological advances have enabled the development of materials with greater flexibility and adaptability in this class of sensors. In this context, membranes and thin films can be produced through additive manufacturing for applications such as tactile skin sensors (Emon et al. 2022).

These sensors can be applied directly under the skin, provided they have sufficient mobility for adaptation and enhanced durability. Wearable sensors can be fabricated using different 3D printing techniques, such as DLP, and applied for temperature and contact force measurements, with the purpose of advancing robotics and improving force control in robotic interactions with surfaces (Wang et al. 2021).

Most tactile sensors have been developed for robotic applications, frequently in association with pressure sensors. Consequently, different materials have been investigated to enable the development of foldable sensors, artificial skins, and touch-sensitive surfaces, resembling the human sensory system (Zhou & Lee 2021).

3D printing is widely employed in this field due to its ability to produce complex and versatile prototype designs (Zhou & Lee 2021, Kalkal et al. 2021). The incorporation of metallic nanoparticles into wearable sensors, using silicone substrates, has even made it possible to measure arterial pulse, a goal that, until recently, might have been considered unfeasible (Lo et al. 2020).

Temperature sensors

Many temperature sensors are designed for industrial applications, as thermal control is one of the greatest challenges in experiments affected by abrupt temperature variations. The development of temperature sensors capable of detecting small changes in specific locations has been facilitated by additive manufacturing. The response of these sensors can be evaluated through the thermoelectric effect. Highly conductive particles, such as carbon nanotubes, are commonly used as precursor materials, which can be doped with organic species to enhance sensitivity (Hwang et al. 2024).

These sensors may employ conductive particles applied either individually or in combination with insulating materials. Furthermore, multiple hybrid layers can be constructed depending on the intended application. In engineering, such sensors are essential, as they can respond based on electrical resistance or thermal variations in semiconductors. In many devices, conductive particles are incorporated to improve the response (Steckiewicz et al. 2021).

The base of these sensors can be fabricated via FDM using an insulating material. Areas with conductive pathways are strategically designed on the surface to maintain adequate conductive paths and ensure coherent resistance values. Nevertheless, it is necessary to preserve device flexibility, allowing application on curved surfaces (Steckiewicz et al. 2021).

Additionally, optical fiber sensors can be fabricated through DLP technology to simultaneously detect temperature and ultraviolet radiation, exhibiting high sensitivity in both responses (Chekkaramkodi et al. 2025).

Humidity sensors

This class of sensors has broad applications in agriculture, environmental preservation, the development of sustainable packaging, and healthcare through wearable sensors. Their purpose is to detect variations or the presence of relative humidity in food samples, soil, wood, paper, human skin, and construction materials, thus preventing degradation over time (Lukacs et al. 2024, Pradela-Filho et al. 2024).

Ceramic materials offer the advantage of resistance to highly corrosive environments, which increases the durability of humidity sensors. Accordingly, such sensors can be produced by the DLP technique and sintered at different temperatures. However, these materials require strict porosity control, since porosity directly influences surface area (Milovanov et al. 2024).

Moreover, the production of comb-like electrodes becomes feasible by depositing conductive material onto thin films. When a liquid substance comes into contact with the electrodes, capacitance changes occur, which can be measured by a specific device (Lukacs et al. 2024).

Within the context of this review, it is worth emphasizing that additive manufacturing has wide application across different fields of knowledge, including engineering, chemistry, physics, agriculture, medicine, textiles, and food science. Technological progress has driven 3D printing toward the creation of complex models and accelerated the production of parts and devices. Furthermore, the technique has contributed to reducing manufacturing costs through material savings and decreased labor requirements. The development of novel designs has enabled the creation of sensors capable of detecting a wide variety of species.

Recently, additive manufacturing has gained ground in several strategic sectors, such as automotive, food, and medical industries, enabling the production of functional components with advanced geometries. The integration of computational tools further expands the possibilities for customization of devices, prostheses, and sensors. Advances in this technique have allowed the development of new materials with diverse applications. Figure 5 illustrates the different possibilities of 3D printing in areas such as medicine, engineering, food industry, and the development of new devices and electrochemical sensors.

Figure 5
Schematic representation of the different applications of 3D printing across various fields of knowledge and industry, including prostheses, automotive components, the food industry, as well as analytical devices and electrochemical sensors

CONCLUSIONS AND PERSPECTIVES

Additive manufacturing has established itself as a versatile and transformative technology across industrial and academic settings due to its design flexibility, ease of customization, rapid prototyping, and cost-effective fabrication. In the field of electrochemical sensors and biosensors, 3D printing has enabled the development of customized conductive filaments, miniaturized sensing platforms, portable analytical devices, and integrated systems with complex geometries that would be difficult to achieve using conventional manufacturing techniques. These advances have expanded the possibilities for integrating functional materials with device architectures, accelerating the design and fabrication of next-generation sensing platforms.

Despite these significant advances, the electrical performance of currently available conductive filaments still generally falls short of that achieved with conventional electrode materials. In addition, several challenges continue to limit the widespread implementation of 3D-printed electrochemical devices, including the optimization of printing parameters, reproducibility between fabrication batches, surface activation procedures, and the lack of standardized manufacturing and characterization protocols. These limitations hinder direct comparison among studies, reduce experimental reproducibility, and remain major obstacles to the translation of laboratory-scale prototypes into reliable commercial technologies.

Future research is expected to focus on the development of advanced conductive composites with improved electrical and mechanical properties, innovative surface functionalization strategies, and the integration of 3D-printed sensors with microfluidic platforms, wireless communication systems, flexible electronics, and Internet of Things (IoT) technologies for real-time and remote monitoring. At the same time, ensuring long-term stability, durability, analytical reliability, and user-friendly operation will be essential to facilitate the transition from proof-of-concept devices to practical applications.

Beyond conventional electrochemical sensing, recent advances demonstrate that 3D-printed biosensors are rapidly expanding into new application areas, including viral diagnostics, multimodal sensing, chiral analysis, direct-electron-transfer enzymatic biosensors, and bioelectronic interfaces capable of monitoring cellular and tissue activity with high spatiotemporal resolution. Examples include highly sensitive immunosensors and genosensors for SARS-CoV-2 detection, wearable biosensors for continuous health monitoring, smartphone-integrated analytical devices, and self-rolled three-dimensional biosensor arrays designed for electrophysiological recording from three-dimensional cell cultures and organoids. These developments highlight the increasing convergence between additive manufacturing, advanced materials, electronics, and biomedical engineering.

Overall, the current evidence indicates that 3D-printed electrochemical sensors and biosensors are evolving toward multifunctional, wearable, implantable, multiplexed, and point-of-care analytical platforms capable of providing decentralized, real-time analysis in both clinical and environmental settings. Their ability to operate in resource-limited environments, where access to sophisticated laboratory infrastructure is restricted, represents one of their greatest advantages for expanding access to diagnostics and environmental monitoring. Although considerable progress has been achieved over the past decade, overcoming challenges related to material performance, device durability, large-scale manufacturing, reproducibility, and regulatory standardization will be crucial for enabling the successful commercialization and widespread adoption of these technologies.

Acknowledgements

The authors gratefully acknowledge the funding agencies FAPESP (2023/06793-4), Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, 312698/2026-7,406958/2022-0 [INCT-SP], 408338/2024-5 [INCTBio-LK] 301796/2022-0, 401977/2023-4, and 405924/2022-4), FINEP (01.22.0179.00, MARTMA project), FAPEMIG and Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES, 001 and INCTNanoAgro #88887.953443/2024-00).

Data availability

Data sharing does not apply to this article as no new data were created or analyzed in this study. All data supporting this review are available in the cited literature.

References

  • ABDALLA A & PATEL BA. 2021. 3D Printed Electrochemical Sensors. Annu Rev Anal Chem (Palo Alto Calif) 14: 47-63.
  • ABISUGA OA & DE BEER D. 2023. The opportunities of additive manufacturing in the creative industries: a bibliometric analysis. Progr Addit Manufact 8: 1179-1193.
  • AGRAWAAL H & THOMPSON JE. 2021. Additive manufacturing (3D printing) for analytical chemistry. Talanta Open 3.
  • ALSABHI R, DAVIES A, BINGHAM G & SHEN J. 2023. 3D Printing Based on Material Extrusion to Create Surface Patterns on Textile Fabrics. Fiber Polym 24: 4073-4088.
  • ARANTES IVS, CRAPNELL RD, BERNALTE E, WHITTINGHAM MJ, PAIXAO T & BANKS CE. 2023. Mixed Graphite/Carbon Black Recycled PLA Conductive Additive Manufacturing Filament for the Electrochemical Detection of Oxalate. Anal Chem 95: 15086-15093.
  • AREFIN AME, KHATRI NR, KULKARNI N & EGAN PF. 2021. Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications. Polymers (Basel) 13.
  • AVINASH TG, ALTHAF KA, VARMA YADU R, NOWSHAD SHABEEB K & RAGHAV GR. 2024. A Review on Additive Manufacturing Process. Metallof I Noveish Tekhnol 45: 795-811.
  • BERNALTE E, CRAPNELL RD, EL AZIZI R, AUGUSTO KKL & BANKS CE. 2025. Gold nanoparticle infused castor oil for the production of high performance conductive additive manufacturing filament. Applied Materials Today 42.
  • BERNARDO MP, DA SILVA BCR & MATTOSO LHC. 2021. Development of three-dimensional printing filaments based on poly(lactic acid)/hydroxyapatite composites with potential for tissue engineering. J Compos Mat 55: 2289-2300.
  • BERTSCH P, DIBA M, MOONEY DJ & LEEUWENBURGH SCG. 2023. Self-Healing Injectable Hydrogels for Tissue Regeneration. Chem Rev 123: 834-873.
  • CALABRIA D ET AL. 2023. Smartphone-based 3D-printed electrochemiluminescence enzyme biosensor for reagentless glucose quantification in real matrices. Biosens Bioelectron 227: 115146.
  • CALDAS NM, BATISTA AG, DE CARVALHO GSG, D’AMATO DL, RONCONI CM, DA SILVA FDC, DE FARIA LV, ROCHA DP & DORNELLAS RM. 2026. A new carbon–kaolinite composite conductive filament for 3D-printed electrochemical tyrosine sensors. Electrochimica Acta 554.
  • CALDAS NM ET AL. 2025. Lab-created conductive filament based on nickel and graphite particles: An attractive material for the additive manufacture of enhanced electrochemical sensors for non-enzymatic and selective glucose sensing. Talanta 287: 127686.
  • CAMARGO JR, CRAPNELL RD, BERNALTE E, CUNLIFFE AJ, REDFERN J, JANEGITZ BC & BANKS CE. 2024. Conductive recycled PETg additive manufacturing filament for sterilisable electroanalytical healthcare sensors. Appl Mat Today 39.
  • CÂNDIDO TCDO, SILVA DND, BORGES MMC, BARBOSA TG, TRINDADE SODD & PEREIRA AC. 2024. 3D-Printed Electrochemical Sensors: A Comprehensive Review of Clinical Analysis Applications. Analytica 5: 552-575.
  • CARDOSO RM, SILVA PRL, LIMA AP, ROCHA DP, OLIVEIRA TC, DO PRADO TM, FAVA EL, FATIBELLO-FILHO O, RICHTER EM & MUÑOZ RAA. 2020. 3D-Printed graphene/polylactic acid electrode for bioanalysis: Biosensing of glucose and simultaneous determination of uric acid and nitrite in biological fluids. Sensors and Actuators B: Chemical 307.
  • CARVALHO V, GONCALVES I, LAGE T, RODRIGUES RO, MINAS G, TEIXEIRA S, MOITA AS, HORI T, KAJI H & LIMA RA. 2021. 3D Printing Techniques and Their Applications to Organ-on-a-Chip Platforms: A Systematic Review. Sensors (Basel) 21.
  • CASTRO SVF, PEREIRA JFS, SOUZA MMC, SIQUEIRA GP, SANTANA MHP, RICHTER EM & MUNOZ RAA. 2024. Rapid sequential determination of the explosives 2,4,6-trinitrotoluene and cyclotrimethylenetrinitramine in forensic samples employing a graphite sheet sensor and cyclic square-wave stripping voltammetry. Mikrochim Acta 191: 396.
  • CHAN HN, TAN MJA & WU H. 2017. Point-of-care testing: applications of 3D printing. Lab Chip 17: 2713-2739.
  • CHEKKARAMKODI D, AHMED I, AL-RUB RKA, SCHIFFER A & BUTT H. 2025. 3D-printed multi-material optical fiber sensor for dual sensing applications. Advanced Composites and Hybrid Materials 8.
  • CONTRERAS-NARANJO JE, PEREZ-GONZALEZ VH, MATA-GÓMEZ MA & AGUILAR O. 2021. 3D-printed hybrid-carbon-based electrodes for electroanalytical sensing applications. Eletrochem Comm 130.
  • COOK SR, BALL AG, MOHAMMAD A & POMPANO RR. 2025. A 3D-printed multi-compartment organ-on-chip platform with a tubing-free pump models communication with the lymph node. Lab Chip 25: 155-174.
  • CRAPNELL RD, ARANTES IVS, CAMARGO JR, BERNALTE E, WHITTINGHAM MJ, JANEGITZ BC, PAIXAO T & BANKS CE. 2024. Multi-walled carbon nanotubes/carbon black/rPLA for high-performance conductive additive manufacturing filament and the simultaneous detection of acetaminophen and phenylephrine. Mikrochim Acta 191: 96.
  • DA SILVA VAOP, STEFANO JS, KALINKE C, BONACIN JA & JANEGITZ BC. 2023. Additive Manufacturing Sensor for Stress Biomarker Detection. Chemosens 11.
  • DADASHI A & AZADI M. 2022. Experimental bending fatigue data of additive-manufactured PLA biomaterial fabricated by different 3D printing parameters. Progress in Additive Manufacturing 8: 255-263.
  • DE FARIA LV ET AL. 2024. Graphite/Aluminum oxide/polylactic acid composite material: A valuable strategy for additively manufacturing cheap and improved electrochemical platforms for sensing sulfamethoxazole in honey samples. Electrochimica Acta 495.
  • DE SOUSA CS, DE OLIVEIRA JUNIOR JA, CALDAS NM, DOS SANTOS NETO AG, DA COSTA DO, RONCONI CM, DORNELLAS RM & JOST CL. 2026. Low-cost 3D-printed graphite/AgNPs/PLA electrode for the electrochemical detection of rutin in pharmaceutical samples. Electrochimica Acta 567.
  • DOS SANTOS DM, CARDOSO RM, MIGLIORINI FL, FACURE MHM, MERCANTE LA, MATTOSO LHC & CORREA DS. 2022. Advances in 3D printed sensors for food analysis. TrAC Trends in Analytical Chemistry 154.
  • EMON OF, ALKADI F, KIKI M & CHOI J-W. 2022. Conformal 3D printing of a polymeric tactile sensor. Additive Manufacturing Letters 2.
  • FERREIRA B, BERNALTE E, CRAPNELL RD, AUGUSTO KKL, LOMESH U, KHAN MA, FATIBELLO-FILHO O, PAIXÃO TRLC & BANKS CE. 2025. Microcrystalline Cellulose-Infused Additive Manufactured Filaments: A Sustainable Path to Enhancing Electrochemical Sensors. ACS Appl Eng Mat 3(6): 1759-1769. https://doi.org/10.1021/acsaenm.5c00233.
    » https://doi.org/10.1021/acsaenm.5c00233
  • FERREIRA PA, DE OLIVEIRA FM, DE MELO EI, DE CARVALHO AE, LUCCA BG, FERREIRA VS & DA SILVA RAB. 2021. Multi sensor compatible 3D-printed electrochemical cell for voltammetric drug screening. Anal Chim Acta 1169: 338568.
  • FLORES D, NOBOA J, TARAPUES M, VIZUETE K, DEBUT A, BEJARANO L, STREITWIESER DA & PONCE S. 2022. Simple Preparation of Metal-Impregnated FDM 3D-Printed Structures. Micromachines (Basel) 13.
  • GABALSKI MA, SMITH KR, HIX J & ZINN KR. 2023. Comparisons of 3D printed materials for biomedical imaging applications. Sci Technol Adv Mater 24: 2273803.
  • GASPERINI D, COSTA F, MANARA G & GENOVESI S. 2024. Low-Profile Radio Frequency Pressure Sensor Based on Additive Manufacturing Technology. IEEE Sens J 24: 5976-5985.
  • GUGGENBILLER G, BROOKS S, KING O, CONSTANT E, MERCKLE D & WEEMS AC. 2023. 3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing. ACS Applied Polymer Materials 5: 3201-3229.
  • GULLO L, BRUNELLESCHI B, DURANTI L, FIORE L, MAZZARACCHIO V & ARDUINI F. 2025. 3D printed shamrock-like electrochemical biosensing tool based on enzymatic inhibition for on-line nerve agent measurement in drinking water. Biosens Bioelectron 282: 117471.
  • HASSAN MS ET AL. 2022. Selective laser sintering of high temperature thermoset. In: Behavior and Mechanics of Multifunctional Materials XVI, 2022.
  • HENRIQUES BF, NEUMANN A, BERTOLIM LV, DE FREITAS RC, SILVA LRG, STEFANO JS & JANEGITZ BC. 2025. Development and Application of 3D-Printed Electrochemical Sensors for Ciprofloxacin Detection. Electroanalysis 37.
  • HOSSAIN MJ, TABATABAEI BT, KIKI M & CHOI J-W. 2024. Additive Manufacturing of Sensors: A Comprehensive Review. International J Precis Eng Manufact Green Technol 12: 277-300.
  • HUSSAN JKS, SUBRAMANIAM MP, KENZ MKT, SREERAM P, PARVATHI S, PS S, PULLANCHIYODAN A, MULHIVILL DM & RAGHAVAN P. 2024. Fabrication and challenges of 3D printed sensors for biomedical applications-Comprehensive review. Results in Engineering 21.
  • HWANG S, JANG D, KIM H, KWAK J & CHUNG S. 2024. 3D-Printed Soft Temperature Sensors Based on Thermoelectric Effects for Fast Mapping of Localized Temperature Distributions. ACS Appl Mater Interfaces 16: 25071-25079.
  • JIANG Y, ISLAM MN, HE R, HUANG X, CAO PF, ADVINCULA RC, DAHOTRE N, DONG P, WU HF & CHOI W. 2022. Recent Advances in 3D Printed Sensors: Materials, Design, and Manufacturing. Adv Mat Technol 8.
  • JIN Y, XUE SA & HE YJAM. 2025. Flexible Pressure Sensors Enhanced by 3D-Printed Microstructures. Adv Mat 37(27): 2500076. https://doi.org/10.1002/adma.202500076.
    » https://doi.org/10.1002/adma.202500076
  • KADIAN S, SAHOO SS, SHUKLA S & NARAYAN RJ. 2025. Development of 3D-printed conducting microneedle-based electrochemical point-of-care device for transdermal sensing of chlorpromazine. Journal of Materials Chemistry B 13: 2114-2123.
  • KAFLE A, LUIS E, SILWAL R, PAN HM, SHRESTHA PL & BASTOLA AK. 2021. 3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA). Polymers (Basel) 13.
  • KALINKE C, CRAPNELL RD, SIGLEY E, WHITTINGHAM MJ, DE OLIVEIRA PR, BRAZACA LC, JANEGITZ BC, BONACIN JA & BANKS CE. 2023a. Recycled additive manufacturing feedstocks with carboxylated multi-walled carbon nanotubes toward the detection of yellow fever virus cDNA. Chem Eng J 467.
  • KALINKE C, DE OLIVEIRA PR, BANKS CE, JANEGITZ BC & BONACIN JA. 2023b. 3D-printed immunosensor for the diagnosis of Parkinson’s disease. Sensors and Actuators B: Chemical 381.
  • KALINKE C, NEUMSTEIR NV, ROBERTO DE OLIVEIRA P, JANEGITZ BC & BONACIN JA. 2021. Sensing of L-methionine in biological samples through fully 3D-printed electrodes. Anal Chim Acta 1142: 135-142.
  • KALKAL A, KUMAR S, KUMAR P, PRADHAN R, WILLANDER M, PACKIRISAMY G, KUMAR S & MALHOTRA BD. 2021. Recent advances in 3D printing technologies for wearable (bio)sensors. Additive Manufacturing 46.
  • KALLIGOSFYRI PM, IULA G, NOTA G, PERSICO G, PRIMICERI D & CINTI S. 2026. 3D-printed architectures for (bio)sensing. Biosensors and Biomolecular Electronics 1.
  • KHAJAVI SH. 2021. Additive Manufacturing in the Clothing Industry: Towards Sustainable New Business Models. Applied Sciences 11.
  • KOUKOUVITI E, ECONOMOU A & KOKKINOS C. 2025. 3D Printed Electrochemical Biometric Bracelet for Smartwatches. ACS Electrochemistry 1: 1619-1624.
  • KOUKOUVITI E & KOKKINOS C. 2021. 3D printed enzymatic microchip for multiplexed electrochemical biosensing. Anal Chim Acta 1186: 339114.
  • KWON HJ, LEE S, KIM J-H & KIM J. 2021. 3D-printed pressure sensor with heterogeneous polymer material and annealing effect. In: Nano-, Bio-, Info-Tech Sensors and Wearable Systems.
  • LABUDA J ET AL. 2026. Flow-through analytical systems and microsystems with electrochemical detection for monitoring of biologically active species (IUPAC Technical Report). Pure Appl Chem 98: 329-365.
  • LI B, MENG L, WANG H, LI J & LIU C. 2018. Rapid prototyping eddy current sensors using 3D printing. Rapid Prototyp J 24: 106-113.
  • LIGON SC, LISKA R, STAMPFL J, GURR M & MULHAUPT R. 2017. Polymers for 3D Printing and Customized Additive Manufacturing. Chem Rev 117: 10212-10290.
  • LISBOA TP, DE FARIA LV, DE OLIVEIRA WBV, OLIVEIRA RS, MATOS MAC, DORNELLAS RM & MATOS RC. 2023. Cost-effective protocol to produce 3D-printed electrochemical devices using a 3D pen and lab-made filaments to ciprofloxacin sensing. Mikrochim Acta 190: 310.
  • LIU G ET AL. 2021. Additive manufacturing of structural materials. Mat Sci Eng: R: Reports 145.
  • LIU M, ZHANG Q, ZHAO Y, LIU C, SHAO Y & TONG X. 2020. A high sensitivity micro-pressure sensor based on 3D printing and screen-printing technologies. Measur Sci Technol 31: 035106.
  • LO LW, SHI H, WAN H, XU Z, TAN X & WANG C. 2020. Inkjet-Printed Soft Resistive Pressure Sensor Patch for Wearable Electronics Applications. Adv Mat Technol 5.
  • LUKACS P, LENGER T, VEHEC I & KRAJCSA M. 2024. Biodegradable Comb Sensor Based on 3D Printed Conductive Polylactic Acid. 2024 47th International Spring Seminar on Electronics Technology (ISSE): 1-4.
  • MAHAPATRA RK, KALIYATH Y, V SHET NS, SATAPATHI GS, MAHAPATRO SR & NAIDU ML. 2024. 3D-Printing Technology: A Review. In: 2024 Second International Conference on Intelligent Cyber Physical Systems and Internet of Things (ICoICI), p. 528-532.
  • MATIAS E & RAO B. 2015. 3D Printing: On Its Historical Evolution and the Implications for Business. IEEE J: 551-558.
  • MEHRPOUYA M, VAHABI H, JANBAZ S, DARAFSHEH A, MAZUR TR & RAMAKRISHNA S. 2021. 4D printing of shape memory polylactic acid (PLA). Polymer 230.
  • MILOVANOV Y, BERTERO A, COPPOLA B, PALMERO P & TULLIANI J-M. 2024. Mullite 3D Printed Humidity Sensors. Ceramics 7: 807-820.
  • NOFAR M, UTZ J, GEIS N, ALTSTADT V & RUCKDASCHEL H. 2022. Foam 3D Printing of Thermoplastics: A Symbiosis of Additive Manufacturing and Foaming Technology. Adv Sci (Weinh) 9: e2105701.
  • PEREIRA JFS ET AL. 2021. Reactive oxygen plasma treatment of 3D-printed carbon electrodes towards high-performance electrochemical sensors. Sensors and Actuators B: Chemical 347.
  • PETRONI JM, NEVES MM, DE MORAES NC, BEZERRA DA SILVA RA, FERREIRA VS & LUCCA BG. 2021. Development of highly sensitive electrochemical sensor using new graphite/acrylonitrile butadiene styrene conductive composite and 3D printing-based alternative fabrication protocol. Anal Chim Acta 1167: 338566.
  • PRADELA-FILHO LA, ARAUJO DAG, ATAIDE VN, MELONI GN & PAIXAO T. 2024. Challenges faced with 3D-printed electrochemical sensors in analytical applications. Anal Bioanal Chem 416: 4679-4690.
  • PRASOPDEE T, PANNOPPA T, PORBUN P, LUANGCHUANG P, PROMOPPATUM P & NAKARAMONTRI Y. 2023. Effect of the thermoplastic types and ratios for the 3D printed thermoplastic natural rubber vulcanizates: Mechanical, dynamical, thermal, printed-structural properties. Industr Crops Prod 203.
  • PRAVEENA BA, LOKESH N, ABDULRAJAK B, SANTHOSH N, PRAVEENA BL & VIGNESH R. 2022. A comprehensive review of emerging additive manufacturing (3D printing technology): Methods, materials, applications, challenges, trends and future potential. Materials Today: Proceedings 52: 1309-1313.
  • PU H, GUO Y, CHENG Z, CHEN Z, XIONG J, ZHU X & HUANG J. 2023. Projection Stereolithography 3D-Printed Bio-Polymer with Thermal Assistance. Polymers (Basel) 15.
  • RAMOS DLO, CRAPNELL RD, ASRA R, BERNALTE E, OLIVEIRA ACM, MUNOZ RAA, RICHTER EM, JONES AM & BANKS CE. 2024. Conductive Polypropylene Additive Manufacturing Feedstock: Application to Aqueous Electroanalysis and Unlocking Nonaqueous Electrochemistry and Electrosynthesis. ACS Appl Mater Interfaces 16: 56006-56018.
  • RAUCCI A, CIMMINO W, MANNA C, KALLIGOSFYRI PM, PERSICO G, SPINELLI M, AMORESANO A, ALAHMAD W & CINTI S. 2026. Fully 3D-Printed Sampling-to-Detection Electrochemical Platform for Point-of-Care Measurement of Salivary Uric Acid. ACS Meas Sci Au 6: 775-783.
  • SALES DA ROCHA G, DE SOUZA OLIVEIRA IV, BERTIN B, DOS SANTOS RODRIGUES L, FORNASIER F, VIANA RAMOS A, GOMES FERNANDES DA ROCHA G, NICOLINI JV, CONCEIÇÃO FERRAZ H & CANNIATTI BRAZACA L. 2026. Label-free 3D-printed electrochemical (bio)sensors for detection of biomarkers in neurodegenerative disorders. Microchem J 221: 116798.
  • SAMPAIO IS, JORGE EMDF, SOUZA JGD & CARDOSO HSP. 2022. Impressão 3d: Da Pesquisa Ao Setor Produtivo Um Estudo ExploratÓrio Sobre Sua EvoluÇÃo HistÓrica, Origem, Tecnologias, Aplicações E Inovações. Gestão & Planejamento 23: 751-777.
  • SANZ-PENA I, HOPKINS M, CARRERO NR & XU H. 2023. Embedded Pressure Sensing Metamaterials Using TPU-Graphene Composites and Additive Manufacturing. IEEE Sens J 23: 16656-16664.
  • SEDLACEK F, KALINA T & STEPANEK M. 2023. Optimization of Components with Topology Optimization for Direct Additive Manufacturing by DLMS. Materials (Basel) 16.
  • SELEMANI MA, CENHRANG K, AZIBERE S, SINGHATEH M & MARTIN RS. 2024. 3D printed microfluidic devices with electrodes for electrochemical analysis. Anal Methods 16: 6941-6953.
  • SHAHANE AM, SHROTRI A, WITTENBRÖKER C, STÜBBE O, GU B & CHEN H. 2024. Additively manufactured pressure sensor for embedding in 3D-printed below-knee orthosis. In: Laser 3D Manufacturing XI.
  • SHARMA P, HASAN MR, YARDIM A, CELIK EG, TIMUR S, ABDIN MZ & NARANG J. 2025. Next-Generation Point-of-Care Diagnostics: Silver Nanoparticle-Enhanced 3D-Printed Multiplex Electrochemical Biosensor for Detecting Dengue and Chikungunya Viruses. ACS Appl Bio Mater 8: 1251-1260.
  • SHARMA R, CHANDRA NATH P, KUMAR HAZARIKA T, OJHA A, KUMAR NAYAK P & SRIDHAR K. 2024. Recent advances in 3D printing properties of natural food gels: Application of innovative food additives. Food Chem 432: 137196.
  • SHI X, PU H, SHI LL, HE TC & CHEN J. 2025. Advancing transistor-based point-of-care (POC) biosensors: additive manufacturing technologies and device integration strategies for real-life sensing. Nanoscale 17: 9804-9833.
  • SILVA JPC, ROCHA RG, SIQUEIRA GP, NASCIMENTO CF, SANTANA MHP, NOSSOL E, RICHTER EM, DA SILVA IS & MUNOZ RAA. 2024. Bio-based plasticizer Babassu oil for custom-made conductive additive-manufacturing filaments: towards 3D-printed electrodes applied to cocaine detection. Mikrochim Acta 192: 47.
  • SILVA LRG, LOPES CEC, TANAKA AA, DANTAS LMF, SILVA IS & STEFANO JS. 2025. Electrochemical Biosensors 3D Printed by Fused Deposition Modeling: Actualities, Trends, and Challenges. Biosensors (Basel) 15.
  • SILVA LRG, STEFANO JS, ORZARI LO, BRAZACA LC, CARRILHO E, MARCOLINO-JUNIOR LH, BERGAMINI MF, MUNOZ RAA & JANEGITZ BC. 2022. Electrochemical Biosensor for SARS-CoV-2 cDNA Detection Using AuPs-Modified 3D-Printed Graphene Electrodes. Biosensors (Basel) 12.
  • SIQUEIRA GP, ROCHA RG, MARRA MC, SANTANA MHP, RICHTER EM & MUNOZ RAA. 2025. Additively Manufactured Electrodes for Simultaneous Detection of 2,4,6-Trinitrotoluene and Cyclotrimethylenetrinitramine in Postexplosive Residues and Environmental Samples. ACS Omega 10: 31577-31586.
  • STECKIEWICZ A, KONOPKA K, CHOROSZUCHO A & STANKIEWICZ JM. 2021. Temperature Measurement at Curved Surfaces Using 3D Printed Planar Resistance Temperature Detectors. Electronics 10.
  • STEFANO JS, SILVA L & JANEGITZ BC. 2022. New carbon black-based conductive filaments for the additive manufacture of improved electrochemical sensors by fused deposition modeling. Mikrochim Acta 189: 414.
  • TEEKAYUPAK K, AUMNATE C, LOMAE A, PREECHAKASEDKIT P, HENRY CS, CHAILAPAKUL O & RUECHA N. 2023. Portable smartphone integrated 3D-Printed electrochemical sensor for nonenzymatic determination of creatinine in human urine. Talanta 254: 124131.
  • TING GHA, TAY YWD, QUAH TKN, TAN MJ & WONG TN. 2024. Sustainable Support Material for Overhang Printing in 3D Concrete Printing Technology. Appl Sci 14.
  • VOLPATO N 2021. Manufatura aditiva: tecnologias e aplicações da impressão 3D. Editora Blucher, 181-266 p.
  • WAN M, JIMU A, YANG H, ZHOU J, DAI X, ZHENG Y, OU J, YANG Y, LIU J & WANG L. 2023. MXene quantum dots enhanced 3D-printed electrochemical sensor for the highly sensitive detection of dopamine. Microchem J 184.
  • WANG J ET AL. 2024. 3D Printing of Metals with sub-10 microm Resolution. Small 20: e2406518.
  • WANG L & PUMERA M. 2021. Covalently modified enzymatic 3D-printed bioelectrode. Mikrochim Acta 188: 374.
  • WANG Y, JIN J, LU Y & MEI D. 2021. 3D Printing of Liquid Metal Based Tactile Sensor for Simultaneously Sensing of Temperature and Forces. Int J Smart Nano Mat 12: 269-285.
  • YU Y, JIANG M, WANG S, GUO Y, JIANG T, ZHENG Z, HUANG S, CUI T & SHA K. 2021. Dynamic evolution simulation of sintering pool in selective laser sintering walnut shell/Co-PES composite. Optics & Laser Technology 144.
  • ZHAI H ET AL. 2025. Review on the 3D printing technology and application of magnetic materials: Material-process-structure-application. Composites Part B: Engineering 298.
  • ZHENG Y, HUANG X, CHEN J, WU K, WANG J & ZHANG X. 2021. A Review of Conductive Carbon Materials for 3D Printing: Materials, Technologies, Properties, and Applications. Materials (Basel) 14.
  • ZHOU H, YANG H, YAO S, JIANG L, SUN N & PANG H. 2022. Synthesis of 3D printing materials and their electrochemical applications. Chinese Chem Lett 33: 3681-3694.
  • ZHOU X & LEE PS. 2021. Three-dimensional printing of tactile sensors for soft robotics. MRS Bulletin 46: 330-336.

Correspondence

Correspondence to: Bruno Campos Janegitz brunocj@ufscar.br

Handling editor

Jamal Rafique

Publication Dates

  • Publication in this collection
    16 Nov 2026
  • Date of issue
    2026

History

  • Received
    8 May 2026
  • Accepted
    11 Sept 2026
location_on
Academia Brasileira de Ciências Rua Anfilófio de Carvalho, 29, 3º andar, 20030-060 Rio de Janeiro RJ Brasil, Tel: +55 (21) 2391-7901 - Rio de Janeiro - RJ - Brazil
E-mail: aabc@abc.org.br
rss_feed Stay informed of issues for this journal through your RSS reader
Go to top